Champion Industries LD-10 Specification Sheet
Project
Item No.
Quantity
LD-10 WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• Space saving, easy action lift door
• External pre-rinse and wash down hose
• Self-contained water heating
• Moisture resistant control gauges
• Recirculating wash water
• Quick release, ball bearing hub assembly
• Adjustable wash and rinse cycles
• Easy to remove filter basket
• Digital Control & Information Center
• Adjustable racking system
• Electric tank heat
• One year parts and labor warranty
LD-10
Pot, Pan and
Utensil Washer
OPTIONS
Tank Heat
Steam
Gas
Additional Lift Door and Split Door Models:
LD-20UTM-10 SD-10 SD-20
DG003
(1M) 7/14 Printed in U.S.A.
SPECIFIER STATEMENT
Specified unit will be Champion Industries model LD-10
pot, pan and utensil washer.
Features include lift door design, heavy duty 5 Hp pump,
compact 30" width,10 pan capacity, push button control
and information center, stainless steel V jets, 5 minute
wash/rinse cycle and recirculating wash water.
1 year parts and labor warranty.
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
www.championindustries.com
LD-10
34"
Hot Water
Connection
6" Dia. Vent
Wash Down Hose
With Spray Nozzle
Overflow
Connection
Rinse Tank
Drain Valve
Adjustable Legs
Pot, Pan and
Utensil Washer
Dimensions shown in inches
LD-10 WASHER
101"
86-1/2"
75"
Hot Water
Connection
6" Dia. Vent
Wash Down Hose
With Spray Nozzle
Overflow
Connection
Rinse Tank
Drain Valve
Adjustable Legs
28-1/8"
Door
Opening
36-1/4"
Lift
Height
24-1/2"
Door
Opening
30"
31-1/2"
Digital Control and
Information Center
Rinse Thermometer
Wash Pressure Gauge
Wash Thermometer
Electrical
Control
Panel
Wash
Pump
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge Stainless steel. All seams
tig welded.
Door
Stainless steel lift door, counter-balanced with
self-lubricating guides. Stainless steel cables
on nylon rollers with guards to prevent jumping.
Rotating Wash, Hub & Spray Arm Assembly
Water driven, stainless steel spray arm assembly
with stainless steel jets, removable end caps and
hand operated quick release mechanism for
easy cleaning and reassembly. Mounted on
stainless steel base.
Filter
Perforated, removable, stainless steel basket.
Water Pump
5 Hp, 208/240 or 440/480 volt, 1 phase or 3
phase, 60 cycle with output of 100 gallons per
minute at 35 to 45 P.S.I.
Digital Control & Information Center
110 volt control circuit with push pad operation of
“Power On”, “Stop” and “Short, Medium, or Long
Wash Cycles”. A digital display indicates “Time
Remaining” for each cycle. LED’s indicate wash,
rinse and unload functions. A buzzer is also
included to provide an audible indication of
time to unload. A pre-programmed circuit board
allows the push pad to be used as a “Diagnostic
Center” by displaying “Error Codes” for ease of
troubleshooting.
Gauges
Special moisture resistant design. Wash
temperature, rinse temperature, wash jet pressure.
Wash Tank
Stainless steel with electric, gas, steam or steam
coil heating, thermostatically controlled, low
water protected, sloped to drain with a
21-gallon capacity.
Rinse Tank
Stainless steel with electric or steam coil booster
heater to provide 180°F/190°F hot sanitizing
rinse. Uses 2.8 gallons per 22 second cycle.
Racks
Stainless Steel rod, built to match specific
washing requirements.
34"
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
2674 N. Service Road
Jordan Station, Ontario, Canada L0R 1S0
•
800/263-5798
•
Fax: 905/562-4618
•
Loading...