OPERATOR’S MANUAL
ATV DROP BASKET
SAVE THESE INSTRUCTIONS
Important safety instructions
are included in this manual.
50007
MADE IN CHINA
REV 50007-20170206
MODEL NUMBER
12039 Smith Ave.
Santa Fe Springs CA 90670 USA
1-877-338-0999
www.championpowerequipment.com
Have questions or need assistance?
Do not return this product to the store!
WE ARE HERE TO HELP!
Visit our website:
www.championpowerequipment.com
for more info:
• Product Info and Updates
• Frequently Asked Questions
– or –
Call our Customer Care Team Toll-Free at:
• Tech Bulletins
• Product Registration
1-877-338-0999
Parts Ordering:
Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
For residents of California:
WARNING: This product contains chemicals known to the State of California to cause cancer or birth defects
and other reproductive harm.
*We are always working to improve our products. Therefore, the enclosed product may differ slightly from the image on the cover.
TABLE OF CONTENTS
Introduction ............................ 1
Assembly .............................. 2
Instructions .......................... 2
Installation on ATV ..................... 2
Specifications ........................... 3
Parts Diagram ......................... 3
Parts List ............................ 3
50007
ATV DROP BASKET
ENGLISH 50007
INTRODUCTION
Congratulations on your purchase of a Champion Power Equipment (CPE) product. CPE designs, builds, and supports
all of our products to strict specifications and guidelines. With proper product knowledge, safe use, and regular
maintenance, this product should bring years of satisfying service.
Every effort has been made to ensure the accuracy and completeness of the information in this manual, and we
reserve the right to change, alter and/or improve the product and this document at any time without prior notice.
Since CPE highly values how our products are designed, manufactured, operated and are serviced, and also highly
value your safety and the safety of others, we would like you to take the time to review this product manual and
other product materials thoroughly and be fully aware and knowledgeable of the assembly, operation, dangers and
maintenance of the product before use. Fully familiarize yourself, and make sure others who plan on operating the
product fully familiarize themselves too, with the proper safety and operation procedures before each use. Please
always exercise common sense and always err on the side of caution when operating the product to ensure no
accidents, property damage, or injury occurs. We want you to continue to use and be satisfied with your CPE product
for years to come.
Record the model and serial numbers as well as date and place of purchase for future reference. Have this
information available when ordering parts and when making technical or warranty inquiries.
Champion Power Equipment Support
1-877-338-0999
Model Number
50007
Serial Number
Date of Purchase
Purchase Location
1
50007 ENGLISH
Installation on ATV:
1. Position and place basket on ATV rack, aligning ATV
upright frame into basket slot.
2. Tilt small basket backward approximately 45 degrees
(as shown).
3. Position support brackets between ATV rack and
basket, install brackets (2) with self drilling/tapping
screws (2) to bottom of small basket with power drill/
driver.
ASSEMBLY
Instructions:
1. Align the pin on the small basket with the hole on the
large basket (A).
2. Push down the big basket so that the baskets lock in
place (B).
3. Secure the two baskets together using the hardware
provided (C).
4. Repeat action on both sides.
WARNING
When loading your basket do not exceed the ATV
manufacturers rack weight carrying capacity.
DO NOT use baskets to carry people or animals.
DO NOT use baskets for pulling or winching.
2
SPECIFICATIONS
9
10
1
4
8
8
2
5
4
3
6
7
Parts Diagram
ENGLISH 50007
# Part Number Description Qty
50007-01 Big Basket
1
50007-02 Hexagon Bolt M6X40
2
50007-03 Big Flat Washer Ø6
3
C90006-05 Nylon Locking Nut M6
4
50007-04 Small Basket
5
50007-05 Hexagon Bolt M6X65
6
C90006-02 Mounting Bracket
7
50007-06 Small Flat Washer Ø6
8
500 07-07 Support Bracket
9
50007-08
10
Hexagon Flange Head Tapping
Screw - ST5.5 x 16
1
4
16
12
1
8
8
8
2
2
3
WARRANTY
WARRANTY
CHAMPION POWER EQUIPMENT
1 YEAR LIMITED WARRANTY
Warranty Qualifications
Champion Power Equipment (CPE) will register this warranty upon
receipt of your Warranty Registration Card and a copy of your sales
receipt from one of CPE’s retail locations as proof of purchase.
Please submit your warranty registration and your proof of purchase
within ten (10) days of the date of purchase.
Repair/Replacement Warranty
CPE warrants to the original purchaser that the mechanical and
electrical components will be free of defects in material and
workmanship for a period of one year (parts and labor) from
the original date of purchase and 90 days (parts and labor) for
commercial and industrial use. Transportation charges on product
submitted for repair or replacement under this warranty are the sole
responsibility of the purchaser. This warranty only applies to the
original purchaser and is not transferable.
Do Not Return The Unit To The Place Of Purchase
Contact CPE’s Technical Service and CPE will troubleshoot any issue
via phone or e-mail. If the problem is not corrected by this method,
CPE will, at its option, authorize evaluation, repair or replacement
of the defective part or component at a CPE Service Center. CPE
will provide you with a case number for warranty service. Please
keep it for future reference. Repairs or replacements without prior
authorization, or at an unauthorized repair facility, will not be covered
by this warranty.
Warranty Exclusions
This warranty does not cover the following repairs and equipment:
Normal Wear
Products with mechanical and electrical components need periodic
parts and service to perform well. This warranty does not cover repair
when normal use has exhausted the life of a part or the equipment as a
whole.
Installation, Use and Maintenance
This warranty will not apply to parts and/or labor if the product is
deemed to have been misused, neglected, involved in an accident,
abused, loaded beyond the product’s limits, modified, installed
improperly or connected incorrectly to any electrical component.
Normal maintenance is not covered by this warranty and is not
required to be performed at a facility or by a person authorized by
CPE.
Other Exclusions
This warranty excludes:
– Cosmetic defects such as paint, decals, etc.
– Wear items such as filter elements, o-rings, etc.
– Accessory parts such as starting batteries, and storage covers.
– Failures due to acts of God and other force majeure events
beyond the manufacturer’s control.
– Problems caused by parts that are not original Champion Power
Equipment parts.
Limits of Implied Warranty and Consequential Damage
Champion Power Equipment disclaims any obligation to cover
any loss of time, use of this product, freight, or any incidental
or consequential claim by anyone from using this product. THIS
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
A unit provided as an exchange will be subject to the warranty of the
original unit. The length of the warranty governing the exchanged
unit will remain calculated by reference to the purchase date of the
original unit.
This warranty gives you certain legal rights which may change from
state to state or province to province. Your state or province may also
have other rights you may be entitled to that are not listed within this
warrant y.
Contact Information
Address
Champion Power Equipment, Inc.
Customer Service
12039 Smith Ave.
Santa Fe Springs, CA 90670 USA
www.championpowerequipment.com
Customer Service
Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
info@championpowerequipment.com
Fax no.: 1-562-236-9429
Technical Service
Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
tech@championpowerequipment.com
24/7 Tech Support: 1-562-204-1188
Loading...