Handheld Mobile Computer
C6000 User Manual
CONTENS
Chapter 1 Brief Instruction ..............................................................................................4
1.1 Brief Instruction .........................................................................................................4
1.2 Precaution Before Using Battery ...............................................................................4
Chapter 2 Installation Guide ........................................................................................5
2.1 Appearance ...............................................................................................................5
2.2 Buttons .......................................................................................................................6
2.3 Micro SD、SIM、PSAM Card Installation .................................................................6
2.4 Battery Charging ........................................................................................................7
2.5 Device Turning on/off ................................................................................................7
Chapter 3 Call Function ...................................................................................................7
3.1 Phone .........................................................................................................................7
3.2 Contacts .....................................................................................................................8
3.3 Messaging ..................................................................................................................8
Chapter 4 Barcode Reader ..............................................................................................9
Chapter 5 RFID Reader ................................................................................................. 10
5.1 High Frequency ....................................................................................................... 10
5.1.1 14443A ................................................................................................................ 10
5.1.2 14443B ................................................................................................................ 10
5.1.3 15693 ................................................................................................................... 11
5.2 NFC ............................................................................................................................ 11
Chapter 6 The Other Functions .................................................................................... 12
6.1 PING ........................................................................................................................ 12
6.2 Bluetooth ................................................................................................................ 12
6.3 GPS.......................................................................................................................... 13
6.4 Volume Settings ...................................................................................................... 14
6. 5 Sensor .................................................................................................................... 14
6.6 Keyboard ................................................................................................................ 15
6.7 Network .................................................................................................................. 15
6.8 KeyboardEmulator .................................................................................................. 16
Chapter 7 Device Specifications ................................................................................... 16
Chapter 1 Brief Instruction
1.1 Brief Instruction
Chainway C6000 is a series of Android powered smart terminals, with data capture, data
processing, wireless communication. It is with high-reliability & high-expansibility. Auto &
Accurate data collection is achieved in various business fields via a complete solution of premium
options, the flexible solution among options and operators is suited-up. You will find out with
C6000, much easier deployment, reduced complexity, decreased maintenance, are the benefits
for enterprises.
C6000 meets industrial level IP65 (IEC sealing), is sufficient to routine applications, eg, railway
inspection, road parking toll, vehicle inspection, logistics express, power inspection, warehousing
management, chain retail, etc. Whether the mobile operators are working indoor or outdoor,
with Chainway C6000, your business is always &highly efficient on-line.
Meeting industrial standards, designed to support a various of mobile solutions. With the buildin high performance Cortex-A7 1GHZ quad core processor technology, the operators need only
one device to enjoy a convenient and easy job, C6000 will be the ideal choice for key-fact
business in mobile solutions, for simplified task flow, enhanced work efficiency, for shortened
time to customer response, more satisfied customer care service.
Chainway C6000 comes with world wide band 4G technology. Multi channels data and voice
communication guarantees the real-time communication and data efficiency, C6000 brings you
the best ROI.
1.2 Precaution Before Using Battery
Do not leave batteries unused for extended periods of time, either in the product or in
storage. When the battery has been unused for 6 months, check the charge status and
charge or dispose of the battery as appropriate.
The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500
charge cycles, whichever occurs first. One charge cycle is a period of use from fully charged,
to fully discharged, and fully recharged again. Use a two to three year life expectancy for
batteries that do not run through complete charge cycles.
Rechargeable Lithium-Ion batteries have a limited life and will gradually lose their capacity
to hold a charge. This loss of capacity (aging) is irreversible. As the battery loses capacity,
the length of time it will power the product (run time) decreases.
Lithium-Ion batteries continue to slowly discharge (self-discharge) when not in use or while
in storage. Routinely check the battery’s charge status. The user manual typically includes
information on how to check battery status, as well as battery charging instructions.
Observe and note the run time that a new fully-charged battery provides for powering your
product. Use the new battery run time as a basis to compare run times for older batteries.
The run time of your battery will vary depending on the product’s configuration and the
applications that you run.
Routinely check the battery’s charge status.
Carefully monitor batteries that are approaching the end of their estimated life.
Consider replacing the battery with a new one if you note either of the following conditions:
The battery run time drops below about 80% of the original run time.
The battery charge time increases significantly.
If a battery is stored or otherwise unused for an extended period, be sure to follow the
storage instructions in this document. If you do not follow the instructions, and the battery
has no charge remaining when you check it, consider it to be damaged. Do not attempt to
recharge it or to use it. Replace it with a new battery.
Always follow the charging instructions provided with your product. Refer to your product’s
user manual and/or online help for detailed information about charging its battery.
Charge or discharge the battery to approximately 50% of capacity before storage.
Charge the battery to approximately 50% of capacity at least once every six months.
Remove the battery and store it separately from the product.
Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
Chapter 2 Installation Guide
2.1 Appearance
The C6000 device has black and white appearance optional
2.2 Buttons
Button
Function
Power Button
Press and hold to turn the device on or off
Custom Function Button
Customize function by software
SCAN
Scan Button
X
Cancel Button
Num
Switch white keyboard function
Fn
Switch orange keyboard function
Setting Button
Right of the Fn Button
Enter
Enter Button
2.3 Micro SD、SIM、PSAM Card Installation
Detailed installation of Micro SD、SIM、PSAM Card steps are as follows:
2.4 Battery Charging
Use the adapter to charge the battery via the USB connector of the snap-on;. Don't use other
brands of charger for device
2.5 Device Turning on/off
Press the ‘Power’ button on the top about 3s due to turn on/off. And press it shortly to wake up.
Chapter 3 Call Function
3.1 Phone
Click this icon :
Click the number button to input the numbers;
Micro SD
PSAM
SIM
Click the button to confirm and dial;
Click the to end the calling;
3.2 Contacts
Click ‘Contacts’ to open the contacts list;
Click ‘ ’ to add the new contact;
Click ‘ ’ to import/export or delete the contact list;
3.3 Messaging
Contacts
Logs
Voice Calling
Emulated Numeric Keypad
Favorites
Contact List
Group
Click ‘ ’ to open the message list;
Click ‘ ’ to input the content;
Click ‘ ’ to send the message;
Click ‘ ’ to add photos, videos;
Chapter 4 Barcode Reader
Open the Barcode Demo in APP Center and then press the ‘Scan’ button to start scanning;
Note: Please scan the barcode correctly, otherwise the scanning might be failed;
Chapter 5 RFID Reader
5.1 High Frequency
5.1.1 14443A
Open the 14443A demo within Appcenter, and press the ‘Scan’ button to start reading;
Mifare and Ultra Light reading/writing are also supported;
5.1.2 14443B
Open the 14443B demo within Appcenter, and gain UID of the card
1D Barcode
2D Barcode
5.1.3 15693
Open the “15693” demo within Appcenter, and then reading and writing information of the tag
5.2 NFC
Open the “NFC” demo within Appcenter, and then reading and writing information of the
tag
Chapter 6 The Other Functions
6.1 PING
1. Open the Ping in Appcenter;
2. Set the Ping parameters and select the internal/external addresses;
6.2 Bluetooth
1. Open the Bluetooth demo in Appcenter and turn on the Bluetooth;
2. Input the content or select the file, then scan the nearby Bluetooth printer and
pair them;
3. Select the printer and click ‘Print’ to print the content;
6.3 GPS
1. Open the GPS demo in Appcenter and turn on GPS module;
2. Set the GPS parameters and get the GPS data information
6.4 Volume Settings
1. Open the Volume Setting demo in Appcenter;
2. Set the volumes based on the requirements;；
6. 5 Sensor
1. Open the Sensor demo in Appcenter;
2. Test the sensor based on the requirements;
6.6 Keyboard
1. Open the Keyboard demo in Handset Appcenter;
2. Set and test the key values of the device；
6.7 Network
1. Open the Network demo in Appcenter;
2. Test the WIFI/Mobile signal based on the requirements;
6.8 KeyboardEmulator
Keyboard Emulator can be used directly for multiple using environments and the output
formats can including prefix/suffix/enter/tap can also be defined, please define the options
properly based on the features of the device.
Chapter 7 Device Specifications
Physical Parameters
Dimensions
157.6mm*73.7mm*29mm
Weight
297g (includes main battery)
Screen
4in.WVGA (480*800) TFT-LCD, capacitive dual touch
Keyboard
numeric keypad, 3 side buttons
Battery
Main bat. (rechargeable li-ion polymer, 3.7V, 4000 mAh)
Expansion Slot
MicroSD/TF, maximum capacity of 32G
SIM Slot
1 PSAM, 1 SIM, 1 MicroSD
Audio
0.5W wat
Camera
OV 8M pixels, auto focus (optional)
Performance Parameters
CPU
Qualcomm 8909 1.3GHz quad core
OS
Android 5.1
Memory
1GB RAM, Build-in 8GB Flash
Interface
USB Micro-B,
Storage Card Type
MicroSD card
Maximum Expansion
Storage
32GB
Environmental Parameters
Operating Temperature
-10℃ to 50℃
Storage Temperature
-40℃ to 70℃
Humidity
5%RH-95%RH（non-condensing）
Dropping Survive
1.5m/3.9ft. drop, 6 sides (concrete floor under operating temp.)
Sealing
IP65, IEC compliance
Wireless Communication
WAN
GPRS: 850/900/1800 MHz ;
WCDMA Band1;
CDMA Evdo Rev.A: 800MHz;
TD-SCDMA: Band34/39;
TDD-LTE: Band38/39/40/41;
FDD-LTE: Band1/3.
WLAN
IEEE802.11 a/b/g/n, internal antenna
WPAN
Bluetooth v4.0
Data Collection
1D Barcode Scan Engine
1D barcode（Symbol SE955, laser, hardware decoding）:
UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of
5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, ect
2D barcode（Symbol SE4500，COMS, software decoding）：
Data Matrix, QR Code, Aztec Code, PDF417, US Planet, UK
Postal, ect.
2D Barcode Scan Engine
2D CMOS laser scanner: Symbol SE4500
Sensor resolution: 750 (horizontal ) * 480 (perpendicular) pixel
(gray level)
Roll tolerance: 360º
Pitch tolerance: ±60º
Skew tolerance: ±60º
Ambient light: 9000ft.candles/96900 lux (lightless)
Aiming LED (VLD): 655nm ± 10nm
Illumination element: 650nm ± 5nm
Field of view: 40º horizontal，25º perpendicular
Barcode type: PDF417, MicroPDF417, Composite, RSS, TLC-39,
Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal
Codes: US PostNet, US Planet, UK Postal, Australian Postal,
Japan Postal Dutch Postal (KIX),ect.
Decode ranges
SR Focus Near Far
5 mil Code 39 2.1 in./53 mm. 7.5 in./191 mm.
100% UPC/ENA 1.6 in./41 mm. 15.5 in./394 mm.
6.7 mil PDF417 3.4 in./86 mm. 7.1 in./180 mm.
RFID
HF 13.56MHz, ISO14443A/ISO15693（optional）
Developing Environment
SDK
Chainway SDK
Programming Language
Java
Developing Tool
Eclipse/Android Studio
Loading...