Project
Item No.
Quantity
EUCC SERIES UPRIGHT CONVEYORS
STANDARD FEATURES
• NEW Factory authorized startup
• ENERGY STAR® Qualified (EUCC6 & EUCC8 only)
• Exclusive Dual Rinse Technology
• All-purpose 24”-wide peg belt
• Dish capacities up to 16,495 dishes per hour (NSF Listed)
• Automatic tank fill
• Chemical dispensing equipment
connection provisions
• Choice of tank heat: electric, steam
coils or direct steam injectors
• Common hot water connection
• Common drain connection
• Common electric connection
(separate connection required for
optional electric booster and blower-dryer)
• One piece stainless steel wash/rinse
manifold system, easy to remove
• Door safety switch
• Electric eye energy sentinel (idle pump shut-off)
• Easy-to-reach top-mounted controls
• Heavy-gauge stainless construction
• Low-water tank heat protection
• Push-button start-stop station – load end
• Recirculating flushing nozzles – load end with prewash
• Rinse saver device
• Conveyor shut-off shelf – unload end
• Stainless steel enclosure panels – front & ends
• Vent fan control connection provided
OPTIONAL WORLD CLASS FEATURES
• Heat Recovery - redirects lost steam to heat
using less energy
EUCC SERIES
Upright 24" Conveyor
Dual Rinse Dishwashing Machine
Photo is for general visual
representation only. Please refer
to specifications for the latest
detailed product information.
A compact footprint that also reduces energy
consumption by more than 58%
SPECIFIER STATEMENT
Specified unit will be Champion model EUCC4,
EUCC6 or EUCC8 upright 24" conveyor water
saver dishwashing machine.
Features automatic tank fill, chemical dispensing
connection provisions, common water, drain and
electrical connections, door safety switch, low water
tank heat protection, rinse saver.
1 year parts and labor warranty.
The DualRinse feature offers the
Lowest Water/Utility/Chemical Consumption
as low as 48 GPH usage while circulating
as much as 410+ gallons of water for
Consistently Good Results
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905-562-4195 Fax: 905/562-4618
(1M) 4/16 Printed in U.S.A.
CH089
Champion Industries, Inc.
3765 Champion Boulevard, Winston-Salem, NC 27105 Tel:
336/661-1556 Fax: 336/661-1979
www.championindustries.com
Champion, an Ali Group Company
EUCC SERIES
Upright 24" Conveyor
Dual Rinse
Dishwashing Machine
MODULAR SECTIONS: Right to Left Operation
Dimensions shown in inches and [millimeters]
EUCC4
16" [406]
33-5/8"
CL
[854]
2
1/2 HP
36" [914]
TABLE A - Machine Connection
Machine Only - Electric Heat
Minimum
Supply Ckt.
Elec.
Specs.
Rated
Amps
Conductor
Ampacity
208/60/3 171 200 200
240/60/3 149 175 175
480/60/3 74 90 90
TABLE B - Booster Connection
40°F/22°C Rise – 15kW Electric Built-in Booster
Minimum
Supply Ckt.
Elec.
Specs.
Rated
Amps
Conductor
Ampacity
208/60/3 42 60 60
240/60/3 36 45 45
480/60/3 18 25 25
4'
[1219]
9-3/8" [238]
“B”
Unload
7" [179]
10-1/2"
[267]
2
Maximum
Overcurrent
Protective
Device
Maximum
Overcurrent
Protective
Device
5'-8"
[1727]
Load
2'-6"
[762]
PrewashDual
HP
Maximum
Overcurrent
Protective
Device
1'-10"
"A"
[102]
4"
4A
1-5/8"
[41]
Notes:
• Load Section (A) Standard 5',
• Prewash also available in a
• Non-standard load section
• Minimum load length 5'
[610]
Rinse
2'
9'-4" CL-CL
[2845]
26-1/4"
Overall Length “C”
4' [1219]
Wash
1
Wash
31
0.2
HP
HP
[667]
Minimum For Screen Removal
5-1/2" [140]
4B
4"
4B
Machine-steam
Minimum
Supply Ckt.
Elec.
Specs.
Rated
Amps
Conductor
Ampacity
208/60/3 21 25 25
240/60/3 18 25 25
480/60/3 10 15 15
1
2'-1"
4A
[635]
3
[559]
7" [179]
Clearance
3
CL
24" [610]
Clearance
19" [483]
38" [965]
6" [152]
6-1/4" [159]
12" [305]
Plumbing
Clearance
100" [2540]
Removal
95" [2413]
Doors Up
62" [2337]
Machine
Start/Stop
contains 30" Prewash
48" HD section
available in 12" increments
32"
[813]
Door
Height
Plumbing
Clearance
(includes 30" prewash)
• Unload Section (B) Standard
70°F/39°C Rise - 25kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 70 90 90
240/60/3 60 80 80
480/60/3 30 40 40
Contact Factory for additional voltages.
5 ft contains 24" Aux.
• Rinse available in 12" increments
• Built in electric booster requires
a 5' minimum unload
• Built in steam booster requires
a minimum 6' unload
• Blow dryer section adds 4' to
overall length of machine
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Plumbing
Clearance
EUCC SERIES
Upright 24" Conveyor
Dual Rinse
Dishwashing Machine
MODULAR SECTIONS: Right to Left Operation
EUCC6
4B
16" [408]
CL
33-5/8"
[854]
12" [305]
11'-4" CL-CL
[3454]
13-5/8"
[346]
Dimensions shown in inches and [millimeters]
5'-8" [1727]
[635]
2'-1"
1'-10"
[559]
1
4A
3
CL
24" [610]
Clearance
6" [152]
32"
[813]
2
36" [914]
1/2 HP
4'[1219]
10-1/2"
[267]
“B”
Unload
7" [179]
2
4B
TABLE A - Machine Connection
Machine Only – Electric Heat
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 183 250 250
240/60/3 158 200 200
480/60/3 80 100 100
TABLE B - Booster Connection
40°F/22°C Rise – 10kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 28 35 35
240/60/3 24 30 30
480/60/3 12 15 15
26-1/4"
[667]
Overall Length “C”
6' [1829]
Wash/Rinse
2'
[610]
[102] [102]
4"
Dual
Rinse
0.2
3'
[914]
Power
Rinse
3
HP
Minimum For Screen Removal
“A”
Load
3'
[914]
5-1/2" [140]
1
Wash
31
HP
2'-6"
[762]
Prewash
4"
HPHP
Machine-steam
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 29 40 40
240/60/3 26 35 35
480/60/3 14 20 20
70°F/39°C Rise –18kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 50 60 60
240/60/3 44 50 50
480/60/3 22 30 30
Contact Factory for additional voltages.
6-1/4 [159]"
1-5/8"
[41
4A
7" [179]
3
19" [483]
Clear
38" [965]
12" [305]
Plumbing
Clearance
100" [2540]
Door
Removal
95" [2413]
Doors
Up
62" Machine
Height
Start/Stop
Notes:
• Load Section (A) Standard 5',
contains 30" Prewash
• Prewash also available in a
48" HD section
• Non-standard load section
available in 12" increments
• Minimum load length 5'
(includes 30" prewash)
• Unload Section (B) Standard
5 ft contains 24" Aux.
• Rinse available in 12" increments
• Built in electric booster requires
a 5' minimum unload
• Built in steam booster requires
a minimum 6' unload
• Blow dryer section adds 4' to
overall length of machine
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
EUCC SERIES
Upright 24" Conveyor
Dual Rinse
Dishwashing Machine
MODULAR SECTIONS: Right to Left Operation
EUCC8
4B
16" [406]
CL
33-5/8"
[854]
2
9-3/8" [238]
4' [1219]
13'-4" [4064] CL-CL
Overall Length “C”
Dimensions shown in inches and [millimeters]
5'-8" [1727]
26-1/4"
[667]
Minimum For Screen Removal
2'-1"
[635]
1'-10"
[559]
1
4A
3
CL
24" [610]
Clear
6" [152]
6-1/4" [159]
32"
[813]
Plumbing
Clearance
“B”
Unload
4"
4B
36" [914]
1/2 HP
10-1/2"
[267]
2
TABLE A - Machine Connection
Machine Only - Electric Heat
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 183 250 250
240/60/3 158 200 200
480/60/3 80 100 100
TABLE B - Booster Connection
40°F/22°C Rise – 18kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 44 60 60
240/60/3 28 50 50
480/60/3 19 25 25
8' [2438]
Wash/Rinse
2' 2'-6"
Dual
Rinse
0.2
HP
Power
Rinse
3
HP
4'4'
[1219][1219][610]
1
5-1/2" [140]
Wash
3
HP
Prewash
Machine-steam
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 21 25 25
240/60/3 18 25 25
480/60/3 10 15 15
70°F/39°C Rise - 32kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 77 100 100
240/60/3 67 90 90
480/60/3 34 45 45
[762]
“A”
Load
[102][102]
4"
4A
7" [179]7" [179]
1
HP
1-5/8"
[41]
3
19" [483]
Clear
38" [965]
12" [305]
Plumbing
Clearance
100" [2540]
Door
Removal
95" [2413]
Doors
Up
62" [1575]
Machine
Height
Start/Stop
Notes:
• Load Section (A) Standard 5',
contains 30" Prewash
• Prewash also available in a
48" HD section
• Non-standard load section
available in 12" increments
• Minimum load length 5'
(includes 30" prewash)
• Unload Section (B) Standard
5 ft contains 24" Aux.
• Rinse available in 12" increments
• Built in electric booster requires
a 5' minimum unload
• Built in steam booster requires
a minimum 6' unload
• Blow dryer section adds 4' to
overall length of machine
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
EUCC SERIES
Upright 24" Conveyor
Dual Rinse
Dishwashing Machine
Shipping weight crated: 150 lbs./ft.[68kg./m.]
Height with doors up: 95"
Height to remove doors: 100"
SPECIFICATIONS
Capacities EUCC4 EUCC6 EUCC8
Dishes per hr. (NSF rated) 10,472 11,127 16,495
Conveyor speed (ft./min.) 8.0 8.5 12.6
Motor horsepower
Drive 1/2 Hp 1/2 Hp 1/2 Hp
Prewash 30" [762] 1 Hp 1 Hp 1 Hp
Prewash 48" [1219] 3 Hp 3 Hp 3 Hp
Wash 3 Hp 3 Hp 3 Hp
Power Rinse* N/A 3 Hp 3 Hp
Auxiliary Rinse 1/5 Hp 1/5 Hp 1/5 Hp
Water consumption
Gal. per hr. (max. use) 115 48 141
Temperatures °F
Wash (min.) 160 150 150
Power Rinse (min.)* N/A 160 160
Auxiliary Rinse (min.) 165 165 165
Final rinse (min.) 180 180 180
Heating
Tank heat Steam Electric
Wash tank 125 lbs./hr. 25 kW
Wash tank (EUCC4) 225 lbs./hr. 45 kW
Rinse tank * 100 lbs./hr. 20 kW
Auxiliary rinse 50 lbs./hr. 10 kW
Electric booster 15 10 16
(kW required for 40°F rise)
Electric booster 25 18 28
(kW required for 70°F rise)
Steam booster 75 50 80
(lbs./hr. required for 40°F rise)
Steam booster 125 90 135
(lbs./hr. required for 70°F rise)
Venting
Minimum CFM, load end 300
Minimum CFM, unload end 800
*EUCC4 has no power rinse tank
Utilities EUCC4
1
Electrical
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection, 62 gpm max flow rate
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCC6
1
Electrical
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection, 62 gpm max flow rate
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCC8
1
Electrical
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection, 62 gpm max flow rate
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Booster connections may vary. Contact the Factory.
Standard Voltages (Specify choice): 208/60/3, 240/60/3, and
480/60/3. Available in 3-phase only. For non-standard 3-phase voltages,
contact the Factory.
Plumbing Notes Because of the variation in house-supplied water
pressure, a water pressure regulating valve (PRV) is needed (water PRV
is standard). Steam PRV’s may be required for pressure higher than 30
psi. The PRVs can either be purchased from Champion or obtained
locally.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Warning Plumbing and electrical connections should be made by
qualified personnel who will observe all the applicable plumbing,
sanitary, safety codes and the National Electrical Code.
Note Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied (by others) in common water supply
line at service connection.
Venting Notes
Fabricated duct size: 3-7/8" x 23-7/8" (outside dimensions)
Champion, an Ali Group Company
EUCC SERIES
Upright 24" Conveyor
Dual Rinse
Dishwashing Machine
Control Panel
OPTIONS & ACCESSORIES
EUCC SERIES UPRIGHT CONVEYOR
□ Tank heat; choices of electric, steam coil or
steam injectors
□ Booster Heaters – stainless steel (completely inter-
plumbed, controls are inter-wired)
□ Electric: (40°F rise or 70°F rise)
□ Steam: (40°F or 70°F rise)
□ 48” Blower Dryer, electric or steam (add 4’ to
overall length)
□ Belts: standard peg belt, flat belt, thermal tray belt,
silverware belt, belts with upper cross
rods, and other select combination belts
□ Start/Stop station, unload end
□ Back panels, stainless steel
□ Cold water thermostat (for pre-wash)
□ External scrap bucket on 48” pre-wash
(standard on 30” pre-wash)
□ External scrap bucket on wash tank
□ Insulated hoods, lower panels
□ Motor pumps, 2 or 3 Hp optional in lieu of
1 Hp on pre-wash
□ Bumper rail, machine mounted
□ Steam pressure regulating valve (unmounted)
□ Drain water tempering kit (mounted)
□ Insulated hinged door
Digital Gauges
Heat Recovery –
Redirects lost steam to heat using less energy.
(available on EUCCW6,
EUCCW8 and EUCCW4 only)
□ Shock arrestor (water)
□ Drain interlocks
□ Heat Recovery Unit redirects lost steam to
� NEW Champion ION scale prevention system
Durable Stainless Steel
Heated 110°F water
travels back to booster
Water leaves
booster at
180°F+
and travels to
nal rinse arms
Booster
heat using less energy
Start/Stop Switch
60°F incoming water
to machine.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Loading...