Chandler Limited Little Devil Equalizer User Manual

Little Devil Equalizer - Designed by Wade Chandler Goeke

Prior to sending in your gear for repair, please contact our shop at the number below. We will assist you in trouble­shooting the problem and if needed, we will issue you an RMA# to send in the gear.

COMPATIBILTY­The Little Devil Equalizer is tested and proven to have no start up or power errors in these racks-

API 500v 10-slot with L200 PSU
API 500-6B Lunchbox
API 500-6B HC “new version” Lunchbox

BAE 11-slot with power one supply
BAE 6-slot portable with power one supply
BAE 6-slot with Avedis designed supply

Emperical Labs 2-slot (awesome rack and worth the money!)
A-Designs 2-slot

Purple Sweet 10

As of the release of this product we have not yet tested with the Radial Workhorse.

POWER SUPPLY RECOMMENDATIONS­With ANY 500 modules (not just the Devils) we recommend using a rack with external supply. We feel a
power supply in such close proximity to the right hand slots of the rack can cause hum and noise oor
issues with many modules by many manufacturers. For this reason we mainly recommend the API 500v
rack with external L200 supply and the BAE 11-slot with external supply.

NOTES on BAE racks­We recommend adding a wire from Earth to power supply common on all BAE racks. In many cases hum
can be avoided and Earth to common is standard procedure on most electronic equipment.

distinct sound that diers from modern gyrator parametric circuits. You'll nd the

parameteric, and plug in equalizers can’t touch the “cool” provided by the inductor

amount of overall boost and cut. If you need more boost/cut or want to “dig in”
to the track more you may nd switching to “hi Q” helps. If you’re looking for a
smoother EQ sound and more resolution try the “lo Q”. In my use I try each Q

+6

+5

+4

+3

+2

+1

-1

-2

-3

-4

-5

-6

0

+6

+5

+4

+3

+2

+1

-1

-2

-3

-4

-5

-6

0

110Hz

60Hz

+6

+5

+4

+3

+2

+1

-1

-2

-3

-4

-5

-6

0

1k2

OUT

3k3

4k7

5k6

6k8

8k2

220

OUT

330

390

470

560

820

LOW CUT

47Hz

82Hz

150Hz

BYPASS
ALL

IN

CE Certification

Chandler Limited declares under its sole responsibility that all products manufactured by them are in
compliance with EC directives 2004/108/EC Electromagnetic Compatibility; 2004/108/EG
Electromagnetic Compatibility; 2006/95/EC Low Voltage Equipment Safety.