Champion Industries 2566 Specification Sheet

Project
Item No.
Quantity

MODEL 2566 WASHER

STANDARD FEATURES

• Heavy-duty stainless steel construction

• 25 Hp wash pump

• Easy to clean dual filtration system

• Adjustable wash and rinse cycles

• Choice of tanks heat:
electric, infrared gas or steam

• Double skinned, hinged door design

• Digital Control & Information Center

• 66 sheet pan capacity

• Moisture resistant control gauges

• Self-contained water heater

• Recirculating wash water

• Fresh water sanitizing rinse

• Precision engineered spray patterns

• One year parts and labor warranty

MODEL 2566

Cart, Cabinet, Rack and

Pan Washer

(Shown with optional

fold-away ramp)

OPTIONS

Additional Panwasher and Rackwasher Models:

M 1527 M 1536 M 2554 M 3072

Photo is for general visual representation only.
Please refer to specifications for the latest
detailed product information.

Champion Industries, Inc.

3765 Champion Blvd., Winston-Salem, NC 27105

Tel: [phone] Fax: [phone]

2674 N. Service Road,

Jordan Station, Ontario, Canada L0R 1S0

Tel: [phone] Fax: [phone]

www.championindustries.com

(pdf) 7/15

DG015

Champion, an Ali Group brand

MODEL 2566

Cart, Cabinet,
Rack and Pan Washer

Washer

Cabinet

MODEL 2566 WASHER

Door

Washer Floor

Recirculating Wash Tank

Wash Tank Filter

Wash Tank Fill Valve

Wash Tank Drain Valve

Wash Pump

Rotating Wash Hub &
Spray Arm Assembly

Sanitizing Pumped
Rinse Tank

Final Rinse Piping

Control & Information
Center

Optional Rinse Hose

Steam Exhaust Vent

Optional Exhaust Fan

Automatic washing machine designed to wash and sanitize items commonly used in the bakery,
meat, poultry, candy and food service industries. Machine is designed to be installed in a pit or
used at floor level with a ramping system.

70" wide x 90" deep (100" with pass through option) x 101-1/2" high. Clearance height: 122"
when floor mounted, 108" when used in a pit. Standard door opening: 38” wide x 84” high. Wash
chamber: 38" wide x 72" deep x 84" high. Constructed of 12, 14 & 16 gauge, type 304 #3 finish,
stainless steel. All seams tig-welded. Seams, where needed for water tight construction are
continuously welded.

Standard right hand or optional left hand swing constructed of 14 and 16 gauge, type 304 #3,
stainless steel with integral stainless steel framework. Door double skinned for added strength.
Equipped with door latch and inside release handle. Door is interlocked with limit switch to
prevent machine operation while open.

Floor constructed of 12 gauge stainless steel formed sheets designed to provide maximum
strength. Floor supports constructed of 2" x 2" x 1/4" stainless steel angle.

Heated by 208/240 or 480 Volt electric immersion heaters, 42 kW total, thermostatically
controlled wash temperature with low water protection system. 180 gallon capacity. 14 gauge
stainless steel, sloped to drain. Gas and steam heating options available.

Perforated,stainless steel baskets. Designed for increased effectiveness and easy cleaning without
emptying wash tank.

Size 3/4" brass material, solenoid type for automatic.

Size 2" brass material, gate type for manual or electrically operated ball valve for
automatic option.

25 H.P., 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 430 gallons per minute at 40 to
50 psi, mounted on 12 gauge stainless steel formed channel base.

Water driven, stainless steel spray arm assembly with stainless steel jets removable end caps
and hand operated quick release mechanism for easy cleaning and reassembly. Mounted on
stainless steel base.

Stainless steel,14 gauge, 60 gallon capacity, supplied with 1-1/2 H.P. pump to provide 20 gallons
of 180°/190°F. hot sanitizing rinse per 30 second cycle at 20 P.S.I. Thermostatically controlled,
low water protected with automatic ll. Available in electric, gas or steam coil heating.

Type 304 stainless steel tubing with brass compression ttings and brass or optional
stainless steel full cone rinse jets.

120 volt control circuit with push pad operation of “Power On,” “Stop” and “Short, Medium or
Long Wash Cycles.” A digital display indicates “Time Remaining” for each cycle. LED’s indicate
wash, rinse and unload functions. A buzzer is also included to provide an audible indication
when the machine is ready to unload. A preprogrammed circuit board allows the push pad
to be used as a “Diagnostic Center” by displaying “Error Codes” for ease of troubleshooting.
Moisture resistant gauges measure Wash Temperature, Wash Pressure and Rinse Temperature.

Externally mounted rinse hose with spray gun for easy cleaning and maintenance of machine.

Steam exhaust vent 12-7/8" diameter, consisting of 14 gauge rolled stainless steel, collar mounted to
the top of the machine. Machine pre-wired with control timer for the addition of a fan.

12" diameter exhaust fan mounted on washer to extract steam after rinse cycle. Constructed for
moisture laden air or other air stream contaminants. 500 CFM @ .05" static pressure. 1/4 H.P., 1750 RPM.

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]