Champion Industries 1536-N Specification Sheet

Project
Item No.
Quantity

model 1536-N washer

sTaNdard FeaTures

• Heavy-duty stainless steel construction

• Self contained water heater

• Removable filter basket

• Electrical control box

• Wash/rinse cycle 5 minutes

• Automatic fill

• Wash cycle selection switch

• Loading ramp up to 8

• Adjustable wash and rinse cycles

• Electric, infrared gas or steam heating

• Digital control & information center

• Recirculating wash water

• Freshwater sanitizing rinse

• Easy to clean, dual filtration system

• Moisture resistant control gauges

" long or pit grid

model 1536-N

Pot, Pan and

Utensil Washer

oPTIoNs

2nd door and extended cabinet for pass
through operation

External wash down hose

Autodrain

Steam extraction fan

Fold-away ramp system

Additional racks

(1M) 6/11 Printed in U.S.A.

DG013

sPeCIFIer sTaTemeNT

Specified unit will be Champion Industries model 1536-N
pot, pan and utensil washer.

Features include four rotating hubs fitted with jet arms
and high-velocity, fast cutting spray nozzles, wash/rinse
cycle of 5 minutes, self contained water heater, fresh
water sanitizing rinse, moisture resistant control gauges,
and removable filter baskets.

1 year parts and labor warranty.

Champion Industries, Inc.

3765 Champion Blvd., Winston-Salem, NC 27105

Tel: [phone] Fax: [phone]

2674 N. Service Road,

Jordan Station, Ontario, Canada L0R 1S0

Tel: [phone] Fax: [phone]

www.championindustries.com

model 1536-N

Pot, Pan and
Utensil Washer

Washer

Cabinet

model 1536-N washer

Door

Washer Floor

Recirculating Wash Tank

Filters

Wash Pump

Rotating Wash Hub &
Spray Arm Assembly

Sanitizing Rinse Tank

Rinse Valve

Final Rinse Piping

Control And
Information Cente

External Rinse Hose

Automatic washing machine designed to wash and sanitize items commonly used in
the bakery, meat, poultry, candy and food service industries. Machine is designed to be
installed in a pit or used at floor level with a ramping system.

60" wide x 56-1/2" deep x 93" high. Clearance height: 123" Standard door opening:
32" wide x 76-1/2" high. Wash chamber: 32" wide x 38-1/2" deep x 76-1/2" high.
Constructed of 14 gauge, type 300 #3 finish, Stainless Steel . All seams
tig-welded, cleaned and polished.

Standard right hand or optional left hand swing constructed of 16 and 18 gauge, type
300 #3, stainless steel with integral stainless steel frame work. Door double skinned for
added strength. Equipped with door latch and inside release handle. Door is interlocked
with limit switch to prevent machine operation while open.

Floor constructed of 12 gauge stainless steel formed sheets to provide maximum
strength. Floor supports constructed of 2" x 2" x 1/4" stainless steel angle.

Heated by 208/240 or 480 volt electric immersion heaters, 18 KW total, thermostatically
controlled wash temperature with low water protection system. 90 gallon capacity
(79 gallons if infrared heated), 14 gauge stainless steel, sloped to drain. Infrared gas
and steam heating options available.

Perforated, stainless steel screen type. Double filter system for increased effectiveness
and easy cleaning without emptying wash tank.

15 hp, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 250 gallons per minute at
35 to 45 psi.

Water-driven stainless steel spray arm assembly with stainless steel jets, removable end
caps and hand-operated, quick-release mechanism for easy cleaning and reassembly.

Stainless steel, 20 gallon capacity, 18 KW total. Uses 12 gallons per 30 second cycle.
Infrared gas and steam heating options available, as well as pumped rinse system

Size 1" brass material, solenoid type, automatic.

Type 300 stainless steel tubing with brass compression ttings and full cone rinse jets.

120 volt control circuit with push pad operation of “Power On,” “Stop” and “Short,
Medium or Long Wash Cycles.” A digital display indicates “Time Remaining” for each cycle.
LED’s indicate wash, rinse and unload functions. A buzzer is also included to provide
an audible indication when the machine is ready to unload. A pre-programmed circuit
board allows the push pad to be used as a “Diagnostic Center” by displaying “Error Codes”
for ease of troubleshooting. Moisture resistant gauges measure wash temperature, wash
pressure and rinse temperature.

Externally mounted rinse hose with spray gun for easy cleaning and maintenance
of machine.

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]

model 1536-N

Pot, Pan and

Utensil Washer

model 1536-N washer

Steam Exhaust Vent

Optional Exhaust Fan

Racks

Connections

Services

Steam exhaust vent 12-7/8" diameter, consisting of 16 gauge rolled stainless steel,
collar bolted to the top of the machine. Machine pre-wired with control timer for the
addition of a fan.

12" diameter exhaust fan mounted on washer to extract steam after rinse cycle.
Constructed for moisture laden air or other air stream contaminants. 500 CFM @
.5" static pressure. 1/4 hp, 1750 RPM.

Customized to hold your specific items. Constructed of stainless steel rod and formed
angle, Heliarc welded. Supplied with stainless steel casters and nylon wheels.

Water Inlet: 120°F, 1" NPT
Water Drain: 2" NPT
Overow: 1-1/4" NPT
Electrical: Two point connection, except 575 volt, which is single point.
Steam Heating Option: 1/2" NPT
Natural or Propane Gas Heating Option: 1/2" NPT

120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:

Running Amps

2

Elec. Spec.

208 Volt

3 phase

Electric Wash

Electric Booster

139

Steam Wash

Steam Booster

39

1

Infrared Gas Wash

Infrared Gas Booster

39

240 Volt

3 phase

480 Volt

3 phase

1

Steam Supply: Consumption: 195 lbs./hr. @ 15 psi minimum

2

Gas Supply: Consumption: 150,000 BTU/hr. 1/2 lb. pressure minimum

124

62

37

18

37

18

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]

model 1536-N

Pot, Pan and
Utensil Washer

model 1536-N washer

Dimensions shown in inches

sPeCIFICaTIoNs

Machine Construction

12, 14, & 16 gauge stainless steel. All seams Heliarc welded.

Door

Double skinned stainless steel with exterior latch and inside

release handle.

Spray Arm Assembly

Water driven, stainless steel spray arm assembly with

stainless steel jets, removable end caps and hand operated
quick release mechanism for easy cleaning and reassembly.
Mounted on stainless steel base.

Filter

Perforated stainless steel screen type. Double filtration

system for increase effectiveness and easy cleaning without
emptying tank.

Water Pump

15 Hp, 208/240/480 volt, 3 phase, 60 cycle with output of

250 gallons per minute at 35 to 45 PSI.

Digital Control & Information Center

120 volt control circuit with push pad operation of “Power

On”, “Stop” and “Short, Medium or Long Wash Cycles”. A
digital display indicates “TIME REMAINING” for each cycle.
LED’s indicate wash, rinse and unload functions. A buzzer
is also included to provide an audible indication of time to
unload. A pre-programmed circuit board allows the push
pad to be used as a “Diagnostic Center” by displaying “Error
Codes” for ease of troubleshooting.

Gauges

Special moisture gauges measure wash temperature,

and rinse temperature, wash jet pressure.

Wash Tank

Stainless steel with electric, infrared gas, steam or steam

coil heating, thermostatically controlled, low water
protected, sloped to drain with a 90-gallon capacity.

Racks

Stainless steel built to match specific washing requirements.

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]