Champion Industries DH5000 Specification Sheet

Project Item No. Quantity

GENESIS HOOD-TYPE

STANDARD FEATURES

• ENERGY STAR® Qualified

• NEW Exclusive Built-in booster configured

for both 40° and 70° Rise

• Rinse Sentry – ensures 180°F final rinse

• Auto start – starts unit when hood is closed

• High efficiency 1 HP pump

• Up to 53 racks per hour

• Self draining pump

• Automatic tank fill

• Detergent/chemical connections

• Interchangeable upper and lower spray arm

• Automatic drain valve – drains wash tank when power is off

• Vent fan control

• Bottom mounted digital controls

• PRV (Pressure Reducing Valve)

• Sloped hood keeps hot vapors away from operator

• Standard and Heavy Duty wash cycles

Gas

Genesis

DH5000 Single Source Gas

Hood-type Dishwashing Machine

OPTIONS & ACCESSORIES

: Drain Water Tempering Kit

: Direct Vent Option with Fan

: Racks

: Peg

: Flat

: Door Interlock

: Corner Operation Splash Baffle

(1M) 12/14 Printed in U.S.A.

Photo is for general visual representation only. Please refer to specifications for the latest detailed product information.

SPECIFIER STATEMENT

Specified unit will be Champion model Genesis, DH5000 single source gas hood-type dishwashing machine.

Features sloped hood, electronic controls, Rinse Sentry, Auto start, interchangeable stainless steel wash and rinse arms, up to 53 racks/hr., 0.83 US gals/rack.

1 year parts and labor warranty.

Champion Industries, Inc.

3765 Champion Blvd., Winston-Salem, NC 27105

Tel: 336/661-1556 Fax: 336/661-1979

www.championindustries.com

GENESIS

25-5/16

25-5/8

27-1/2

34-1/8

5-3/4

44-5/8

6-3/8

24-5/8

20-3/4

8-1/4

Gas Booster

25-5/16

25-5/8

27-1/2

34-1/8

5-3/4

44-5/8

6-3/8

24-5/8

20-3/4

8-1/4

3-1/4

Gas Booster

DH5000 Single Source Gas

Hood-type Dishwashing Machine

Shipping weight crated: 300 lbs.

GENESIS HOOD-TYPE

25-5/8

Utilities

1 Electrical

Machine Connection (See Electrical Box) Gas Booster Connection 15 AMPs 120V/60/1

2 Hot Water

3/4" NPT Hot Water 140°F for 40°F Rise 3/4" NPT Hot Water 110°F for 70°F Rise 20-22 PSI Flow pressure

3 Drain

2" OD Machine Drain Connection 3/4" NPT Relief Valve to Open Drain 1/2" NPT Vent to Open Drain

4 Natural Gas

40°F Rise Requires 58,000BTU/hr 70°F Rise Requires 105,000BTU/hr PMG-60 Requires 1/2" NPT PMG-100 Requires 3/4" NPT See Gas Piping Note

5 Gas Flue Exhaust

See Gas Flue Ventilation Note 4" Diameter Rear of Booster

6 Exhaust

250 CFM Hood Required

10-1/2

Gas Booster

24-5/8

8-1/4

20-3/4

3-1/4

10-1/2

69-3/4

6-3/8

5-3/4

27-1/2

44-5/8

31-3/8

25-7/16

19-5/8

10-1/4

Plan View

Warning: Plumbing, electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary and safety codes and the National Electrical Code.

Minimum

Voltage

Rated Amps

Ampacity

208-240/60/1 15 20 20

208-240/60/3 8 15 15

460-480/60/3 4 15 15

8-1/2

Supply

Circuit

Gas Booster

34-1/8

7-1/8

Front ViewSide View

Maximum

Overcurrent

Protective

Device

Dimensions shown in inches and [mm]

3-1/2

29-1/2

19-5/8

26-1/8

60-1/8

Typical Table Construction

SPECIFICATIONS

Capacities

Racks per hr. (NSF rated) 53 Wash tank (gal.) 9.5

Motor horsepower Water consumption

Gal. per hr. (max. use) 44 Gal. per rack 0.83

Temperature °F

Wash 150 Rinse 180

Gas Heating

PMG-60 (40°F rise) 58,000 BTU/hr PMG-100 (70°F rise) 105,000 BTU/hr

Time cycle in seconds

Standard Extended

Wash 35 65 Rinse 10 10 Sanitary Dwell 15 15 Total cycle 60 90

1 HP

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com

‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.