Champion Industries 1527-N Specification Sheet

Project Item No. Quantity
MODEL 1527-N WASHER
STANDARD FEATURES
Heavy-duty stainless steel construction
Self-contained water heating
Fresh water sanitizing rinse
Adjustable wash and rinse cycles
Easy to clean, dual filtration system
Electric, infrared gas or steam heating
Moisture resistant control gauges
Designed for pit or ramp installations
Digital Control & Information Center
One-year parts and labor warranty
MODEL 1527-N
Rack, Pan and
Utensil Washer
OPTIONS
Additional Panwasher and Rackwasher Models:
1527 1536
SD-36 1536-N 2554 3072
(1M) 10/06 Printed in U.S.A.
DG012
2048 3060
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
www.championindustries.com
MODEL 1527-N
54"
50"
Rinse Tank
12" Diameter Vent
Rotating Washer Arm Assemblies
55"
5
30"
Door
Opening
R
76-1/2"
Door
Opening
80"
123"
13"
93"
H
ot Water
Connection
Electrical
Control Panel
Wash Thermometer
Wash Pressure Gauge
Rinse Thermometer
Digital Control and Information Center
Wash Down Hose
with Spray Nozzle
Overow Connection
Drain Valve
Wash Pump
R
56-1/2"
Rack, Pan and Utensil Washer
MODEL 1527-N WASHER
Dimensions shown in inches
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge Stainless steel. All seams Heliarc welded.
Door
Double skinned stainless steel with exterior latch and inside release handle.
Spray Arm Assembly
Stainless steel jets, removable end caps and hand operated quick release mechanism for easy cleaning and reassembly.
Filter
Perforated stainless steel screen type. Double filtration system for increased effectiveness and easy cleaning without emptying the tank.
Water Pump
15 Hp, 208/240/480 volt, 3 phase, 60 cycle with output of 250 gallons per minute at 35 to 45 P.S.I.
Digital Control & Information Center
110 volt control circuit with push pad operation of “Power On”, “Stop” and “Short, Medium or Long Wash Cycles”. A digital display indicates “Time Remaining” for each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also included to provide an audible indication of time to unload. A pre-programmed circuit board allows the push pad to be used as a “Diagnostic Center” by displaying “Error Codes” for ease of troubleshooting.
Gauges
Special moisture resistant gauges measure wash temperature, rinse temperature and wash jet pressure.
Wash Tank
Stainless steel with electric, infrared gas, steam or steam coil heating, thermostatically controlled, low water protected, sloped to drain with a 72-gallon capacity.
Racks
Stainless steel rod built to match specific washing requirements.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Loading...
+ 2 hidden pages