Challenge 265, 193, 305 User Manual

The

Challenge Machinery Company provides owner's

manuals on its products solely as a courtesy to its customers. See the informati on belo w b efore us ing thi s ma nu al .

These manuals are for reference only. These manuals include products which are noncurrent, unsupported or no longer produced by The Challenge Machinery Compa ny, and are provided solely as an accomodation to our customers. By providing these manuals, The Challenge Machinery Company makes no representation or warranty as to the products, their current condition, or their suitability or fitness for use in any particular application, which are the sole and indepe nde nt res pon si bility of the product ow ner a nd user.

Older products may not comply with current safety procedures, guidelines or regulations, and it is the product owner's and user's responsibility to evaluate the suitability and fitness of the products in their current use and application. The Challenge Machinery Company makes no representation, warranty or recommendation regarding any modifications which may be required on non-current or unsupported products. The Challenge Machinery Company assumes no liability for any modification or alteration to any Challenge product, and any such modification or alteration to any Challenge product is not authorized by The Challenge Machinery Company. The availability of these manuals is solely for the purpose of providing

reference information for the products.

This

products should be used only by qualified and properly trained personnel, following proper safety procedures. All products should be regularly inspected and maintained, and their condition,

application and use should be periodically evaluated by qualified personnel. Only qualified and properly trained technicians should perform maintenance, procedures. Attempting these procedures without proper training damage or

Products unavailability available the pro duct does n ot have a U L label it is not a list ed product ), and m ay not compl y with applicable installation or other regulations or requirements if Many

to them. Often the cost of updating an older product to comply with current safety regulations is greater than the value of the product.

manual

municipalities require a product

may not be

operator

may be

of parts from their

to repair or

injury!

unsupported by The Challenge Machinery Company

maintain unsupported

complete

original manufacturer.

in all aspects of

products.

to be UL

listed

product

No parts or

Older

before

maintenance

products

repair

may

product support may not be UL

relocated

electrician

and

repair.

and replacement

cause

due to age or the

to a new

will

connect

All

machine

will be

listed (if

facility.

power