Champion Industries LD-20-PT Specification Sheet
Project
Item No.
Quantity
MODEL LD-20-PT WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• Pass-thru operation
• Heavy-duty 15 Hp pump
• Recirculating wash water
• High velocity, stainless steel “V” jets
• Wash/rinse cycle of just 5 minutes
• Electric, gas or steam heat
• External rinse hose and spray gun
• Recirculating wash water
• Moisture resistant control gauges
• Digital Control & Information Center
• Self containing water heating
• Fresh water sanitizing rinse
• Removable, dual filtration system
• One-year parts and labor warranty
MODEL LD-20-PT
Pot, Pan and
Utensil Washer
Photo is for general visual
representation only. Please
refer to specifications for
the latest detailed product
information.
OPTIONS
Tank Heat
Steam
Gas
Additional Lift Door and Split Door Models:
LD-12-PT LD-20 SD-20 SD36
(1M) 11/14 Printed in U.S.A.
DG009
SPECIFIER STATEMENT
Specified unit will be Champion Industries model LD-20
pot, pan and utensil washer.
Features include lift door design, 15 Hp pump motor, 20
pan capacity, push button control and information center,
recirculating wash water and 27 second wash/rinse cycle.
1 year parts and labor warranty.
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
www.championindustries.com
LD-20-PT
28"
Door Opening
28-1/2"
Door
Opening
76-1/2"
81-1/2"
99"
34"
Lift
Height
36-1/4"
Wash Down
Hose with
Spray Nozzle
Hot Water
Connection
Wash Pump
Rinse Tank
Adjustable Legs
Pot, Pan and
Utensil Washer
Dimensions shown in inches
LD-20-PT WASHER
Hot Water
Connection
Wash Down
Hose with
Spray Nozzle
Wash Pump
Rinse Tank
Adjustable Legs
Access
Panel
66"
73"
28"
Door Opening
36-1/4"
12" Dia. Vent
Wash Thermometer
Pressure Gauge
Rinse Thermometer
Digital Control and
Information Center
Electrical
Control Panel
Overow
Connection
Drain Valve
28-1/2"
Door
Opening
34"
Lift
Height
81-1/2"
76-1/2"
99"
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge stainless steel. All seams
tig welded, cleaned and polished.
Door
Stainless steel, counter-balanced with self-
lubricating guides. Stainless steel cables on
nylon rollers with guards to insure tracking.
Spray Arm Assembly
Water driven, stainless steel spray arm
assembly with stainless steel jets, removable
end caps and hand operated quick release
mechanism for easy cleaning and reassembly.
Mounted on stainless steel base.
Filter
Perforated, removable, stainless steel baskets.
Water Pump
15 Hp, 208/240 or 480 volt, 3 phase, 60 cycle
with output of 250 gallons per minute at 35
to 45 P.S.I.
Digital Control & Information Center
120 volt control circuit with push pad
operation of “Power On”, “Stop” and “Short,
Medium or Long Wash Cycles”. A digital
display indicates “Time Remaining” for each
cycle. LED’s indicate wash, rinse and unload
functions. A buzzer is also included to provide
an audible indication of time to unload.
A pre-programmed circuit board allows
the push pad to be used as a “Diagnostic
Center” by displaying “Error Codes” for ease
of troubleshooting.
Gauges
Wash temperature, rinse temperature, wash
pressure. Special moisture resistant design.
Wash Tank
Stainless steel with electric, infrared gas
or steam coil heating. Thermostatically
controlled, low water protected, sloped to
drain 50 gallon capacity.
Booster Heater
Electric, infrared gas or steam coil heating
208/240 or 480 volt to provide 180°F/190°F
hot sanitizing rinse.
Racks
Stainless steel rod, built to match
specific washing requirements.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Loading...