Challenge GT5614 Instruction manual
CHALLENGE
Hand push cylinder mower
Original Manual
GT5614
Important - Please read these instructions fully before starting assembly.
These instructions contain important information that will help you get the best from your
lawnmower, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline on 01904 727508
prior to returning product to store.
Aug 2017 Rev B
Contents
Introduction ......................................................................................................................................................3
Safety Information .............................................................................................................................................3
Parts list .............................................................................................................................................................7
Assembly...........................................................................................................................................................8
Operation.........................................................................................................................................................9
Maintenance and Storage...............................................................................................................................10
Troubleshooting...............................................................................................................................................14
Technical Data.................................................................................................................................................15
Recycling and Disposal....................................................................................................................................15
Guarantee........................................................................................................................................................16
2
Customer Helpline 01904 727508
www.coreservice.co.uk
Introduction
Thank you for purchasing a CHALLENGE lawnmower
We would you like to be completely satised with your new product and hope you will enjoy using this tool for
many years.
Your CHALLENGE hedge trimmer has been designed for trimming light foliage and is intend for DIY use only.
The device is not allowed to be used in public gardens, parks, sports centers or at roadsides as well as
agriculture and forestry.
Safety Information
Important - Please read these instructions fully before starting assembly
Training
1. Never allow children or people unfamiliar with these instructions to us the
mower. Local regulation can restrict the age of the operator
2. Never mow while people, especially children, or pets are nearby.
3. Keep in mind that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
Preparation
1. While mowing, always wear substantial footwear and long trousers. Do not
operate the mower when barefoot or wearing open sandals.
2. Thoroughly inspect the area where the equipment is to be used and remove
all objects which can be thrown by the machine.
3. Before using, always visually inspect to see that the blades, blade bolts and
cutter assembly are not worn or damaged. Replace worn or damaged blades
and bolts in sets to preserve balance.
Operation
1. Mow only in daylight or in good articial light.
2. Always be sure of your footing on the slopes.
3. Walk, never run.
4. Exercise extreme caution when changing direction on slopes.
5. Do not mow excessively steep slopes.
6. Use extreme caution when reversing or pulling the mower towards you.
7. Stop the blades if the mower has to be tilted for transportation when crossing
surfaces other than grass, and when transporting the mower to and from the
area to be mowed.
Customer Helpline 01904 727508
www.coreservice.co.uk
3
4
Important - Please read these instructions fully before starting assembly
Operation （continued）
Maintenance
Safety Information
9. Never operate the mower with defective guards, or without safety devices, for
example deectors and/or grass catchers, in place.
10. Do not put hands or feet near rotating parts while the mower is being
operated.
1. Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition.
2. Check the grass catcher frequently for wear or deterioration.
3. Replace worn or damaged parts for safety.
4. Be careful during adjustment of the mower to prevent entrapment of the
ngers between moving blades and xed parts of the mower.
Caution! Do not touch rotating blade.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2. Keep children and bystanders away while operating the mower. Distractions
can cause you to lose control.
Personal safety
1. Use common sense when operating the tools. Do not use this mower while
you are tired or under the inuence of drugs, alcohol or medication.
A moment of inattention while operating this mower may result in serious
personal injury.
2. Use personal protective equipment. Always wear eye protection and non-skid
safety shoes.
3. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the mower in unexpected situations.
4. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
Customer Helpline 01904 727508
www.coreservice.co.uk
Important - Please read these instructions fully before operation or maintainance
Use and care
Safety Information
1. Do not force the machine. Use the correct machine for your application.
The correct machine will do the job better and safer at the rate for which it was
designed.
2. Do not use the machine if any parts of the machine is damaged or broken.
Any machine that is damaged or broken is dangerous and must be repaired.
3. Store idle machine out of the reach of children and do not allow person
unfamiliar with the machine or these instructions to operate the machine.
This machine is dangerous in the hands of untrained users.
4. Maintain the machine. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the machine’s
operation. If damaged, have the machine repaired before use. Many accidents
are caused by poorly maintained machine.
5. Keep cylinder blades sharp and clean. Properly maintained cutting blades
with sharp cutting edges are less likely to bind and are easier to control.
Customer Helpline 01904 727508
www.coreservice.co.uk
5
Loading...