OWNER’S MANUAL
INVERTER GENERATOR PARALLEL KIT
SAVE THESE INSTRUCTIONS
Important safety instructions
are included in this manual.
100301
MADE IN CHINA
REV 100301-20160413
MODEL NUMBER
12039 Smith Ave.
Santa Fe Springs CA 90670 USA
1-877-338-0999
www.championpowerequipment.com
Have questions or need assistance?
Do not return this product to the store!
WE ARE HERE TO HELP!
Visit our website:
www.championpowerequipment.com
for more info:
• Product Info & Updates
• Frequently Asked Questions
– or –
Call our Customer Care Team Toll-Free at:
• Tech Bulletins
• Product Registration
1-877-338-0999
Parts Ordering:
Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
*We are always working to improve our products. Therefore, the enclosed product may differ slightly from the image on the cover.
TAbLE Of CONTENTS
Introduction ............................ 1
Controls and Features ..................... 2
Power Panel .......................... 2
Operation and Parts ....................... 3
Paralleling two 2800W-3500W inverters ...... 3
Paralleling one 2800W-3500W inverter and one
2000W inverter ....................... 4
Specifications ........................... 5
Wiring Diagram ........................ 5
Parts Diagram ......................... 6
Parts List ............................ 6
100301
Inverter generator parallel kit
ENGLISH 100301
INTRODUCTION
Congratulations on your purchase of a Champion Power Equipment product. Champion Power Equipment and
Champion Engine Technology designs, builds, and supports all of our products to strict specifications and guidelines.
With proper product knowledge, safe use, and regular maintenance, this product should bring years of satisfying
service.
Every effort has been made to ensure the accuracy and completeness of the information in this manual, and we
reserve the right to change, alter and/or improve the product and this document at any time without prior notice.
Since CPE/CET highly value how our products are designed, manufactured, operated and are serviced, and also
highly value your safety and the safety of others, we would like you to take the time to review this product manual
and other product materials thoroughly and be fully aware and knowledgeable of the assembly, operation, dangers
and maintenance of the product before use. Fully familiarize yourself, and make sure others who plan on operating
the product fully familiarize themselves too, with the proper safety and operation procedures before each use. Please
always exercise common sense and always error on the side of caution when operating the product to ensure no
accidents, property damage, or injury occurs. We want you to continue to use and be satisfied with your CPE/CET
product for years to come.
Record the model and serial numbers as well as date and place of purchase for future reference. Have this
information available when ordering parts and when making technical or warranty inquiries.
1-877-338-0999
Model Number
100301
Serial Number
Date of Purchase
1
Purchase Location
100301 ENGLISH
Power Panel
CONTROLS AND fEATURES
1 4
(1) 120 Volt, 30 Amp Twist-Lock Receptacle –
(Nema L5-30R) This receptacle powers
120 Volt AC, 60 Hz, single phase loads.
(2) Circuit Breaker 30 Amp – Protects against
electrical overload.
(3) Circuit Breaker 50 Amp – Protects against
electrical overload.
(4) 120/240 Volt, 50 Amp Receptacle –
(14-50R) This receptacle powers
120/240 Volt AC, 60 Hz, single phase loads.
2 3
DANGER
Generators produces powerful voltage.
DO NOT touch bare wires or receptacles.
DO NOT use electrical cords that are worn,
damaged or frayed.
DO NOT operate generator in wet weather.
DO NOT allow children or unqualified persons to
operate or service the generator
Always inspect your parallel kit, outlets, wires, parts
prior to use.
DO NOT use if any part or wire is frayed, exposed,
or broken.
2
OPERATION
This kit is intended for the use with Champion Power
Equipment inverters with a least one inverter being
2800W-3500W, and with the ability to parallel. Please
refer to your inverter Owner’s Manual for safety rules,
start up, and shut down procedures, specifications, and
troubleshooting.
The total output of this kit will depend on the size of the
inverters connected to it. With no devices plugged into
the inverters themselves, the combined output can be
determined from the chart below.
Combined Inverter Parallel Output (Watts)*
ENGLISH 100301
Models Combined
100265 (1900)
100266 (2000)
10026 7-Du al Fu el
(2520-LPG/2800-Gasoline)
100269 (3100)
100270 (3200)
100271 ( 3100 )
100272 (3200)
* The maximum output of the 50A receptacle is 6000W and 30A receptacle is 3600W.
100265
(1900)
3500
3500 3500
4100 -LP G
4400-Gasoline
4700 4700
4700 4700
4700 4700
4700 4700
100266
(2000)
4100 -LP G
4400-Gasoline
WARNING
If not spaced apart, the exhaust heat from one unit
may discolor or melt the plastic on the other unit.
Paralleling two 2800W-3500W inverters
1. Inverters to be turned off and all electrical loads
disconnected before installing parallel kit.
2. Align the inverters in the same direction in a “V”
configuration at a minimum of 18 in. [45 cm] apart.
3. Clamp the parallel kit to the left handle of the
inverter on the left of the “V”.
4. On each inverter, remove the connector end cap and
insert the RED power lead into the RED receptacle
and the BLACK power lead into the BLACK
receptacle.
5. On each inverter, connect the grounding wire to the
grounding terminal on the inverter.
6. Start engine of both inverters according to inverter
Owner’s Manual. Observe the green output indicator
light on both inverter panels. The light will blink
during start up and will be solid when loads may be
3
connected.
10026 7-Du al Fu el
(2520-LPG/2800-Gasoline)
4800-LPG
5300-Gasoline
5300-LPG
5500-Gasoline
5300-LPG
5500-Gasoline
5300-LPG
5500-Gasoline
5300-LPG
5500-Gasoline
Paralleling two 2800W-3500W inverters Cont’d.
7. Connect devices to parallel or inverter panels up to
the receptacles rated amperage. Never exceed the
specified capacity of the receptacle.
8. Follow the instructions in the inverter Owner’s
Manual for turning off the inverter.
100269
(310 0)
5800
5800 5800
5800 5800 5800
5800 5800 5800 5800
100270
(3200)
100271
(310 0)
100272
(3200)
100301 ENGLISH
Paralleling one 2800W-3500W inverter
and one 2000W inverter
1. Inverters to be turned off and all electrical loads
disconnected before installing parallel kit.
2. Align the inverters in the same direction in a “V”
configuration at a minimum of 18 in. [45 cm] apart.
3. Clamp the parallel kit to the left handle of the
inverter on the left of the “V”.
4. Connect the 2800W-3500W inverter.
5. Connect the 2000W inverter by removing the
adapter connectors from the back of the parallel kit.
Remove the connector end cap and insert the RED
power lead into the RED adapter connector and
then into the RED receptacle and the BLACK power
lead into the BLACK adapter connector and then
into the BLACK receptacle.
6. Start engine of both inverters according to inverter
Owner’s Manual. Observe the green output indicator
light on both inverter panels. The light will blink
during start up and will be solid when loads may be
connected.
7. Connect electrical loads to parallel or inverter
panels up to the receptacles rated amperage. Never
exceed the specified capacity of the receptacle.
8. Follow the instructions in the inverter Owner’s
Manual for turning off the inverter.
OPERATION
4
SPECIfICATIONS
GREEN YELLOW
Wiring Diagram
ENGLISH 100301
W
G/Y
R
R
G/Y
G/Y
W
R
14-50R
R
30A
R
50A
R
G/Y
R W
R
5
L5-30R
G/Y
W
W
G/Y
WHITE
W
R RED
G/Y
100301 ENGLISH
Parts Diagram
SPECIfICATIONS
14
2
15
1
3
4
Parts List
5
56
7
13
4
3
8
9
10
11
12
# Part Number Description Qty
81.210003.00 Plug, Wire 2
1
83.213001.00 Control Box 1
2
83.210006.00.3
3
83.210006.01.1
4
1.9074.4.0414.1 Screw/Washer Assembly M4×14 8
5
1.6177.1.04 .1 Lock Nut M4, Flange 4
6
5.11 20 .02 3 Receptacle L5-30R, CSA 1
7
5.12 20 .930
8
1.9074.4.0306.1 Screw/Washer Assembly M3× 6 4
9
5.12 20 .950
10
Plug, Parallel, Wire 280 mm,
Red
Plug, Parallel, Wire 250 mm,
Black
30Amp Circuit Breaker, Flip
Lever, CSA
50Amp Circuit Breaker, Flip
Lever, CSA
# Part Number Description Qty
5.11 20 .03 9 Receptacle 14-50R, CSA 1
11
83 .213100.0 0 Control Panel 1
12
83.213004.00 Rubber Insert 1
2
2
1
1
13
9.170 0.00 2.1 Adaptor Plug, Parallel, Black 1
14
9.1700.002.3 Adaptor Plug, Parallel, Red 1
15
6
WARRANTY
WARRANTY
CHAMPION POWER EQUIPMENT
1 YEAR LIMITED WARRANTY
Warranty Qualifications
Champion Power Equipment (CPE) will register this warranty upon
receipt of your Warranty Registration Card and a copy of your sales
receipt from one of CPE’s retail locations as proof of purchase.
Please submit your warranty registration and your proof of purchase
within ten (10) days of the date of purchase.
Repair/Replacement Warranty
CPE warrants to the original purchaser that the mechanical and
electrical components will be free of defects in material and
workmanship for a period of one year (parts and labor) from
the original date of purchase and 90 days (parts and labor) for
commercial and industrial use. Transportation charges on product
submitted for repair or replacement under this warranty are the sole
responsibility of the purchaser. This warranty only applies to the
original purchaser and is not transferable.
Do Not Return The Unit To The Place Of Purchase
Contact CPE’s Technical Service and CPE will troubleshoot any issue
via phone or e-mail. If the problem is not corrected by this method,
CPE will, at its option, authorize evaluation, repair or replacement
of the defective part or component at a CPE Service Center. CPE
will provide you with a case number for warranty service. Please
keep it for future reference. Repairs or replacements without prior
authorization, or at an unauthorized repair facility, will not be covered
by this warranty.
Warranty Exclusions
This warranty does not cover the following repairs and equipment:
Normal Wear
Products with mechanical and electrical components need periodic
parts and service to perform well. This warranty does not cover repair
when normal use has exhausted the life of a part or the equipment as a
whole.
Installation, Use and Maintenance
This warranty will not apply to parts and/or labor if the product is
deemed to have been misused, neglected, involved in an accident,
abused, loaded beyond the product’s limits, modified, installed
improperly or connected incorrectly to any electrical component.
Normal maintenance is not covered by this warranty and is not
required to be performed at a facility or by a person authorized by
CPE.
Other Exclusions
This warranty excludes:
– Cosmetic defects such as paint, decals, etc.
– Wear items such as filter elements, o-rings, etc.
– Accessory parts such as starting batteries, and storage covers.
– Failures due to acts of God and other force majeure events
beyond the manufacturer’s control.
– Problems caused by parts that are not original Champion Power
Equipment parts.
Limits of Implied Warranty and Consequential Damage
Champion Power Equipment disclaims any obligation to cover
any loss of time, use of this product, freight, or any incidental
or consequential claim by anyone from using this product. THIS
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
A unit provided as an exchange will be subject to the warranty of the
original unit. The length of the warranty governing the exchanged
unit will remain calculated by reference to the purchase date of the
original unit.
This warranty gives you certain legal rights which may change from
state to state or province to province. Your state or province may also
have other rights you may be entitled to that are not listed within this
warrant y.
Contact Information
Address
Champion Power Equipment, Inc.
Customer Service
12039 Smith Ave.
Santa Fe Springs, CA 90670 USA
www.championpowerequipment.com
Customer Service
Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
info@championpowerequipment.com
Fax no.: 1-562-236-9429
Technical Service
Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
tech@championpowerequipment.com
24/7 Tech Support: 1-562-204-1188
Loading...