Chanams CB14202S User Manual

Name of Product

354 350

T

4문hu

의

2

226

Fri 25 Sat 26

2015 December

Product Specification

Model No
Product Name
Operating Temp
Size
Weight
Communication
Operating Voltage

Upper Connector (510-eGo thread)

LED

Lower Connector(eGo thread)

CB14202S
Cigbit (E-cig Data transmitter)

-10˚C ~ 50˚C
14mm(ø) X 33mm

6.3 g

Bluetooth ® Smart Device 3.0V ~

4.2V

Explanation of Product

Cigbit transmits the data of smoking e-cigarette. All the
information can be checked at the application.

Cigbit can transmit the data immediately if it is connected with the smart phone.
Cigbit can store the data if it is not connected with the smart phone. When
the next connection, all the data will be transmitted.(up to 500)

How to Use

1. Unpack the package.

2. Connect with the E-Cigarette.

Compatibility

This product is well matched with cartomizers which have 510 or

eGo thread and battery having 510-eGo thread.

The other cartomizers cannot be connected.
This product is well connected with the batteries having 14mm-diameter.

Restriction on Usage

Do not connect the product with unauthenticated battery and cartomizer. Do
not connect the product with the battery whose voltage level is under
the 3.0V or over the 4.2V.

How to Update Firmware

1. After connecting to the USB charger included with the product,
connect to a computer’s USB port.

2. Run the application and register the device.

3. Push the Setting – Device firmware update.

4. After the update is completed, remove the module from the USB charger. ※

Do

not use the included USB charger for purposes other than firmware update.

How to Use

3. Download the Cigbit at Apple APP Store or Google Playstore.

4. After turn on the application and log-in, press the No Dev.

Caution

Do not disassemble and repair the product arbitrarily.

When an external shock is applied, there may be a great damage to the product.

product can be broken when you connecting excessive force.

Use standard type of e-cig.

Operating voltage of the product is from 3.0V to 4.2V. Product may not work

properly when the output of battery is lower than 3.0V and can be broken when higher than 4.2V

using product immediately when the product(e-cig) is too hot or working properly.

use included USB charger for purposes other than firmware update.

contact your dealer or the factory when the problem occurred. We will resolve quickly. Other

details and terms of the warranty is on the website.(www.thecigbit.com)

(e-cig battery : eGo-510 thread, Atomizer : 510 or eGo thread)

Do not

Please

The

Stop

How to Use

5. When starting scanning, press the E-Cig button for 1 second.

박현수투

오늘

기록

소셜

뉴스

설정

6. Now, you can use it!

0

6

0

2

5

5

at

6

e

2

c

mber

2

3

e

S

ri

D

F

2015

2

4

Thu

4

2

35

Trouble Shooting

Problem Cause Solution

LED is not working.

Product cannot be connected
with smartphone or smartphone
cannot count the number of
puffs.

E-cig is not working.

Battery is short state.

Product is blinking.

Product is not connected
with battery.

Bluetooth function of
smartphone is off.

The firmware is not latest
version.

E-cig battery is turned off.

Product is not connected
with atomizer.

Product is not compatible
with your e-cig.

If you have other problem, feel free to contact us. (www.thecigbit.com)

Check the status of
connection with battery.

Turn on the Bluetooth
function of smartphone.

Update firmware via
application.

Turn on the battery.

Check the status of
connection with atomizer.

Please cease to use and
contact to service center.

Certification Information

MSIP-CRM-Chs-CB14201S
MSIP-RRM-Chs-CB14202S

www.thecigbit.com

TEL : [phone] FAX : [phone]

Made in korea

FCC Warning Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the

•

following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved by

•

manufacturer could void the user's authority to operate the
equipment.

IC Warning Statement

This device complies with Industry Canada licence-exempt RSS standard(s).

•

Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.

•

Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.