Champion HBT200 User Manual

EN

HBT200

USER MANUAL

Read this manual before use

Before using HBT200

Please read the following instructions before using your Champion HBT200 headphones.

1. Firstly make sure the headphones are fully loaded.

2. Before pairing, make sure that your smartphone/bluetooth device has the bluetooth function
turned on.

Charging HBT200 headphones:

Use the Micro USB cable (11) that is included in the package and connect it to your HBT200.
Connect the USB-connector to a suitable charging unit and make sure that it is connected.

Product overview

10

4

11

2

6

3

1

5

89

7

1. Play/Paus 2. Previous 3. Next

4. Volume + 5. Volume - 6. Mic

7. Power On/Off, Call 8. DC (Charge port) 9. AUX in

10. 3.5mm Audio Cable 11. Micro-USB Cable

Basic Instructions

Power On

When you turn on the HBT200 headphones, please press and hold the Power button (7) for
approximately 3 seconds until you hear a sound that indicates that the unit is turned on. At the
same time, the blue light begins to flash.

Power Off

When the headphones are turned on, press and hold the Power button (7) for approximately
3 seconds. The blue light will turn off and you will hear a sound that indicates that the power is
turned off.

Pairing

When you pair the HBT200 for the first time, please make sure that your device supports
bluetooth and that the bluetooth function is turned on.

- Keep the headphones and bluetooth device close to each other during the pairing process.

- Turn on the HBT200, press and hold the Power button (7) for about 3 seconds. The blue light on
the headphones will start flashing.

- Activate Bluetooth on your phone and set it to search for new devices.

- Select ”HBT200”, when the pairing is successful the blue light will flash twice.

Call

When your HBT200 is connected to your phone you can use the headphones to answer your calls.
For answering a call press the ”Power/Call” button (7) once. If you wish to reject a call, press and
hold the Power/Call button for approximately 2 seconds.

Redial

If you wish to redial the latest phonenumber, press the ”Power/Call” button (7) 2 times.

Play/Paus Music

When listening to music, press the ”Play/Pause” (7) button to start or pause the track you are
currently listening to.

Forward/Previous

By pressing ”Previous” (2) or ”Forward/Next” (3) you can change song.

Volume

When listening to music or taking a call and wish to adjust the volume, press ”Volume+”/
”Volume-” (4/5) to increase or decrease the volume.

AUX-in

If you wish to connect your device by 3.5mm audio cable instead of bluetooth, connect the HBT200
(9) with the included 3.5mm audio cable (10) directly to your audio device.

CE, RoHS and REACH

From 2013, electrical and electronic equipment must be equipped with the CE mark to show
that the equipment complies with all relevant EU directives. The CE mark will now be the only
mark indicating that the product fulfills the RoHS requirements. REACH compliant indicate that
the product does not contain impermissible levels of substances in the candidate list of substances
which could have significant effects on human health or the environment.

Specifications

Bluetooth Version: CSR 4.0
Type: DynamicDriver

Diameter: Φ40mm
Impedance: 32Ω

Sensitivity: 102dB
Frequency Response:20Hz-20kHz
Maximum input power:100mW
Talk time: 8 hours
Standby time: 185hours
Bluetooth range: 10meters

SE

HBT200

BRUKSANVISNING

Läs instruktionerna noga innan användning

Innan användning

Läs följande instruktioner innan du använder Champion HBT200 för första gången.

1. Försäkra dig om att hörlurarna är fulladdade.

2. Se till att din smartphone/bluetooth enhet har bluetooth funktionen igång och i upptäckbart
läge.

Ladda HBT200

Använd Micro-USB kabeln (11) som medföljer vid leverans och koppla in den i hörlurarna.
Koppla USB kontakten till lämplig laddningskälla.

Översikt

10

4

11

2

6

3

1

5

89

7

1. Play/Paus 2. Föregående 3. Nästa

4. Volym + 5. Volym - 6. Mic

7. On/Off, Samtal 8. DC (laddning) 9. AUX in

10. 3.5mm ljudkabel 11. Micro-USB kabel