Champion Industries SD-20 Specification Sheet

Project
Item No.
Quantity

MODEL SD-20 WASHER

STANDARD FEATURES

• Heavy-duty stainless steel construction

• Front-loading, split door design

• External rinse hose and spray gun

• Self-contained water heater

• Moisture resistant control gauges

• Recirculating wash water

• Adjustable wash and rinse cycles

• Easy to remove filter screens

• Digital control and information system

• Fresh water sanitizing rinse

• Versatile racking system

• User friendly, push-button operation

MODEL SD-20

Pot, Pan and

Utensil Washer

OPTIONS

Tank Heat

Steam

Gas

Additional Lift Door and Split Door Models:

SD-10 LD-20

(2M) 4/14 Printed in U.S.A.

DG008

SD-36

Champion Industries, Inc.

3765 Champion Blvd., Winston-Salem, NC 27105

Tel: [phone] Fax: [phone]

2674 N. Service Road,

Jordan Station, Ontario, Canada L0R 1S0

Tel: [phone] Fax: [phone]

www.championindustries.com

MODEL SD-20

50"

14" 36"

Hot Water

Connection

6" Dia. Vent

Wash Down

Hose With

Spray Nozzle

Rinse Tank

Drain Valve

Adjustable Legs

Pot, Pan and
Utensil Washer

Dimensions shown in inches

MODEL SD-20 WASHER

87-5/8"

83"

71-1/8"

Adjustable Legs

28-1/2"

Door

Opening

35-1/2"

Lift

Height

Hot Water

Connection

6" Dia. Vent

Wash Down

Hose With

Spray Nozzle

Rinse Tank

Drain Valve

Opening

14" 36"

50"

40"

Door

50"

51-1/2"

Digital Control and
Information Center

Rinse Thermometer
Wash Pressure Gauge
Wash Thermometer

Wash Pump

Overow
Connection

Electrical
Control
Panel

SPECIFICATIONS

Door

Stainless steel split door design. The top

half rises while the lower half folds down
to provide a space saving drain table.

Spray Arm Assembly

Stainless steel spray arm assemblies, with

stainless steel jets and quick-release
mechanism for easy cleaning and reassembly.

Filter

Perforated, removable, stainless steel

baskets.

Water Pump

7-1/2 Hp, 208/240 or 440/480 volt, 1 phase or

3 phase, 60 cycle with output of 120 gallons
per minute at 35 to 45 P.S.I.

Digital Control & Information Center

110 volt control circuit with push pad

operation of “power on,” “stop” and
“short, medium or long wash cycles.” A
digital display indicates “time remaining”
for each cycle. LED’s indicate wash, rinse
and unload functions. A buzzer is also
included to provide an audible indication
of time to unload. Pre-programmed circuit
board allows the push pad to be used as
a “diagnostic center” by displaying “error
codes” for ease of troubleshooting.

Gauges

Special moisture resistant design, measures

wash temperature, wash pressure and rinse
temperature.

Wash Tank

Stainless steel with electric infrared, gas,

steam or steam coil natural imersion heaters,
thermostatically controlled, low-water
protected, sloped to drain with a 36-gallon
capacity (27 gallons if infrared gas heated)

Rinse Tank

Stainless steel with electric imersion heater

(infrared gas or steam coil option). Uses 5.6
gallons per 30-second cycle.

Racks

Stainless steel rod, built to match specific

washing requirements.

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]

SPECIFICATIONS

MODEL SD-20 POT, PAN &

UTENSIL WASHER

Washer Automatic washing machine designed to wash all pots, pans and utensils commonly used

in baking and cooking operations.

Cabinet 50" wide x 36" deep x 71-1/8" high. Overall height with door open: 86-1/8". Door opening:

40" wide x 28-1/2" high. Constructed of 16 gauge, type 300 #3 finish, stainless steel. All
seams continuously welded, cleaned and polished.

Door Front-loading, split door design for easy loading and unloading. The top half of the door

system rises while the lower half folds down to create a space saving drain table. Door
is interlocked with limit switch to prevent machine operation while door is open. Door
construction: 14 and 18 gauge, type 300 #3 finish, stainless steel.

Recirculating Wash Tank Heated by 12kW electric immersion heaters, thermostatically controlled and low water

protection system. 36 gallons (27 gallons if infrared heated), 14 gauge stainless steel,
sloped to drain. Infrared gas and steam heating options available.

Wash Tank Filter Perforated, stainless steel basket type, double filter system for increased effectiveness and

easy cleaning without emptying wash tank.

Wash Tank Fill Valve Size 1-1/4" NPT, automatic.

Wash Tank Drain Valve Size 1-1/4" NPT, gate drain.

Wash Pump 7-1/2 hp, 208/240, 480 or optional 575 volt, 3 phase, 60 cycle.

Close coupled; 120 gallons per minute at 35 to 45 psi.

Spray Arm Assemblies Water driven, stainless steel spray arm assemblies, with stainless steel jets and

quick-release mechanism for easy cleaning and reassembly.

Sanitizing Rinse Tank Stainless steel, 10 gallon capacity, with 12kW imersion electric heater. Uses 5.6 gallons per

30 second cycle. Infrared gas and steam coil heating options available.

Final Rinse Piping Type 300 stainless steel tubing with brass compression fittings and cone rinse jets.

Control & Information Center 120 volt control circuit with push pad operation of “Power On,” “Stop” and “Short, Medium

or Long Wash Cycles.” A digital display indicates “Time Remaining” for each cycle. LED’s
indicated wash, rinse and unload functions. A buzzer is also included to provide an audible
indication when the machine is ready to unload. A pre-programmed circuit board allows
the push pad to be used as a “Diagnostic Center” by displaying “Error Codes” for ease of
troubleshooting. Moisture resistant gauges measure Wash Temperature, Wash Pressure
and Rinse Temperature.

External Rinse Hose Externally mounted rinse hose with spray gun for easy cleaning and maintenance

of machine.

Steam Exhaust Vent Steam exhaust vent 6-3/4" I.D., consisting of 16 gauge rolled collar for PVC pipe

connection bolted to the top of the machine. Machine pre-wired with control timer
for the addition of a fan.

Optional Exhaust Fan Draft inducer fan side mounted on exhaust duct to extract excess steam after final rinse

cycle. 300 CFM @ .05" static pressure. 1/10 Hp, 110 volt motor, 1550 RPM.

Racks Customized to hold your specific items. Standard bakery racks include utensil basket with

(2) hold-down lids and (2) bun/sheet pans insert designed to hold (10) pans, constructed
of stainless steel rod, mig-welded.

2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: [phone] Fax: [phone]

(2M) 4/14 Printed in U.S.A.

Champion Industries, Inc.

3765 Chammpion Blvd., Winston-Salem, NC 27105

Tel: [phone] Fax: [phone]

www.championindustries.com

SPECIFICATIONS

MODEL SD-20 POT, PAN &

UTENSIL WASHER

Connections Water Inlet: 120°F, 3/4" NPT

Water Drain and Overflow: 1-1/4" NPT
Electrical: Two point connection (except 575 volt)
Steam Heating Option: 1/2" NPT

Weight Crated: 1,100 lbs. Uncrated: 850 lbs.

NOTE: All weights are approximate. Weights will vary depending on the number of
options included with the machine.

Services 120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:

Running Amps

1

Infrared Gas

2

Wash

Infrared

Gas Booster

Elec. Spec.

Electric Wash

Electric

Booster

Steam Wash

Steam

Booster

208 Volt 3 phase 86 19 19

240 Volt 3 phase 79

480 Volt 3 phase 40

1

Steam Supply: Consumption: 95 lbs./hr. @ 15 psi minimum

2

Gas Supply: Consumption: 90,000 BTU/hr. @ 1/2 lb. pressure maximum

18 18

9 9

Certifications UL and UL Sanitation Listed (all). CUL Listed (electric and steam only).

2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: [phone] Fax: [phone]

Champion Industries, Inc.

3765 Chammpion Blvd., Winston-Salem, NC 27105

Tel: [phone] Fax: [phone]

www.championindustries.com