Important - Please read these instructions fully before starting assembly and using.
These instructions contain important information that will help you get the best from your grass
trimmer, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline on 01904 727503
prior to returning product to store.
Safety Information .............................................................................................................................................3
Parts list .............................................................................................................................................................8
Maintenance and Storage...............................................................................................................................13
Recycling and Disposal....................................................................................................................................17
Thank you for purchasing a CHALLENGE grass trimmer.
We would you like to be completely satised with your new product and hope you will enjoy using this tool for
many years.
Your CHALLENGE Grass Trimmer has been designed for cutting grass and similar soft vegetation in private
and hobby garden areas which are not accessible with a grass trimmer.
The device is not allowed to be used in public gardens, parks, sports centers or at roadsides as well as
agriculture and forestry.
Safety Information
Important - Please read these instructions fully before starting assembly
General Power Tool Safety Warnings
Read all instructions. Failure to follow all instructions listed below may result in electric shock, re
and/or serious injury. The term “power tool” in all warnings listed below refers to your mains operated
power tool.
1. Read the instruction carefully. Be familiar with the controls and the proper use of the appliance.
Read and understand the operator’s manual and observe the warnings and instruction labels
afxed to the appliance.
2. Users. Never allow children or people unfamiliar with these instructions to use the appliance. Local
regulations may restrict the age of operator. Never operate the tool under the inuence of alcohol,
medication or drugs.
3. Use appropriate tool. This device is only intended for cutting grass and soft vegetation outdoors
and only designated for use on private property. Do not force small tools or attachments to do the
job of a heavy duty tool.
4. Keep work areas clean. Cluttered areas can cause accidents.
5. Consider work area environment. Do not expose your tool to high humidity or rain. Do not use
your tool in damp and wet conditions.
Keep the work area well lit. Do not use your tool where there is a risk of causing re or explosion,
e.g. in the presence of ammable liquids and gases.
6. Keep all bystanders, children, and pets away. The operator or user is responsible for accidents or
hazards occurring to other people or the property.
7. Dress appropriately. Do not wear loose clothing or jewelry, as these can be caught in moving
parts. Preferably wear non-slip footwear when working outdoors. Wear protective hair covering to
keep long hair out of the way.
8. Head protection. Always use safety glasses and gloves. Use a face or dust mask whenever the
operations may produce dust or ying particles. Wear ear protection whenever the sound level
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
3
4
Safety Information
Important - Please read these instructions fully before starting assembly
General Power Tool Safety Warnings
seems uncomfortable.
9. Do not overreach. Keep proper footing and balance at all times.
10. Stay alert, watch what you are doing. Use common sense when operating the appliance. Do not
operate the tool when you are tired.
11. Grip the tool securely. Operator should one hand on the main handle, the other on the front
handle. Keep nger off trigger until ready to use.
12. Remove adjusting keys and wrenches. Always check that adjusting keys and wrenches are
removed from the tool before operating the tool.
13. Risk of cut. Do not touch or try to stop the cutting lines when they are moving.
14. Disconnect the plug. Disconnect plug from the tool when not in use or when servicing or cleaning.
15. Check for damaged parts. Before further use, carefully check the tool for damage.
Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other condition that may affect its operation. Do not use the tool if any parts are damaged or
defective. Have any damaged or defective parts repaired or replaced by an authorized service
agent. Never attempt any repairs yourself.
16. Avoid unintentional starting. Do not carry the tool without disconnect the plug and be sure the tool
is switched off.
17. Use an extension cord suitable for outdoor use when operating a power tool outdoors. Use a cord
suitable for outdoor use reduces the risk of electric shocks.
18. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
19. Store idle tools. When not in use, tools should be stored in a dry, locked-up place out of reach of
children.
20. Maintain tools with care. Keep tools clean and in good condition for better and safer performance.
Follow the instructions for maintenance and changing accessories. Keep handles and switches
dry, clean and free from oil and grease.
21. Have your tool repaired by an authorized service agent. This tool is manufactured in accordance
with the relevant safety regulations. To avoid danger, electrical appliances must only be repaired
by qualied technicians.
WARNING!
Do not use any attachments or accessories not recommended by the manufacturer of this tool.
The use of attachments or accessories not recommended can result in serious personal injury.
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
Safety Information
Important - Please read these instructions fully before starting assembly
Additional safety warnings for your grass trimmer
1. Wear protective glasses or goggles;
2. Never allow children or people unfamiliar with the instructions to use the machine;
3. Stop using the machine while people, especially children, or pets are nearby;
4. Only use the machine in daylight or good articial light;
5. Before using the machine and after any impact, check for signs of wear or damage and repair
as necessary;
6. Never operate the machine with damaged guards or without the guards in place;
7. Keep hands and feet away from the cutting means at all times and especially;
8. Take care against injury form any device tted for trimming the lament line length. After
extending new cutter line always return the machine to its normal operating position before
switching on;
9. Never t metal cutting elements;
10. Never use replacement parts or accessories not provided or recommended by the
manufacturer;
11. Always ensure that ventilation openings are kept clear of debris;
Electrical safety
WARNING!
Read these safety instructions thoroughly before connecting this product to the mains supply.
1. Before switching on, make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate. This product is designed to operate on 230-240VAC 50Hz.
Connecting it to any other power source may cause damage.
2. This product may be tted with a non-rewireable plug. If it is necessary to change the fuse in
the plug, the fuse cover must be retted. If the fuse cover becomes lost or damaged, the plug
must not be used until a suitable replacement is obtained.
If the plug has to be changed because it is not suitable for your socket, or due to damage, it
should be cut off and a replacement tted, following the wiring instructions shown below.
The old plug must be disposed of safely, as insertion into a 13 amp socket could cause an
electrical hazard.
WARNING!
A 13amp fuse must be tted. The use of a high sensitivity residual current device (RCD) is
recommended to provide personal protection against harmful electric current.
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
5
6
Safety Information
Electrical safety
WARNING!
Do not use two-core extension cords or reels on power tools with an earth path.
3. Use only extension cords suitable for outdoor use, preferably with a high visibility cable colour.
Always unwind all extension cables fully, coiled cables can overheat and reduce the efciency of
your product.
Warning Symbols
For extension cables up to 15metres , use a wire cross section of 1.5mm2. For extension cables
over 15 meters but less than 40 meters, use a wire cross section of 2.5 mm2.
If the insulation on a power cable or extension lead is found to be cut or damaged, do not touch it!
Disconnect the power supply immediately and have the damaged cable replaced.
Do not repair damaged cables.
Always follow the manufacture’s instructions.
Before any use, refer to the corresponding paragraph in the present manual.
Warning! This symbol, before a safety comment, indicates a precaution, a warning or a danger.
Ignoring this warning can lead to an accident for yourself or for others. To limit the risk of injury,
re, or electrocution always apply the recommendations indicated.
Wear ear protection.
Wear eye protection.
Wear dust mark.
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
Loading...
+ 13 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.