Chaney Instrument 00991 Users Manual

HHiixxssoonn TTeemmpp TTaag

g

Hixson

Version 5.0

st

Nov 2005

5

Chaney Instrument Co.

Hong Kong Primex Asia Limited ShenZhen Representative office

香港普耐美亚洲有限公司深圳代表处
AB,29/F HAIYING BUILDING SOUTH CAITIAN ROAD FUTIAN DISTRICT SHENZHEN
CHINA
深圳市福田區彩田南路海鷹大廈 29 樓 AB 室

Hixson Temp Tag (V5.00)-

mmaannuuaall

A．Foreword

The user is cautioned that changes or modifications not expressly approved by Chaney
Instruments Co. could void the user's authority to operate the equipment.

15.105:
For a Class B digital device or peripheral, the instructions furnished the user shall include the
following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipm ent
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.

15.19 (labeling not on EUT due to size must be in manual:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

1

1. Definition list

Sender: A wireless sending module.
Receiver : A wireless receiving module which displays temperature.

B．Functional Specification

1. Features:

a. Temperature Range: 80`F-120`F
b. The system included a receiver and a sender.

Copyright@2005 Chaney Instrument Co Inc. –All rights reserved