
PATENTED BY MICHAEL AND BART BELLON

The Chameleon® Extender has been patented
(US Patent 8,783,212 B2 and EP pending) and
designed by Michael and Bart Bellon. By
affixing your ecollar brick to the Chameleon®
Extender, you will be able to benefit from the
Chameleon® collar design while being able to
use your existing brand (limited to Martin
System, D o g t ra, D o g Trace, E -Co ll ar
Technologies, Garmin, Sit Means Sit, and Sport
Dog brands).
With the Chameleon® Extender, you can have
one brick collar and have the utility of two
bricks. You can have more than one positive
and negative contact point. Additionally, with
the Chameleon® Extender, you can move your
contacts and change the number of contacts to
have optimal contact and best sensitivity for
your dog. You can move the contact points as
frequently as necessary to eliminate possibility
of necrosis. Additionally, you can use the
Chameleon® Feather Contacts which are
compatible with the Chameleon® Extenders
(and all Chameleon® collars) and give the best
contact with flexible comfort.
To affix the brick to the Chameleon® Extender,
you unscrew your contact points and then place
your brick on the Chameleon® Extender and
then screw your bolts (or your screws) back on
the brick. Whether you use bolts or screws
when attaching the brick is specific to each
brand. After tightening the screws/bolts well
with a special wrench (delivered in the package
with your Extender), then you cover the holes at
the inside of your Chameleon® Extender with
the two delivered plastic covers. The plastic
covers need only to be pushed on.
You can purchase the feathers as an option to
ensure optimal contact.

The Chameleon® Extender Multi Brand Compatible (CEMB®) is available in
Medium size (26,5 cm) and Large size (31,1 cm). Measurements do not include
any part of the elastic or the Perfect Fit Closure.
•
The medium size (26,5 cm) has one central island in the center and 2 islands on either
size, each of which can accommodate up to 3 contact points/plastic screws, and the
end island that can support 2 contact points/plastic screws .
•
The large size (31,1 cm) has one central island in the center and 3 islands on either
size, each of which can accommodate up to 3 contact
points/plastic screws, and the end island that can
support 2 contact points/plastic screws .
For the CEMB®, it is compatible with:
• Martin System
• Dogtra
• Dog Trace
• E-Collar Technologies
• Garmin
• Sit Means Sit
• Sport Dog
The Sport Dog and the Sit Means Sit bricks cannot be recharged on the multi-brand
compatible extender. They must be removed from the extender for charging.
DIFFERENCES BETWEEN THE CHAMELEON® EXTENDER MULTI -
BRAND COMPATIBLE (CEMB®) AND THE CHAMELEON®
EXTENDER MARTIN SYSTEMS COMPATIBLE
The Chameleon®
Extender Multi
Brand
Compatible
CEMB®
Size
Large
For the dog to feel something
there must be at least one
contact point in a negative
island and one contact in a
positive island. Islands that
are mirror images of each
other or adjacent to each
other make up a positive and