Chainway H100 User Manual

ShenZ

hen Chainway Information Technology Co.,L

td

Smart Healthcare

Handheld Terminal

H100 User Manual

1

Contents

Statement ............................................................................................ 3

Chapter 1 Product Intro ....................................................................... 5

1.1 Product Intro........................................................................... 5

1.2 Precautions before using battery ........................................... 7

Chapter 2 Installation instructions ....................................................... 8

2.1 Appearance ................................................................................ 8

2.2 Install TF card and SIM card .................................................... 10

2.3 Battery charge .......................................................................... 11

2.4 Power button ............................................................................ 11

Chapter 3 Telephone function ........................................................... 12

3.1 Dial numbers ............................................................................ 12

3.2 Contacts ................................................................................... 13

3.3 SMS and MMS ..................................................................... 14

Chapter 4 Barcode reader ................................................................. 15

Chapter 5 NFC ................................................................................... 17

Chapter 6 Pupil scanning lamp ......................................................... 18

Chapter 7 Fingerprint identification ................................................... 19

Chapter 8 Other functions ................................................................. 23

8.1 PING tool .................................................................................. 23

8.2 Bluetooth .................................................................................. 24

8.3 GPS .......................................................................................... 26

8.4 Volume setup ........................................................................... 27

8.5 Sensor ...................................................................................... 28

8.6 Keyboard(optional) ................................................................... 29

8.7 Network .................................................................................... 30

Chapter 9 Device specification .......................................................... 31

2

3

Statement

2013 by ShenZhen Chainway Information Technology Co., Ltd. All
rights reserved.

No part of this publication may be reproduced or used in any form, or
by any electrical or mechanical means, without permission written
from Chainway. This includes electronic or mechanical means, such
as photocopying, recording, or information storage and retrieval
systems. The material in this manual is subject to change without
notice.

The software is provided strictly on an “as is” basis. All software,
including firmware, furnished to the user is on a licensed basis.
Chainway grants to the user a non-transferable and non-exclusive
license to use each software or firmware program delivered
hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the
user without prior written consent of Chainway. No right to copy a
licensed program in whole or in part is granted, except as permitted
under copyright law. The user shall not modify, merge, or incorporate
any form or portion of a licensed program with other program material,
create a derivative work from a licensed program, or use a licensed
program in a network without written permission from Chainway.

Chainway reserves the right to make changes to any software or
product to improve reliability, function, or design.

Chainway does not assume any product liability arising out of, or in
connection with, the application or use of any product, circuit, or
application described herein.

No license is granted, either expressly or by implication, estoppel, or
otherwise under any Chainway intellectual property rights. An implied
license only exists for equipment, circuits, and subsystems contained
in Chainway products.

4

5

Chapter 1 Product Intro

1.1 Product Intro

H100 is the smart handheld terminal that introduced by Chainway,
which is specially designed for healthcare industry. H100 is an
Android 6.0 mobile computer, it is ultra-thin and pocketable enough to
satisfy all healthcare providers. Both patient and staff information can
be collected automatically with 1D/2D barcode scanning, NFC,
fingerprint recognition, and camera, or be synchronized to the
hospital backend system with real-time network connectivity.

H100 will not only provide better healthcare services to medical staffs
and patients, but also it will be in favor of upgrading management
works of hospital.

H100 is specially designed for healthcare industry, its integrated
design makes it with features such as ultra-thin, awesome holding
and exquisite. The housing is also specially designed for medical
industry so that it can be sterilized by alcohol. Meanwhile, it is
integrated with pupil scanning lamp that makes it convenient for
medical staff to check vital signs of patients.

This device is integrated with best-in-class Zebra 2D barcode
scanning engine which make it accurate and fast to identify various
1D/2D codes. For the image collection functional purposes, H100 is
also integrated with 1.3M high-resolution auto-focus camera and NFC
communication technology.

H100 adopts 5 inch high-resolution (1920*1080) screen. Its rugged
capacitive touch panel supports operation with wet hands or gloves,
which is often the case in healthcare steps. It integrated with precise
fingerprint identification module to verify fingerprint to gain access to
PDA and prevent patients’ information leakage in effective way.
Alternatively, it will avoid data distribution in case of device missing.

6

This device can fully support fast 4G LTE network connectivity which
makes it easy for mobile working, it configured with WIFI wireless
connection to facilitate data transfer more stable. Meanwhile, H100
also support Bluetooth, it can connect various Bluetooth devices that
accords to its communication protocol.

7

1.2 Precautions before using battery

 Do not leave battery unused for long time, no matter it is in

device or inventory. If battery has been used for 6 months
already, it should be check for charging function or it should be
disposed correctly.

 The lifespan of Li-ion battery is around 2 to 3 years, it can be

circularly charged for 300 to 500 times. (One full battery charge
period means completely charged and completely discharged.)

 The lifespan of chargeable battery is limited and it will lose its

charge retention regularly. This loss is irrevocable. When
battery lost its capacity, the lifespan would be cut.

 When Li-ion battery is not in used, it will continue discharge

slowly. Therefore, battery charging status should be checked
frequently and take reference of the related battery charging
information on the manuals.

 Observe and record the information of a new unused and non-

fully charged battery. On the basis of operating time of new
battery and compare with a battery that has been used for long
time. According to product configuration and application
program, the operating time of battery would be different.

 Check battery charging status at regular intervals.
 When battery operating time drops below about 80%, charging

time will be increased remarkably.

 If a battery is stored or otherwise unused for an extended

period, be sure to follow the storage instructions in this
document. If you do not follow the instructions, and the battery
has no charge remaining when you check it, consider it to be
damaged. Do not attempt to recharge it or to use it. Replace it
with a new battery.

 Store the battery at temperatures between 5 °C and 20 °C

(41 °F and 68 °F).

8

Chapter 2 Installation instructions

2.1 Appearance

H100 back and front appearances are showing as follows:

9

10

2.2 Install TF card and SIM card

Use the ejector pin to open the cover from back side, SIM card socket
and TF card socket can be found in following picture:

11

2.3 Battery charge

By using USB Type-C contact, the original adaptor should be used for
charging the device. Make sure not to use other adaptors to charge
the device.

2.4 Power button

Switching-on or switching-off function can be executed by long press
power button on the right for 3 seconds. Short press power button
can start on or stand by the device.

12

Chapter 3 Telephone function

3.1 Dial numbers

1. Click the icon on desktop .

2. Click number key to input phonenumber.

3. Click to dial.

13

3.2 Contacts

1. Click icon on desktop to open contacts list.

2. Click icon to add new contact.

3. Click on the right top to import/export contacts.

14

3.3 SMS and MMS

1. Click icon to open message window.

2. Click to input message receiver and content.

3. Click to send message.

15

Chapter 4 Barcode reader

1. In the application App center to open “2D(S)”.

2. Click the key “Scan” or scanning button to start scanning. And
the parameter auto interval can be set also.

16

Caution: Please scan codes in correct way otherwise the

scanning will be failed.

1D barcode:

2D code:

17

Chapter 5 NFC

1. In App Center to click icon NFC to read and write information.

18

Chapter 6 Pupil scanning lamp

Switch on the device and press button on left side to turn on pupil
scanning lamp.

19

Chapter 7 Fingerprint identification

1. Click icon “Setting” to enter system setup.

2. Click “Security”.

3. Click “Fingerprint” to enter fingerprint setup option.

20

Click “CONTINUE” to setup.

4. Click “SET UP SCREEN LOCK” to continue setting up.

5. Setup spare screen unlock method to unlock without using
fingerprint. Pattern, PIN code and password can be selected for
different setup.

21

6. After setting up spare unlock method, we should continue to
setup fingerprint unlock. After find out fingerprint sensor, click
“NEXT”.

7. Entering fingerprint according to instructions and this process
will be repeated for a few times.

22

8. If multiple fingerprints are needed, then click “ ADD ANOTHER”
to enter other fingerprints, otherwise clicking “DONE”.

9. After this, the screen can be unlocked by fingerprint.

23

Chapter 8 Other functions

8.1 PING tool

1. In App Center, open “Ping” for test.

2. Setup PING parameter and select external/internal address.

24

8.2 Bluetooth

1. In App Center, open “BT Printer” for test.

2. In the list of device searching, click the device that you want to
connect to pair.

3. Select printer and click “Print” to start printing content.

25

26

8.3 GPS

1. In App Center, open “GPS” for positioning test.

2. Setup GPS parameter to access GPS data.

27

8.4 Volume setup

1. In App Center, open “Volume”

2. Setup the volume by requirements.

28

8.5 Sensor

1. In App Center, open “Sensor”.

2. Setup the sensor by requirements.

29

8.6 Keyboard(optional)

1. In App Center, open “Keyboard”.

2. Setup and test the main value of device.

30

8.7 Network

1. In App Center, open “Network”.

2. Test WIFI/Mobile network by requirements.

31

Chapter 9 Device specification

Physical characteristics

Size

154.8mm*73.8mm*14.5mm

/6.09*2.91*0.57in

Weight

227 g

/8.0oz

Display 5.0 Inch high-resolution, 1920*1080

Touch panel Power key, 2 scanning keys, multifunction key,

HOME key, TP key and menu key

Battery Internal battery(non-removable)

Extension

slot 2 micr

o SIM card slot, 1 TF card slot

Audio

Speaker, microphone, voice call

supported

Camera 1.3MP autofocus camera with flash light

Communication

Interface

USB2.0 Type-C

Pupil lamp Yellow LED light.

Sensor

Gravity sensor, light sensor, proximity sensor,

vibration motor

Performance

CPU

Cortex

-

A53 1.3GHz Quad

-

core.

OS Andriod 6.0

RAM

2GB RAM

ROM 16GB ROM

Expansion Supports up to 32 GB Micro SD card

32

Communication

WWAN

2G: 900/1800MHz

3G: 900/1900/2000/2100MHz

4G: TDD-LTE: B38, B39, B40, B41

FDD-LTE: B1, B3, B5

WLAN IEEE802.11 a/b/g/n (2.4G/5G dual band),

internal antenna

Bluetooth Bluetooth 4.0, BLE

User environment

Operating temp. -4°F to 122°F / -20°C to 50°C

Storage Temp. -40°F to 158°F / -40°C to 70°C

Humidity 5% RH - 95% RH non condensing

Sealing

IP65

Drop specification

Multiple 1.5m/4.9ft drops to the concrete across

the operating temperature range

Data collection

Scan engine

Zebra SE4710

NFC

13.56MHz,

ISO/IEC 18092 (ECMA 340) /

ISO/IEC 21481 (ECMA 352)

Fingerprint Capacitive Sensor

Developing environment

SDK Chainway software development kit

Language Java

Tool Eclipse/Android Studio