Page 1
Mobile Data Terminal
C76 User Manual
Page 2
目录
Chapter 1 Product Intro
..............................................................................................
1.1 Intro................................................................................................................. 2
1.2 Precaution before using battery................................................................. 2
1.3 Charger...........................................................................................................4
1.4 Notes
Chapter 2 Installation Guide
2.1 Appearance
...............................................................................................................
......................................................................................
....................................................................................................
2.2 Install Micro SD,cards.................................................................................. 7
2.3 Battery Charging........................................................................................... 7
2.4 Buttons and Function Area..........................................................................8
Chapter 3 Barcode reader-writer
Chapter 4 RFID reader
4.1 UHF
...............................................................................................................
.............................................................................................
..............................................................................
11
11
Chapter 5 Other functions........................................................................................13
5.1 PING tool..................................................................................................... 13
5.2 Bluetooth......................................................................................................14
5.3 GPS
5.4 Volume setup
5.5 Sensor
..............................................................................................................
...............................................................................................
..........................................................................................................
15
16
17
5.6 Keyboard......................................................................................................18
5.7 Network........................................................................................................ 19
Chapter 6 Device characteristic.............................................................................. 20
2
5
6
6
9
1
Page 3
Chapter 1 Product Intro
1.1 Intro
1.2 Precaution before using battery
Do not leave battery unused for long time, no matter it is in device or
The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly
When Li-ion battery is not in used, it will continue discharge slowly.
Observe and record the information of a new unused and non-fully
Check battery charging status at regular intervals.
C76 device is a smart mobile PDA that integrated with various features such as
UHF,, data acquisition, wireless transmission and data processing etc. It is
configured with Andriod 6.0 OS and it possesses high reliability and
expansibility. With a set of advanced data acquisition options, C76 can be
operated in various industries to acquire precise and abundant datum
automatically. Meanwhile, the device can match the options with staffs
accordingly. The corporation which deployed C76 will realize the deployment
work is simple and maintenance work will be remarkably decreased.
C76 is highly rugged, compact and durable. With IP65 water and dust proof
capability, the device has met IEC sealing standard. Therefore, it can be
operated by staffs such as railway inspector, road toll operator, vehicle
inspector, delivery postman, power supply inspector, storage administrator,
financial & insurance, police officers, security tracing etc. Wherever your staff’
locations are, C76 can remain its connectivity with the system to make sure
business in high-effective operating.
inventory. If battery has been used for 6 months already, it should be check
for charging function or it should be disposed correctly.
charged for 300 to 500 times. (One full battery charge period means
completely charged and completely discharged.)
Therefore, battery charging status should be checked frequently and take
reference of the related battery charging information on the manuals.
charged battery. On the basis of operating time of new battery and
compare with a battery that has been used for long time. According to
product configuration and application program, the operating time of
battery would be different.
2
Page 4
When battery operating time drops below about 80%, charging time will be
increased remarkably.
If a battery is stored or otherwise unused for an extended period, be sure
Store the battery at temperatures between 5 °C and 20 °C (41 °F and
to follow the storage instructions in this document. If you do not follow the
instructions, and the battery has no charge remaining when you check it,
consider it to be damaged. Do not attempt to recharge it or to use it.
Replace it with a new battery.
68 °F).
3
Page 5
1.3 Charger
The charger type is GME10D-050200FGu,output voltage/current is 5V DC/2A.
The plug considered as disconnect device of adapter.
4
Page 6
1.4 Notes
Note:
Using the incorrect type battery has danger of explosion.
Please dispose the used battery according to instructions.
Note:
Due to the used enclosure material, the product shall only be connected
to a USB Interface of version 2.0 or higher. The connection to so called
power USB is prohibited.
Note:
The adapter shall be installed near the equipment and shall be easily
accessible.
Note:
The suitable temperature for the product and accessories is 0-10℃ to
50℃.
Note:
CAUTION RISK OF EXPLOSION IF BATTERY ISREPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING
TO THEINSTRUCTIONS.
5
Page 7
Chapter 2 Installation Guide
2.1 Appearance
6
Page 8
2.2 Install Micro SD,cards
2.3 Battery Charging
By using USB Type-C contact, the original adaptor should be used for charging
the device. Make sure not to use other adaptors to charge the device.
7
Page 9
2.4 Buttons and Function Area
Button
Description
Side
button
1.Power
Located on left side, press to ON/OFF device.
2.Function key
Located on left side, its function can be defined by software.
3.SCAN
Scanning button located on both sides. There are two scanning buttons.
Main
button
4.Menu
Display main menu.
5.Home
Touch it back to main screen.
6.Enter
Press to confirm current selection.
7.Backspace
Return to last step to setup.
POWER
Function Key
SCAN
Main Button
C72 has 4 side buttons and 4 main keys, handheld connection port locates at
rear, 2D scanning module and camera locate at top.
Buttons instruction
8
Page 10
Chapter 3 Barcode reader-writer
1. In App Center, to open 2D barcode scan test.
2. Press “SCAN” button or click scan key to start scanning, the parameter
Caution: Please scan codes in correct way otherwise the scanning will
“Auto interval” can be adjusted.
be failed.
1D barcode:
2D code:
9
Page 11
Max. radiant power: 0.6mW
Wave length: 655nM
IEC 62471-1 (Ed.2.0).
21CFR 1040.10 and 1040.11 standard.
10
Page 12
Chapter 4 RFID reader
4.1 UHF
Click App Center, open “UHF” to scan, read and write tag information, also kill
and lock tags.
11
Page 13
12
Page 14
Chapter 5 Other functions
1. Open “PING” in App Center.
2. Setup PING parameter and select external/internal address.
5.1 PING tool
13
Page 15
5.2 Bluetooth
1. Open “BT Printer” in App Center.
2. In the list of detected devices, click the device that you want to pair.
3. Select printer and click “Print” to start printing contents.
14
Page 16
5.3 GPS
1. Click “GPS” in App Center to open GPS test.
2. Setup GPS parameters to access GPS information.
15
Page 17
5.4 Volume setup
1. Click “Volume” in App Center.
2. Setup volume by requirements.
16
Page 18
5.5 Sensor
1. Click “Sensor” in App Center.
2. Setup the sensor by requirements.
17
Page 19
5.6 Keyboard
1. Click “Keyboard” in App Center.
2. Setup and test the main value of the device.
18
Page 20
5.7 Network
1. Click “Network” in App Center.
2. Test WIFI/Mobile signal by requirements.
19
Page 21
Chapter 6 Device characteristic
Size
162.5mm*80.0mm*14.5mm
Weight
540g
Display
5.2 inch，IPS FHD 1920*1080P
Touch panel
4 main keyboards, 1 power button, 2 scan buttons, 1
multi-function button
Battery
Li-ion, rechargeable, 6600mAh
(4000mAh embedded battery and 2600mAh pistol battery)
Expansion
Supports up to 32 GB Micro SD card
Expansion Slot
1 slot for SIM card, 1 slot for SIM or TF card
Audio
Speaker, microphone
Camera
13MP autofocus camera with flashlight
CPU
Cortex-A53 Quad-core 1.3GHz
OS
Andriod 6.0
RAM
2GB RAM
Communication
Interface
USB2.0,Type-C
ROM
16GB
Max.expansion
Supports up to 32 GB Micro SD card
Operating temp.
-20℃ to 50℃
Storage Temp.
-
20℃ to 70℃
Humidity
5%RH - 95%RH non condensing
Sealing
IP65, IEC sealing standard
Drop
specification
Multiple 1.5m/4.9ft drops (at least 20 times) to the concrete
across the operating temperature range
Physical characteristics
Performance
User environment
20
Page 22
Communication
WLAN
IEEE802.11 a/b/g/n, 2.4G/5G dual-band, internal
antenna
WPAN
Bluetooth 4.0
Barcode scanning
2D CMOS scanning engine
RFID
UHF
SDK
Chainway software develop kit
Language
Java
Develop
Eclipse/Android Studio
Data collection
Developing Environment
21
Page 23
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
The device is designed to meet the requirements for exposure to radio waves
established by the Federal Communications Commission (USA). These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported under this standard during product
certification for using at the handheld is 0.653 W/kg.
22
Page 24
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
23
Loading...