Chaney Instrument 00884 User Manual

00884

Digital Thermometer with Probe

Measures indoor & outdoor temperature

MIN/MAX temperature readout with memory

Wide temperature range -58˚F to 158˚F

Folding stand or wall mount

10' Weather-proof sensor wire

INSTALLATION INSTRUCTIONS:

The unit: Choose a suitable space away from direct sunlight, heating and air conditioning vents.
Option 1: Install wall mount bracket with enclosed 2 screws or double sided tape.
  Hang unit on mounted bracket.
Option 2: Use flip-down stand to display on flat surface.

The outside sensor:
Make sure that the remote sensor wire will reach outside before mounting the unit. Remove the
protective paper from sensor, press firmly in position free from direct sunlight and heavy saturation.
For Auto: an ideal position is behind the front bumper, not directly in the wind stream. Avoid engine
or radiator heat.

Normal display shows inside and outside temperature in 1/10 degree.

MIN MAX MEMORY

Press the MIN MAX MEMORY button once, maximum and miminum indoor temperature will be
shown. Press the MIN MAX MEMORY button twice, maximum and miminum outdoor temperature
will be shown. The display willl show normal temperature if the button is pushed a third time, or if
after 8 seconds, no button is pushed. To delete all stored MIN MAX MEMORY records, push the
CLEAR button. New memory can be recorded instantly when display turns back to normal
temperature mode.

LIMITED WARRANTY

Any Chaney instrument which proves
to be defective in material or
workmanship within one year of

LAKE GENEVA, WI 53147

www.chaneyinstrument.com

original purchase will be repaired or
replaced. This warranty does not
cover damage in shipment or failure
caused by tampering, carelessness
or abuse.