Chaney Instrument 00648SB User Manual

00648SB INST1118-05
00648SB / 00648GTSB Digital Cooking Thermometer & Timer
Do not return product to retail store.
For Technical Assistance and product return information,
please call Chaney Instrument Co. direct at:
877-221-1252
ALARM OFF/ON
+
HR
START/STOP
MODE
TEMP. PROBE
INCLUDED IN THIS PACKAGE: (1) digital cooking thermometer (1) 3 foot cord and therm. probe (1) self-adhesive magnet
Please read all instructions prior to using this instrument.
Features
• 3-line LCD shows cook temperature, set temperature and timer for BBQ or Oven cooking.
• Programmable temperature alert
• Programmable timer alert- MAX TIME 23 hrs. 59 mins. High temperature probe with 3 foot cord withstands temp. up to 700ºF
• Temperature range of 32ºF to 392ºF (0ºC to 200ºC)
• Low battery indicator
• Requires 2 “AAA” Alkaline batteries (not included)
COOK
SET
TIMER
-
HR
+
HR
START/STOP
MODE
Main Function Buttons
14
OFF
-
HR
POWER OFF/ON
Set-Up
Battery Installation
Install 2 “AAA” (1.5v) alkaline batteries (not included) as shown on the diagram inside the battery compartment. Slide the “POWER SWITCH” to “ON.”
(bottom)
Slide to
Open
Setting the clock and thermometer
To set the clock to the correct time, first press the “MODE” button to enter into clock display mode. Next, hold the “MODE” button down until the time display begins to flash; then you may adjust the time using the “+HR” and “-MIN” buttons. Press the “MODE” button to confirm your time setting.
At this point you may select between 12 and 24 hour time formats by pressing the “HR” button. Then you may also choose ºC or ºF temperature display mode by pressing the “-MIN” button. To exit set-up mode and confirm your settings, press the “MODE” button.
Setting the target temperature
To set the target temperature, first press the “MODE” button until the time/clock is displayed. Press the “+HR” and “-MIN” buttons to set the target temperature. Slide the “alarm on/off” switch to “on” and the alarm will sound when the actual temperature reaches the target temperature.
Setting the timer
To set the timer, first press the “MODE” button to select TIMER. Press the “+HR” and “-MIN” to adjust the timer to the desired countdown time. Then press “START/STOP” to start and stop the timer. The unit will beep when the countdown reaches zero. To reset the count, stop the timer first and press “+HR” and “-MIN” together at the same time.
Low Battery Indicator
When this icon appears there is approximately 2 months of normal usage left.
Button Functions Quick Reference
Button
MODE +,HR
-,MIN
TOGETHER
START/STOP
ON/OFF ALARM
Press Once Hold for 3 seconds
select timer or clock mode set clock mode
set temp. advance, HR advance
set temp decrease, MIN decrease
resets timer when timer stopped
timer start and stop
slide switch to power on and off
slide switch temp. alarm on and off
fast set temp. advance
fast set temp. decrease
Meat-taste temperature Quick Reference
WELL-DONE MEDIUM MED.-RARE RARE
BEEF
GROUND BEEF
VEAL
LAMB
PORK
CHICKEN
TURKEY
170º
160º
170º
170º
170º
180º
180º
160º
N/A
160º
160º
160º
N/A
N/A
32
145º
N/A
145º
145º
N/A
N/A
N/A
140º
N/A
N/A
N/A
N/A
N/A
N/A
Loading...