Chainway C66 User Manual

SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD

Mobile Data Terminal

C66 User Manual

1

Content

Content ......................................................................................... 1

Statement ......................................................................................... 3

Chapter 1 Product intro ..................................................................... 5

1.1 Intro .................................................................................... 5

1.2 Precaution before using battery ........................................... 6

1.3 Charger ................................................................ ............... 7

1.4 Notes .................................................................................. 8

Chapter 2 Installation instructions ..................................................... 9

2.1 Appearance ............................................................................. 9

2.2 Install Micro SD and SIM cards .............................................. 10

2.3 Battery charge ....................................................................... 11

2.4 Buttons and function area display .......................................... 12

Chapter 3 Call function ................................................................... 13

3.1 Calling numbers .................................................................... 13

3.2 Contacts ................................................................................ 13

3.3 SMS and MMS ................................................................ ...... 13

Chapter 4 Barcode reader-writer ..................................................... 14

Chapter 5 RFID reader ................................................................... 16

5.1 NFC....................................................................................... 16

Chapter 6 Other functions ................................ ............................... 17

6.1 PING tool............................................................................... 17

6.2 Bluetooth ............................................................................... 18

6.3 GPS ...................................................................................... 19

6.4 Volume setup ........................................................................ 20

6.5 Sensor ................................................................................... 21

2

6.6 Keyboard ............................................................................... 22

6.7 Network ................................................................................. 23

6.8 Keyboard emulator ................................................................ 24

Chapter 7 Device characteristic ...................................................... 25

3

Statement

2013 by ShenZhen Chainway Information Technology Co., Ltd. All
rights reserved.

No part of this publication may be reproduced or used in any form, or
by any electrical or mechanical means, without permission written
from Chainway. This includes electronic or mechanical means, such
as photocopying, recording, or information storage and retrieval
systems. The material in this manual is subject to change without
notice.

The software is provided strictly on an “as is” basis. All software,

including firmware, furnished to the user is on a licensed basis.
Chainway grants to the user a non-transferable and non-exclusive
license to use each software or firmware program delivered
hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the
user without prior written consent of Chainway. No right to copy a
licensed program in whole or in part is granted, except as permitted
under copyright law. The user shall not modify, merge, or incorporate
any form or portion of a licensed program with other program material,
create a derivative work from a licensed program, or use a licensed
program in a network without written permission from Chainway.

Chainway reserves the right to make changes to any software or
product to improve reliability, function, or design.

Chainway does not assume any product liability arising out of, or in
connection with, the application or use of any product, circuit, or
application described herein.

No license is granted, either expressly or by implication, estoppel, or
otherwise under any Chainway intellectual property rights. An implied
license only exists for equipment, circuits, and subsystems contained
in Chainway products.

4

5

Chapter 1 Product intro

1.1 Intro

C66 is an industrial-grade smart handheld terminal that has been
designed and manufactured by Shenzhen Chainway information
technology co, ltd .It is based on Android 7.1 / Android 9.0, which
runs fast and has a long battery life. To meet the needs of multi­industry applications like logistics express, warehouse inventory,
manufacturing, retail, etc., It can help customers to quickly access
information and improve the efficiency of outbound storage inventory

6

1.2 Precaution before using battery

 Do not leave battery unused for long time, no matter it is in

device or inventory. If battery has been used for 6 months
already, it should be check for charging function or it should be
disposed correctly.

 The lifespan of Li-ion battery is around 2 to 3 years, it can be

circularly charged for 300 to 500 times. (One full battery charge
period means completely charged and completely discharged.)

 When Li-ion battery is not in used, it will continue discharge

slowly. Therefore, battery charging status should be checked
frequently and take reference of the related battery charging
information on the manuals.

 Observe and record the information of a new unused and non-

fully charged battery. On the basis of operating time of new
battery and compare with a battery that has been used for long
time. According to product configuration and application
program, the operating time of battery would be different.

 Check battery charging status at regular intervals.
 When battery operating time drops below about 80%, charging

time will be increased remarkably.

 If a battery is stored or otherwise unused for an extended

period, be sure to follow the storage instructions in this
document. If you do not follow the instructions, and the battery
has no charge remaining when you check it, consider it to be
damaged. Do not attempt to recharge it or to use it. Replace it
with a new battery.

 Store the battery at temperatures between 5 °C and 20 °C

(41 °F and 68 °F).

7

1.3 Charger

The charger output voltage/current is 9V DC/2A. The plug considered
as disconnect device of adapter.

8

1.4 Notes

Note:

Using the incorrect type battery has danger of explosion.
Please dispose the used battery according to instructions.

Note:
Due to the used enclosure material, the product shall only be
connected to a USB Interface of version 2.0 or higher. The
connection to so called power USB is prohibited.

Note:

The adapter shall be installed near the equipment and shall be easily
accessible.

Note:

The suitable temperature for the product and accessories is 0-10℃ to
50℃.

Note:

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.

9

Chapter 2 Installation instructions

2.1 Appearance

C66 back and front appearances are showing as follows:

10

Buttons instruction

Button

Description

Side

button

1. Power

Locate on right side, press to ON/OFF device.

2. PTT key

Locate on right side, its function can be defined by software.

3.SCAN

Scanning button located on both sides. There are two scanning
buttons.

4. Volume +/-

Volume up and down

2.2 Install Micro SD and SIM cards

The cards sockets are showing as follows:

11

2.3 Battery charge

By using USB Type-C contact, the original adaptor should be used for
charging the device. Make sure not to use other adaptors to charge
the device.

12

2.4 Buttons and function area display

C66 has 6 side buttons, 2D scanning module locates on the top. HD
camera and flashlight locate at rear. NFC identification surrounds the
camera.

13

Chapter 3 Call function

3.1 Calling numbers

1. Click icon .

2. Click number key to input phone numbers.

3. Click icon to call.

4. Click icon to end call.

3.2 Contacts

1. Click contacts to open contacts list.

2. Click icon to add new contacts.

3. Click icon to import/export contacts.

3.3 SMS and MMS

1. Click to open message window.

2. Click to input message receiver and contents.

3. Click to send out messages.

4. Click to add attachment pictures and videos.

14

Chapter 4 Barcode reader-writer

1. In App Center, to open 2D barcode scan test.

2. Press “SCAN” button or click scan key to start scanning, the
parameter “Auto interval” can be adjusted.

Caution: Please scan codes in correct way otherwise the

scanning will be failed.

2D code:

15

Max. radiant power: 0.6mW
Wave length: 655nM
IEC 60825-1 (Ed.2.0).
21CFR 1040.10 and 1040.11 standard.

16

Chapter 5 RFID reader

5.1 NFC

Click App Center, open “NFC” to read and write tag information.

17

Chapter 6 Other functions

6.1 PING tool

1. Open “PING” in App Center.

2. Setup PING parameter and select external/internal address.

18

6.2 Bluetooth

1. Open “BT Printer” in App Center.

2. In the list of detected devices, click the device that you want to
pair.

3. Select printer and click “Print” to start printing contents.

19

6.3 GPS

1. Click “GPS” in App Center to open GPS test.

2. Setup GPS parameters to access GPS information.

20

6.4 Volume setup

1. Click “Volume” in App Center.

2. Setup volume by requirements.

21

6.5 Sensor

1. Click “Sensor” in App Center.

2. Setup the sensor by requirements.

22

6.6 Keyboard

1. Click “Keyboard” in App Center.

2. Setup and test the main value of the device.

23

6.7 Network

1. Click “Network” in App Center.

2. Test WIFI/Mobile signal by requirements.

24

6.8 Keyboard emulator

The keyboard emulator can be used in multiple operating background
and output formats directly. And it includes Prefix/Suffix/Enter/TAB.

Please check Keyboard emulator manual for more details.

25

Chapter 7 Device characteristic

Physical characteristics

Size

160x76x15.5mm / 6.3*2.99*0.61in

Weight

＜287g/10.12oz(with battery)

Display

5.45-inch display, IPS LTPS 1440*720

Touch panel

Corning Gorilla Glass, multi-touch panel, gloves

and wet hands supported

Battery

4300mAh removable main battery, 5200mAh

optional pistol battery, support QC3.0 and RTC

Standby: over 300 hours (only main battery)

Continuous use: over 12 hours (depending on

user environment)

Charging time: 2.5hours (charge device by

standard adaptor and USB cable)

Expansion

Supports up to 128 GB Micro SD card

Expansion Slot

2 slot for SIM card, 1 slot for TF card

Audio

2 Microphones, 1 for noise reduction

Camera

13MP autofocus camera with flashlight

Performance

CPU

Qualcomm Octa-core 1.8GHz / 2.0GHz

OS

Android 9.0 / Android 7.1

RAM

2GB / 3GB

Communication

Interface

USB3.0,Type-C,OTG

ROM

16GB/32GB

Max. expansion

Supports up to 128 GB Micro SD card

26

User environment

Operating

temp.

-20℃ to 50℃

Storage Temp.

-40℃ to 70℃

Humidity

5%RH - 95%RH non condensing

Sealing

IP65, IEC sealing standard

Drop

specification

Multiple 1.5m/4.9ft drops (at least 20 times) to the

concrete across the operating temperature range

Multiple 2.4m/7.87ft drops (at least 20 times) to

the concrete after installed rubber bumper

Communication

WAN

EU/CH:

2G: 850/900/1800/1900MHz
3G: CDMA EVDO: BC0
WCDMA: 850/900/1900/2100MHz
TD-SCDMA: A/F(B34/B39)
4G: B1, B3, B5, B7, B8, B20, B38, B39, B40, B41

US:

2G: 850/900/1800/1900MHz
3G: 850/900/1900/2100MHz
4G: B2, B4, B5, B7, B12, B17, B38

WLAN

Support 802.11 a/b/g/n/ac

Bluetooth

Bluetooth 4.2/4.1+HS/4.0/3.0+HS/2.1+EDR

Data collection

Barcode

scanning

SE4710

RFID

NFC 13.56Mhz

27

Developing Environment

SDK

Chainway software develop kit

Language

Java

Develop

Eclipse/Android Studio

28