Champion EUCC SERIES General Manual
Project
Item No.
Quantity
EUCC SERIES UPRIGHT CONVEYORS
STANDARD FEATURES
• Exclusive Dual Rinse Technology
• All-purpose 24"-wide peg belt
• Dish capacities up to 16,495 dishes per hour (NSF Listed)
• Automatic tank fill
• Chemical dispensing equipment
connection provisions
• Choice of tank heat: electric, steam
coils or direct steam injectors
• Common hot water connection
• Common drain connection
• Common electric connection
(separate connection required for
optional electric booster and blower-dryer)
• One piece stainless steel wash/rinse
manifold system, easy to remove
• Door safety switch
• Electric eye energy sentinel (idle pump shut-off)
• Easy-to-reach top-mounted controls
• Heavy-gauge stainless construction
• Low-water tank heat protection
• Push-button start-stop station – load end
• Recirculating flushing nozzles – load end with prewash
• Rinse saver device
• Conveyor shut-off shelf – unload end
• Stainless steel enclosure panels – front & ends
• Vent fan control connection provided
OPTIONAL WORLD CLASS FEATURES
• Heat Recovery - redirects lost steam to heat
using less energy
EUCC SERIES
Upright 24" Conveyor
Dual Rinse Dishwashing Machine
A compact footprint that also reduces energy
consumption by more than 58%
SPECIFIER STATEMENT
Specified unit will be Champion model EUCC4,
EUCC6 or EUCC8 upright 24" conveyor water
saver dishwashing machine.
Features automatic tank fill, chemical dispensing
connection provisions, common water, drain and
electrical connections, door safety switch, low
water tank heat protection, rinse saver.
1 year parts and labor warranty.
The DualRinse feature offers the
Lowest Water/Utility/Chemical Consumption
as low as 113 GPH usage while circulating
as much as 410+ gallons of water for
Consistently Good Results
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
(3M) 4/10 Printed in U.S.A.
CH089
Champion Industries, Inc.
3765 Champion Boulevard, Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
EUCC SERIES
Upright 24" Conveyor
Dual Rinse
Dishwashing Machine
Shipping weight crated: 150 lbs./ft. [68kg./m.]
Height with doors up: 95"
Height to remove doors: 100"
SPECIFICATIONS
Capacities EUCC4 EUCC6 EUCC8
Dishes per hr. (NSF rated) 10,472 13,221 16,495
Conveyor speed (ft./min.) 8.0 10.1 12.6
Motor horsepower
Drive 1/2 Hp 1/2 Hp 1/2 Hp
Prewash 30" [762] 1 Hp 1 Hp 1 Hp
Prewash 48" [1219] 3 Hp 3 Hp 3 Hp
Wash 3 Hp 3 Hp 3 Hp
Power Rinse* N/A 3 Hp 3 Hp
Auxiliary Rinse 1/5 Hp 1/5 Hp 1/5 Hp
Water consumption
Gal. per hr. (max. use) 115 113 141
Temperatures °F
Wash (min.) 160 150 150
Power Rinse (min.)* N/A 160 160
Auxiliary Rinse (min.) 165 165 165
Final rinse (min.) 180 180 180
Heating
Tank heat Steam Electric
Wash tank 125 lbs./hr. 25 kW
Rinse tank * 100 lbs./hr. 20 kW
Auxiliary rinse 50 lbs./hr. 10 kW
Electric booster 15 15 16
(kW required for 40°F rise)
Electric booster 25 25 28
(kW required for 70°F rise)
Steam booster 75 75 80
(lbs./hr. required for 40°F rise)
Steam booster 125 125 135
(lbs./hr. required for 70°F rise)
Venting
Minimum cfm, load end 300
Minimum cfm, unload end 800
*EUCC4 has no power rinse tank
Utilities EUCC4
1
Electrical
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCC6
1
Electrical
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCC8
1
Electrical
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Booster connections may vary. Contact the Factory.
Standard Voltages (Specify choice): 208/60/3, 240/60/3, and
480/60/3. Available in 3-phase only. For non-standard 3-phase voltages,
contact the Factory.
Plumbing Notes Because of the variation in house-supplied water
pressure, a water pressure regulating valve (PRV) is needed (water
PRV is standard). Steam PRV’s may be required for pressure higher
than 30 psi. The PRVs can either be purchased from Champion or
obtained locally.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Warning Plumbing and electrical connections should be made by
qualified personnel who will observe all the applicable plumbing,
sanitary, safety codes and the National Electrical Code.
Note Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied (by others) in common water supply
line at service connection.
Venting Notes
Fabricated duct size: 3-7/8" x 23-7/8" (outside dimensions)
Loading...