
Project 
Item No. 
Quantity
VERSACLEAN DOORTYPE
STANDARD FEATURES
• ENERGY STAR® Qualified
• NEW Exclusive Built-in booster configured 
for both 40° and 70° Rise
• NEW Exclusive Field convertible to single or 
three phase, 208 or 240 volt, corner or straight 
through operation
• Rinse Sentry – ensures 180°F final rinse
• Auto start – starts unit when doors are closed
• High temperature 
• Single point connection
• High efficiency 1 HP pump
• 55 racks per hour
• Self draining pump
• Automatic tank fill 
• Detergent/chemical connections
• Interchangeable upper and lower arm
• Top mounted splash proof controls
• Automatic drain valve
• Vent fan control
• Pressure regulating valve
• Low water tank heat protection
VERSACLEAN
 DH2000 High Temperature 
Door-type 
Dishwashing Machine
OPTIONS & ACCESSORIES
  Drain Tempering Kit
  Side Panels
(1M) 12/10  Printed in U.S.A.
SPECIFIER STATEMENT
Specified unit will be Champion model Versa-Clean,  
DH2000 high temperature door-type dishwashing machine.
Features top mounted splash proof controls, Rinse Sentry, 
Auto start, interchangeable stainless steel wash and rinse 
arms, 55 racks/hr., .90 US gals/rack. 
1 year parts and labor warranty.
Champion Industries, Inc. 
3765 Champion Blvd, Winston-Salem, NC 27105 
Tel: 336/661-1556  Fax: 336/661-1979 
  www.championindustries.com

VERSACLEAN
Typical Table Construction
Typical Table Construction
63-3/4" 
57-1/4" 
38" 
33-3/4" 
4-1/2" 
19-3/4" 
2-1/2" 
6" Min
6" [152]Min
6" Min
7-1/4" 
7-7/8" 
25-3/8" 
25-3/8" 
31-7/8" 
28-3/8" 
30"
1-1/2" Roll
1-1/8"
7-1/4"
21-3/8"
Front view
Top View
1
2
2
3
3
Typical Table Construction
63-3/4" 
57-1/4" 
38" 
33-3/4" 
4-1/2" 
19-3/4" 
2-1/2" 
6" Min
7-1/4" 
7-7/8" 
31-7/8" 
28-3/8" 
7-1/4"
21-3/8"
3
Typical Table Construction
63-3/4" 
6" Min
7-1/4" 
7-7/8" 
31-7/8" 
28-3/8" 
1-1/2" Roll
7-1/4"
21-3/8"
Typical Table Construction
6" Min
31-7/8" 
28-3/8" 
30"
1-1/2" Roll
1-1/8"
7-1/4"
21-3/8"
DH2000 High Temperature 
Door-type  
Dishwashing Machine
Shipping weight crated: 300 lbs. 
VERSACLEAN DOORTYPE
59-1/8" 
2
1
3
6-5/8" 
12-7/8" 
3
3
18-3/4" 
2
6" Min
7-7/8" 
25-3/8" 
Corner Configuration
2
3
31-7/8" 
Straight Through
Utilities 
1 Water
3/4" NPT Flow pressure 20-25 PSI  
Hot water 140°F (82°C) 
2 Electrical 40°/70° Booster
A. 208-220/60/1 (See Box) 
B. 208-220/60/3 (See Box)
3 Drain 
A. 2" OD Connection 
Gravity flow, 15 GRM max flow
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
6" [152]Min
25-3/8" 
6" Min
7-1/4" 
28-3/8" 
2
2-1/2" 
4-1/2" 
1
33-3/4" 
19-3/4" 
3
Front View Door ClearanceSide View
30"
1-1/2" Roll
21-3/8"
1-1/8"
Typical Table Construction
 Electric 40°/70° Rise Booster 
       Minimum  Maximum 
       Supply Ckt. Overcurrent 
     Rated Conductor  Protective 
 Voltage Amps Ampacity  Device
 208/60/1 65  80  80 
 240/60/1 75  80  80 
 208/60/3 40  50  50 
 240/60/3 45  50  50
Warning: Plumbing, electrical connections should be 
made by qualified personnel who will observe all the 
applicable plumbing, sanitary and safety codes and the 
National Electrical Code.
38" 
57-1/4" 
7-1/4"
Dimensions shown in inches
17-5/8" 
20-5/8" 
76" 
54-1/8" 
SPECIFICATIONS
Capacities
  Racks per hr. (NSF rated)  55 
  Wash tank (gal.)  9.5
Motor horsepower 
Water consumption
  Gal. per hr. (max. use)  49.5 
  Gal. per rack  0.9
Temperature °F
  Wash  150 
  Rinse  180
Heating
  Tank heat, electric  5.2 kW 
  Electric Booster  7.5 kW
Time cycle in seconds
  Wash  40 
  Dwell  1 
  Rinse  12 
  Sanitary Dwell  7 
  Total cycle  60
1 HP