Page 1
Project
Item No.
Quantity
84 SERIES RACK CONVEYOR
STANDARD FEATURES
• ENERGY STAR® Qualified
• Dual-pawl cradle drive system
• One-piece cast stainless steel upper & lower spray
arm assemblies for ease of cleaning
• Internal removable scrap basket and
three-piece scrap screen
• Standard vertical opening accommodates
18" x 26" sheet pans
• Wide leakproof swing out insulated hinged doors
on wash/rinse
• Anti-jam conveyor drive system
• Energy Sentinel (Idle pump shut-off)
• Convenient top-mounted controls
• Automatic tank fill
• Door safety switch
• Never leak, ball valve drain closure
• Enclosure panels (front and sides)
• Stainless steel heavy-gauge construction, including
base and feet
• Electric tank heat
• 3 Hp wash and rinse pump motors
• Stainless steel pump and impeller
• Two-point electrical connection
• Self-diagnostic controls
• Vent fan control switch
• Stainless steel rear manifolds
PREWASH MODELS ONLY
• External prewash scrap basket
• Prewash pump 1 Hp motor
• 22" Prewash
• 26” Prewash
• 36" Prewash
84 SERIES
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
Model 84 Shown with Vent
Cowl and Damper Option
SPECIFIER STATEMENT
Specified unit will be Champion model 84 Series high
temperature rack conveyor dishwashing machine.
Features top mounted control cabinet; upper and lower
one-piece stainless steel spray arm assemblies, removable
internal scrap baskets with three-piece scrap screens.
Swing out insulated front access doors. Anti-jam conveyor
drive system.
1 year parts and labor warranty.
Photo is for general visual
representation only. Please
refer to specifications for
the latest detailed product
information.
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
(1M) 7/14 Printed in U.S.A.
CH078
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Champion, an Ali Group Company
Page 2
84 SERIES
1A
8A 8B
2
1A
2
1A
4A
4B
1B
4B
4A
6
5
7
4B
4A
6
5
2
3
3
3
E22PW E26FFPW
16"
34"
Load Height
13"
Plumbing
Clearance
7-1/4"
4-1/4"
20"
Clearance
58-1/8"
Machine
Height
6"
8"
4"
8"
4"
84"
3"
2"
2"
17"
9"
42"
106"
2"
110"
16"
Door
Clearance
5"
88-1/4"
Vent Stack
Distance
54-1/8"
27-3/8"
4-1/2"
50-1/4"
Inside
8-1/4"
8-1/4" 8-1/4" 8-1/4"
2-1/2"
7-1/4"
11-1/8"
12-1/2"
6-1/2"
8-5/8" 8-1/2"
110-1/4"
Vent Stack Distance
107-5/8"
Vent Stack Distance
26-1/4"
50-1/8"
70-1/2"
4-7/8"
1-1/2"
3-1/4"
36-3/8"
29-1/2"
1A
2
1A
4A
4B
2
5
3
E22PW
E26FFPW
16"
2"
2"
2"
36
3
8
"
34
1
4
"
106"
110"
88-1/4"
Vent Stack
Distance
27-3/8"
29-7/8"
4-1/2"
26-1/2"
27" Door
Opening Clearance
4-7/8"
3-1/4"
1-1/2"
50-1/4"
Inside
16"
Door
Clearance
29-1/2"
2-1/2"
107-5/8"
Vent Stack Distance
110-1/4"
Vent Stack Distance
16"
Door
Clearance
88-1/4"
36-3/8"
29-1/2"
36
3
8
"
34
1
4
"
16"
Door
Clearance
29-1/2"
1A
8A 8B
2
1A
2
1A
4A
4B
1B
4B
4A
6
4B
4A
6
5
5
2
3
3
3
E22PW E26FFPW
16"
34"
Load Height
13"
Plumbing
Clearance
7-1/4"
4-1/4"
2-1/2"
29-3/4"
20"
Inside
Track
21-7/8"
Opening
6"
Nominal
Wall
Clearance
8-3/4"
20"
Clearance
58-1/8"
Machine
Height
3-1/4"
6"
8"
4"
8"
4"
84"
3"
2"
2"
17"
9"
42"
106"
2"
110"
16"
Door
Clearance
5"
88-1/4"
Vent Stack
Distance
54-1/8"
27-3/8"
4-1/2"
26-1/2"
27" Door
Opening Clearance
50-1/4"
Inside
8-1/4"
8-1/4" 8-1/4" 8-1/4"
2-1/2"
7-1/4"
11-1/8"
12-1/2"
6-1/2"
8-5/8" 8-1/2"
110-1/4"
Vent Stack Distance
107-5/8"
Vent Stack Distance
26-1/4"
4-7/8"
1-1/2"
3-1/4"
36-3/8"
29-1/2"
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL 84
Front View
Left to Right
2"
2"
2
4-1/2"
16"
26-1/2"
27" Door
Opening Clearance
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Shipping weight crated: 1200 lbs.
8"
8A 8B
4"
2
8-1/4"
3
2-1/2"
17"
11-1/8"
9"
7-1/4"
4B
Vent Stack
Distance
50-1/4"
Inside
54-1/8"
1A
2
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
2"
27-3/8"
8"
Suggested Table
3
1-1/2"
4-7/8"
Plan View
Left to Right
1-1/2"
1-3/4"
5/8"
21"
Construction
3-1/4"
1A
Can be up
to 10"
4A
4B
2-1/4"
5"
4A
6
3
1B
4A
3-1/4"
3
4B
1-1/2"
4-7/8"
1A
Plan View
Right to Left
12-1/2"
26-1/4"
33-7/8"
2"
84"
3"
6
4A
7
70-1/2"
Vent Stack
4B
88-1/4"
Distance
50-1/4"
Inside
42"
Dimensions shown in inches [mm]
8"
4"
1A
6"
Clearance
Load Height
4-1/4"
13"
Plumbing
Clearance
7-1/4"
20"
58-1/8"
Machine
Height
34"
Front View
Right to Left
5
2"
29-7/8"
2
27-3/8"
1A
2"
2
Opening Clearance
16"
4-1/2"
26-1/2"
27" Door
End View
Page 3
84 SERIES
E22PW E26FFPW
E36HDPW
110"
120"
26"
Door
Clearance
16"
Door
Clearance
8-1/4" 8-1/4"
8-5/8" 8-1/2"
107-5/8"
Vent Stack Distance
124-1/4"
Vent Stack Distance
36-3/8"
36-3/8" 34-1/4"
29-1/2"
5
5 5
E22PW
E26FFPW
E36HDPW
36
3
8
"
34
1
4
"
106"
110"
120"
36
3
8
"
16"
Door
Clearance
29-1/2"
26"
Door
Clearance
124-1/4"
Vent Stack Distance
14-1/2"
8-1/4" 8-1/4" 8-1/4"
4-5/8"
2-1/2"
107-5/8"
Vent Stack Distance
110-1/4"
Vent Stack Distance
E36HDPW
110"
120"
26"
Door
Clearance
8-5/8" 8-1/2"
107-5/8"
Vent Stack Distance
124-1/4"
Vent Stack Distance
36-3/8" 34-1/4"
29-1/2"
5
E26FFPW
E36HDPW
34
1
4
"
120"
36
3
8
"
29-1/2"
26"
Door
Clearance
124-1/4"
Vent Stack Distance
14-1/2"
8-1/4"
E36HDPW
120"
26"
Door
Clearance
124-1/4"
Vent Stack Distance
36-3/8" 34-1/4"
E36HDPW
120"
36
3
8
"
26"
Door
Clearance
124-1/4"
Vent Stack Distance
14-1/2"
8-1/4" 8-1/4" 8-1/4"
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
MODEL 106 PW WITH 22" PREWASH
Shipping weight crated:
Vent Stack Distance
5
6-1/2"
1375 lbs.
110-1/4"
Front View
Right to Left
8-1/4"
Left to Right
106"
MODEL 110 FFPW WITH 26" FRONT FEED PREWASH
Shipping weight crated: 1400 lbs.
Front View
Right to Left
8-1/4"
Left to Right
Dimensions shown in inches [mm]
107-5/8"
Vent Stack Distance
5
110"
4-5/8"
MODEL 120 HDPW WITH 36" HEAVY DUTY PREWASH
Shipping weight crated: 1550 lbs.
NOTE: For complete machine dimensions, plan view, end view, specifications and table construction see 84 drawing page.
Front View
Right to Left
Left to Right
Page 4
84 SERIES
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
Dimensions shown in inches
Utilities
1
Electrical Connection
A Machine electrical connection
B Booster electrical connection
2
Hot Water
Main connection 3/4" NPT
3
Cold Water
Contact Factory
4
Hot Water Tank
A Heat inlet connection 1" NPT
B Heat return connection 1" NPT
5
Drain
Connection 1 1/2" NPT
6
Steam
Inlet connection 1 1/4" NPT
7
Condensate
Connection 1" NPT return to boiler
8
Vents
A Stack connection - Load end
150 CFM @ 1/4" static pressure
B Stack connection - Unload end
400 CFM @ 1/4" static pressure
Warning: Plumbing and electrical connections should
be made by qualified personnel who will observe all the
applicable plumbing, sanitary,
safety codes and the National Electrical Code.
Note: Water Hammer Arrestor (meeting ASSE-1010
standard or equivalent) to be supplied (by others)
in common water supply line at service connection.
Plumbing Notes: Because of the variation
in house-supplied steam and water pressures,
steam and water pressure regulating valves
(PRVs) may be needed. (Water PRV is standard
on machines with booster.) The PRVs can either
be purchased from Champion or obtained locally.
Venting Notes: Fabricated duct size:
3-7/8" x 15-7/8" (Outside dimensions)
84 Electric
TABLE A - Machine Connection
Machine only
Minimum
Supply Ckt.
Rated
Amps
Rated
Amps
Rated
Amps
Rated
Amps
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Elec.
Specs.
208/60/3 90 110 110
240/60/3 80 100 100
480/60/3 40 50 50
575/60/3 31 40 40
84 ONLY
TABLE B - Booster Connection
40°F/22°C Rise – 15 kW
Electric built-in booster (booster only)
Elec.
Specs.
208/60/3 42 50 50
240/60/3 36 45 45
480/60/3 18 25 25
575/60/3 15 20 20
70°F/39°C Rise – 24 kW
Electric built-in booster (booster only)
Elec.
Specs.
208/60/3 67 80 80
240/60/3 58 70 70
480/60/3 29 35 35
575/60/3 24 30 30
84 with Steam or Hot Water Heat
TABLE A - Machine Connection
Machine and steam built-in booster
Elec.
Specs.
208/60/3 15 20 20
240/60/3 14 20 20
480/60/3 7 15 15
575/60/3 6 15 15
Contact factory for single phase information.
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
106 PW, 110 FFPW, 120 HDPW Electric
TABLE A - Machine Connection
Machine Only
Minimum
Supply Ckt.
Rated
Amps
Rated
Amps
Rated
Amps
Rated
Amps
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Elec.
Specs.
208/60/3 95 125 125
240/60/3 83 100 100
480/60/3 41 50 50
575/60/3 32 40 40
106 PW, 110 FFPW, 120 HDPW
TABLE B - Booster Connection
40°F/22°C Rise – 15 kW
Electric built-in booster (booster only)
Elec.
Specs.
208/60/3 42 50 50
240/60/3 36 45 45
480/60/3 18 25 25
575/60/3 15 20 20
70°F/39°C Rise – 24 kW
Electric built-in booster (booster only)
Elec.
Specs.
208/60/3 67 80 80
240/60/3 58 70 70
480/60/3 29 35 35
575/60/3 24 30 30
106 PW, 110 FFPW, 120 HDPW
Steam or Hot Water Heat
TABLE A - Machine Connection
Machine and steam built-in booster
Elec.
Specs.
208/60/3 20 25 25
240/60/3 17 25 25
480/60/3 9 15 15
575/60/3 6 15 15
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Page 5
SPECIFICATIONS
Capacity
Racks per hr. (NSF rated) 356
Wash tank (US gal.) 21
Conveyor speed (ft/min.) 9.9
Motor Horsepower
Drive 1/6
Wash 3
Rinse 3
Water Consumption
US Gal. per hr. (max. use) 131
US Gal. per rack .37
Heating
Tank Heat, electric (kW) 25
Tank heat, steam
(lbs/hr. required at
15 PSI flow pressure) 125
Electric booster (built-in)
(kW supplied for 40°F rise) 15
Electric booster
(kW supplied for 70°F rise) 24
Steam booster
(lbs./hr. required for 40°F rise) 75
Steam booster
(lbs./hr. required for 70°F rise) 120
Booster heaters completely inter plumbed,
Controls are interwired
Venting
Load end (minimum CFM) 200
Unload end (minimum CFM) 400
Standard 20" x 20"
rack complement
Peg 2
Flat 1
NEW Exclusive Digital Gauges
One-Piece Cast Stainless Steel
Spray Assembly
84 SERIES
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
NEW Durable Stainless Steel
Start/Stop Switches
Stainless Steel
Built-in Nested Booster
www.championindustries.com
Two-Piece Scrap Screen
Built-in Scrap Basket for ease
of cleaning
Page 6
84 SERIES
84, 106 PW, 110 FFPW, 120 HDPW
High-Temperature
Rack Conveyor Dishwashing Machine
OPTIONS & ACCESSORIES
: Tank heat: choice of steam coil, steam injector, hot water coil
: 2 Hp prewash motor
: 48" Blower-dryer - steam or electric
: Booster Heaters (completely interplumbed, controls
are interwired)
MODEL 84 RACK CONVEYOR
: Steam: 40°F or 70°F rise
: Electric: 15 kW (40°F rise) (built-in only)
: Electric: 24 kW (70°F rise) (built-in only)
: Heat Recovery
Cantilever sideloader (with or without hood) for 90° load operation
: 24" Sideload
: 30" Sideload (accepts sheet pans)
: Extended pawl bar (extended drive unit) for use with
load tabling
: Racks: peg or flat racks (specify type)
: Steam pressure regulating valve (unmounted)
: Table limit switch, unmounted (recommended on all
rack conveyor installations)
: Vent cowl, stainless steel with 7" stack and locking damper
: Extended vent hood, stainless steel with 7" stack and
locking damper
: Water pressure regulating valve (unmounted)
(standard with booster)
: Water hammer kit
NEW CCT 90
90° Corner Conveyor Table (shown)
NEW CCT 180
180° Corner Conveyor Table
also available
Cantilever
Sideloader
(No hood)
: Drain tempering kit
: Vertical clearance through machine: 24"
(instead of standard 20") for larger ware
: Model CCT 180 (180° Corner Conveyor Table)
: Model CCT 90 (90° Corner Conveyor Table)
: Model RCT 64 or RCT 84 Roller Conveyor Table
(See factory for custom length)
Model RCT 64
or RCT 84
Roller
Conveyor Table
: Splash shields
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Loading...