Chamberlain RGAIPI User Manual

®

Model RGAIPI

Wireless Gate Access Intercom

Overview

The Wireless Gate Access Intercom allows
homeowners to communicate with guests at the gate
and operate the gate from inside the house. The
Indoor Intercom emits a doorbell sound and
establishes a secure 900 Mhz digital radio link with
the Outdoor Intercom. The Wireless Gate Access
Intercom is compatible with various Chamberlain
Wireless Products and all Chamberlain Gate
Operators.

Carton Inventory

Rubber Pads

Indoor Intercom

Mounting Tape

Talk Button: Following the ringing
of the doorbell by a guest, press
and hold the Talk button to talk to
the guest. Once the link to the
Outdoor Intercom is made, any
other intercoms in the network
cannot hear the conversation.
Select Button: During a conversation, the Select
button can be pressed to open the gate. A beep will
be heard and the gate will open. To open the gate
when not in a conversation, press and hold the Select
Button for 10 seconds.
Volume: Pressing the Volume
button repeatedly will cycle through
volume levels.
Battery: The AA Alkaline batteries
(not provided) will last up to a year
depending on use (Lithium batteries
recommended for colder
environments). When batteries are
low intercom will emit two beeps
every ten minutes.
An AC Adapter (not provided) can
also be used to power the
intercom. In this case, both the
power and channel lights will

OPTIONAL

remain on.

Outdoor Intercom

Alcohol Wipe

Outdoor Intercom

Operation & Features

Indoor Intercom

Volume Button

Talk
(Power - On)

Select Button

AC Adapter

Learn Button

On/Off: To turn Indoor Intercom ON, press any
button. To turn Indoor Intercom OFF, hold down the
Volume button for 5 seconds.

Dipswitch #1
Dipswitch #2

Call Button

Learn Button
Dipswitch
Block

Speaker

Call Button: To communicate with the Indoor
Intercom, press and release the Call button. A
doorbell sound will be heard on the Indoor Intercom.
Once a secure link is made, the Call button on the
Outdoor Intercom does not need to be pressed to
speak again.
Battery: The AA Alkaline batteries (not provided) will
last up to a year depending on use. (Lithium batteries
recommended for colder environments.)
Volume: To increase the Outdoor Intercom volume,
set Dipswitch #4 to OFF.
Sensitivity: To increase sensitivity on
the Outdoor Intercom set Dipswitch #3
to OFF.

NOTE: Dipswitch #1 must always
remain ON. Dipswitch #2 is not used.

1

Assemble

Indoor Intercom

Step 1: Install 4 AA Alkaline batteries (not provided).

(Lithium batteries recommended for colder
environments.)

Program Indoor Intercom to Outdoor Intercom

Step 1: Press the Learn
button on the Indoor Intercom
until a beep is heard.

Step 2: Within 10 seconds
press the Learn button on the
Outdoor Intercom until a
multi-beep is heard.

NOTE: The Indoor Intercom
will beep for approximately 30
seconds indicating that
programming is successful.
To stop the beeps earlier,
press the Select Button on the
Indoor Intercom.

Step 2: Adhere rubber pads to bottom.
Repeat Steps 1 and 2 for any additional intercoms.

Outdoor Intercom

Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)

Program Outdoor Intercom to Gate Operator

Refer to the owner's manual of the gate operator to
find the location of the Learn button.

Step 1: Press the Learn button on the gate operator.

Step 2: Within 10 seconds

press and hold the Learn
button on the Outdoor
Intercom until a beep is heard.

2