Page 1
Project
Item No.
Quantity
LD-12-PT WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• External rinse hose and spray gun
• Self-contained water heating
• Moisture resistant control gauges
• Recirculating wash water
• Adjustable wash and rinse cycles
• Removable dual filtration system
• Electric, steam or infrared gas water heating
• Precision engineered spray patterns
• Digital Control & Information Center
• One-year parts and labor warranty
LD-12-PT
Pot, Pan and
Utensil Washer
OPTIONS
Tank Heat
Steam
Gas
Additional Lift Door and Split Door Models:
LD-20-PTLD-10 LD-12-CPT LD20
7/14 (1M)
DG005
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
www.championindustries.com
Page 2
LD-12-PT
75"
38-1/4"
99"
81-1/2"
76-1/2"
Wash Pump
28-1/2"
Door
Opening
28"
Door
Opening
34"
Lift
Height
Hot Water
Connection
Wash Down
Hose With
Spray Nozzle
Rinse Tank
Pot, Pan and
Utensil Washer
Dimensions shown in inches
LD-12-PT WASHER
Hot Water
Connection
Wash Down
Hose With
Spray Nozzle
Rinse Tank
Wash Pump
75"
39"
45-1/2"
Door
Opening
38-1/4"
28"
6" Dia. Vent
Wash Thermometer
Pressure Gauge
Rinse Thermometer
Digital Control and
Information Center
Electrical Control
Panel
Overow
Connection
Adjustable Legs
Drain Valve
28-1/2"
Door
Opening
34"
Lift
Height
81-1/2"
76-1/2"
99"
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge Stainless steel. All seams
Heliarc welded.
Door
Stainless Steel, counter-balanced with
self-lubricating guides. Stainless steel cables
on nylon rollers with guards to prevent
jumping.
Filter
Perforated, removable, Stainless Steel
screens.
Water Pump
7-1/2 Hp., 208/240 or 440/480 volt, 1 phase or
3 phase, 60 cycle with output of 120 gallons
per minute at 35 to 45 P.S.I.
Digital Control & Information Center
120 volt control circuit with push pad
operation of “Power On”, “Stop” and
“Short, Medium or Long Wash Cycles”.
A digital display indicates “Time
Remaining” for each cycle. LED’s indicate
wash, rinse and unload functions. A buzzer
is also included to provide an audible
indication of time to unload. A preprogrammed circuit board allows the push
pad to be used as a “Diagnostic Center”
by displaying “Error Codes” for ease of
troubleshooting.
Gauges
Wash temperature, rinse temperature,
wash jet pressure. Special moisture
resistant design.
Wash Tank
Stainless Steel with electric, infrared gas,
steam or steam coil heating. Thermostatically
controlled, low water protected, sloped
to drain 20 gallon capacity.
Rinse Tank
Stainless Steel with electric, infrared gas or
steam coil heating to provide 180°F/190°F
hot sanitizing rinse.
Racks
Stainless Steel rod, built to match specific
washing requirements.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Page 3
SPECIFICATIONS
LD-12-PT POT, PAN &
UTENSIL WASHER
Washer
Cabinet
Door
Recirculating Wash Tank
Wash Tank Filter
Wash Tank Fill Valve
Wash Tank Drain Valve
Wash Pump
Rotating Wash Hub and
Spray Arm Assembly
Sanitizing Rinse Tank
Water Supply Valve
Final Rinse Piping
Control & Information Center
External Rinse Spray Hose
Steam Exhaust Vent
Optional Exhaust Fan
Automatic washing machine designed to wash all pots, pans and utensils commonly used in
baking and cooking operations. Machine is pass-thru type with tabling on each end.
39" wide x 38-1/4" deep x 76-1/2" high. Overall height with door open: 99". Door opening:
28" wide x 28-1/2" high. Constructed of 12, 14 & 16 gauge, type 304 #3 finish, stainless steel.
All seams tig-welded, cleaned and polished.
Lift-up door type. Two doors, single control handle. Counter balanced with self-lubricating guides,
stainless steel cables on nylon rollers with cable guards to ensure tracking. Doors are interlocked
with limit switch to prevent machine operation while doors are open. Door construction:
16 gauge, type 304 #3 finish, stainless steel.
Heated by 12 kW total 208/240 at 480 volt electric immersion heater, thermostatically controlled
wash temperature and low water protection system. 20 gallons, 14 gauge stainless steel, sloped
to drain. Infrared gas and steam coil heating options available.
Perforated, stainless steel basket type, double filter system for increased effectiveness and easy
cleaning without emptying wash tank.
Size 1/2" brass material, solenoid type, automatic.
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for automatic option.
7-1/2 Hp, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 120 gallons per minute at 35 to
45 psi, mounted on 12 gauge stainless steel formed channel base.
Water driven, stainless steel spray arm assembly with stainless steel jets, removable end caps and
hand-operated, quick-release mechanism for easy cleaning and reassembly. Mounted on stainless
steel base.
Stainless steel, 6 gallon capacity, with one 6 kW 208/240 or 480 volt electric booster heater to
provide 180°/190° F hot sanitizing rinse. Uses 2.8 gallons per 22 second cycle. Infrared gas and
steam coil heating options available.
Size 1/2" brass material, solenoid type, automatic.
Type 304 stainless steel tubing with brass compression fittings and brass or optional stainless steel
full cone rinse jets.
110 volt control circuit with push pad operation of “Power On,” “Stop” and “Short, Medium or
Long Wash Cycles.” A digital display indicates “Time Remaining” for each cycle. LED’s indicate
wash, rinse and unload functions. A buzzer is also included to provide an audible indication of
time to unload. A pre-programmed circuit board allows the push pad to be used as a “Diagnostic
Center” by displaying “Error Codes” for ease of troubleshooting. Moisture resistant gauges
measure Wash Temperature, Wash Pressure and Rinse Temperature.
Externally mounted rinse hose with spray gun for easy cleaning and maintenance of machine.
Steam exhaust vent 6-3/4" diameter, consisting of 16 gauge rolled collar for PVC pipe connection
bolted to the top of the machine. Machine pre-wired with control timer for the addition of a fan.
Draft inducer fan side mounted on exhaust duct to extract excess steam after final rinse cycle.
300 CFM @ .05" static pressure.1/10 Hp, 110 volt motor, 1550 RPM.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
7/14 (PDF)
Champion Industries, Inc.
3765 Chammpion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Page 4
SPECIFICATIONS
LD-12-PT POT, PAN &
UTENSIL WASHER
Racks
Connections
Services
Customized to hold your specific items. Standard bakery racks include utensil basket with
hold-down lid and bun/sheet pan insert designed to hold ten pans, constructed of stainless
steel rod, mig-welded.
Water Inlet: 120°F, 3/4" NPT
Water Drain and Overflow: 1-1/4" NPT
Electrical: Two point connection through knock out on electrical enclosure.
Steam Heating Option: 1/2" NPT
Natural or Propane Gas Heating Option: 1/2" NPT
120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:
Running Amps
1
Electric Wash
Elec. Spec.
208 Volt
3 phase
240 Volt
3 phase
480 Volt
3 phase
1
Steam Supply: Consumption: 63 lbs./hr. @ 15 psi minimum
2
Gas Supply: Consumption: 60,000 BTU/hr.
Electric Booster
69 19 19
63 18 18
32 9 9
Steam Wash
Steam Booster
Infrared Gas Wash
Infrared Gas Booster
2
Certifications
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
UL and UL Sanitation Listed (all). CUL Listed (electric and steam only).
Champion Industries, Inc.
3765 Chammpion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Loading...