How it Works
Cerwin-Vega
Loading...
CVXL-115
Instruction Manual
33 pgs3.87 Mb0

Cerwin-Vega CVXL-115, CVXL-112, CVXL-218s, CVXL-215, CVXL-118s Instruction Manual

CVXL SERIES MANUAL
CVXL-112, CVXL-115, CVXL-215, CVXL-118s, and CVXL-218s
Powered Loudspeakers
Instruction Manual (English)
Contents
IMPORTANT SAFETY INSTRUCTIONS ....................................................................................................................................... 3
REGULATORY CERTIFICATION ................................................................................................................................................. 5
Introduction ............................................................................................................................................................................ 6
Before you begin ..................................................................................................................................................................... 6
Quick Start ............................................................................................................................................................................... 7
Loudspeaker Placement .......................................................................................................................................................... 7
Rear Panel - Mixer - CVXL-112, CVXL-115, CVXL-215 .............................................................................................................. 8
Rear Panel - Mixer - CVXL-118s, CVXL-218s .......................................................................................................................... 10
CVXL Power Connections - Rear Panel .................................................................................................................................. 12
Using the CVXL-112 as a floor/stage monitor ....................................................................................................................... 13
Using the pole mount - CVXL-112, CVXL-115 only ................................................................................................................ 14
Using suspension points - CVXL-112, CVXL-115, CVXL-215 only ........................................................................................... 15
Application #1 - Single CVXL-112, CVXL-115, or CVXL-215 ................................................................................................... 17
Application #2 - Adding a second CVXL-112, CVXL-115, or CVXL-215 .................................................................................. 18
Application #3 - Adding a Subwoofer ................................................................................................................................... 19
Application #4 - Adding Two Subwoofers ............................................................................................................................. 20
Application #5 - Subwoofer Cardioid Mode - Two Subwoofers............................................................................................ 21
Application #6 - Subwoofer Cardioid Mode - Three Subwoofers ......................................................................................... 22
Application #7 – Daisy-Chain ................................................................................................................................................ 23
Application #8 – Adding a CVXL-112 as a Stage Monitor ...................................................................................................... 24
Application #9 – Large Venue/Front of House ...................................................................................................................... 25
Protective Grill ...................................................................................................................................................................... 26
Remote Main Volume ........................................................................................................................................................... 26
Troubleshooting .................................................................................................................................................................... 27
Care and Maintenance .......................................................................................................................................................... 29
Cable Connections ................................................................................................................................................................ 29
Warranty ............................................................................................................................................................................... 31
How to Obtain Warranty Service .......................................................................................................................................... 33
2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
WARNING: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
NOTE: The hand within an equilateral triangle is intended to alert the user to specific guidance and information regarding the operation of the unit and should be read fully before using the unit for the first time.
a) Read and follow all the safety and operating instructions before connecting or using this product. b) Retain this user manual for future reference. c) All warnings on the unit and its packaging should be read and followed.
CAUTION: To reduce the risk of fire or electric shock, do not expose this product to rain, moisture, dripping, or splashing. Do not place objects containing liquid (such as vases or glasses) on the unit. Do not use this product near water, such as a bath tub or swimming pool. Unplug the unit from the wall outlet before cleaning. Never use thinner, cleaning fluids, solvents, or chemically impregnated cloths. For cleaning, always use a soft dry cloth. Unplug the unit during lightning storms or when it is unused for long periods of time.
CAUTION: The unit should be installed so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings. It should not be placed within a built-in installation (such as a bookcase or cabinet) that may impede the flow of air through its ventilation openings and/or fan assembly. The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. Naked flame sources, such as lighted candles, should not be placed on or near the unit.
WARNING: Do not place the unit on an unstable surface, cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a person and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer. Any mounting of the device on a wall or ceiling should follow the manufacturer’s instructions and should use a
mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive forces, and uneven surfaces may cause the appliance and cart combination to overturn. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tipping.
NOTE: Should the unit become damaged beyond repair or reach the end of its life, please consult the regulations regarding disposal of electronic products in your region.
NOTE: Cerwin-Vega cannot be held responsible for damage caused by improper use of the unit and/or the applications provided for use with the unit.
The unit shall be connected to a mains socket outlet with a protective ground (earth) connection.
3
IMPORTANT SAFETY INSTRUCTIONS (continued)
1. The unit and power supply should only be connected to a power outlet that matches the voltage and frequency marked on the rear of the unit.
2. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and exit points on the unit.
3. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong provided for your safety. If the provided plug does not fit into an outlet, consult a qualified electrician for replacement of the obsolete outlet.
4. If the mains plug supplying this product incorporates a fuse, then the fuse should be replaced only with one of identical or lower rupture value.
5. Never use a damaged or frayed power cable; this can cause risk of exposure to lethal voltages.
6. The power cable of the unit should be unplugged from a wall outlet when it will not be used for a long period of time.
7. Only use attachments/accessories specified by the manufacturer.
8. To completely disconnect the power input, the mains plug of the speaker should be disconnected from the mains connection.
9. The mains plug of the unit should not be obstructed, so that it can be easily accessed during intended use.
CAUTION: To reduce the risk of fire or electric shock, do not remove any covers or open the unit. There are no user-serviceable parts inside. DO NOT ATTEMPT SERVICING OF THIS UNIT YOURSELF. REFER TO QUALIFIED SERVICE PERSONNEL FOR SERVICING.
The unit should be serviced by qualified service personnel when any of the following happens:
– The power cord or the plug has been damaged. – Objects have fallen onto or liquid has been spilled into the unit. – The unit has been exposed to rain or liquids of any kind. – The unit does not appear to operate normally or exhibits a marked change in performance. – The device has been dropped or the enclosure has been damaged.
Keep speakers out of extended or intense direct sunlight; the driver suspension could prematurely dry out, and finished surfaces may become degraded.
The speaker contains sensitive components. Do not drop, disassemble, open, crush, bend, deform, puncture, microwave, incinerate, paint, or insert foreign objects into speaker.
The speaker is easily capable of generating sound pressure levels (SPL) sufficient to cause permanent hearing damage. Caution should be taken to avoid prolonged exposure to SPL in excess of 90 dB(A).
Operate and store the speaker in a place where the temperature is between -20° and 55°C (-4° and 131°F). Low or high temperature conditions might cause the speaker to temporarily stop working. Avoid dramatic changes in temperature or humidity when using the speakers, as condensation may form within the speaker.
Turn the speaker off when in any area with a potentially explosive atmosphere. Obey all signs and instructions, as sparks in such areas could cause an explosion or fire resulting in serious injury or death. Areas with potentially explosive atmosphere are often, but not always, marked clearly. Potential areas include fueling stations, areas where the air contains chemicals or partials (including grain dust or metal particles), below deck on boats, and chemical transfer storage facilities.
The speaker contains small parts which may present a choking hazard to small children. Keep the speaker and its accessories away from small children.
4
REGULATORY CERTIFICATION
Cerwin-Vega declares under sole responsibility that this product, to which this declaration relates, is in conformity with the following standards:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, radiates radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
5
Introduction
Congratulations! Welcome to the Cerwin-Vega family! You’ve joined a growing group of audio professionals who have turned to Cerwin-Vega for the most advanced audio reproduction systems available. All Cerwin-Vega products are thoroughly tested to ensure that they meet or exceed our performance specifications. Backed by the best service in the industry, Cerwin-Vega is dedicated to quality and reliability. For a complete overview of Cerwin-Vega products and services, visit www.cerwin-vega.com
Before you begin
This manual covers the CVXL-Series active speakers: the CVXL-112, CVXL-115, and CVXL-215 (referred to as “tops”) and the CVXL-118s and CVXL-218s (referred to as a “subs”). These speakers are designed for portable applications (such as being mounted on a tripod stand or pole mount or stacked directly on a floor, stage, or stable platform) and fixed installations (such as being “flown” or suspended using appropriate wall/ceiling mounting hardware). These speakers are not intended for fixed installation in high-moisture or outdoor environments, as moisture can cause corrosion of electrical contacts and damage the speaker cone or surround. Cerwin-Vega does not support suspension of the subwoofer models covered in this manual.
Cerwin-Vega speakers can generate considerable vibrational energy. When placed on a slippery surface such as polished wood or linoleum, the speaker may move due to its own mechanical vibration. Precautions should be taken to assure that the speaker does not fall off a stage or table when in operation.
The CVXL-118s and CVXL-218s subwoofers include a receptacle cup to allow mounting of a satellite speaker using a standard speaker pole shaft. When using a standard speaker pole shaft, be sure to observe the following precautions:
There are many types of pole stands and pole shafts available. Please refer to qualified service personnel from
the pole stand and pole shaft manufacturers for installation service. Improper use of accessories or inappropriate installation could present a hazard.
Check the speaker pole shaft specification to be certain it is designed to support the weight of the speaker. Observe all safety precautions specified by the speaker pole shaft manufacturer. Always verify that the subwoofer is placed on a surface that is flat, level, and stable. Route cables so that they will not be tripping hazards. Always be cautious in windy outdoor conditions, as the stability of the entire system may be compromised.
6
STEP 1
Make sure the loudspeaker is unplugged from the AC mains. Be sure the power switch is set to the OFF position. Turn the LEVEL knob to the lowest level (fully counterclockwise).
STEP 2
Place the loudspeaker in the intended location. Connect the source audio equipment OUTPUT to the loudspeaker INPUT. Be sure the source
equipment is powered on and set to a normal output level.
STEP 3
Connect the power cord to the loudspeaker and AC power outlet. Set the POWER switch to the ON position and verify the POWER LED indicator is illuminated. Slowly turn the LEVEL knob clockwise until the sound output is at the desired level. If there is
no sound, check to make sure that the source equipment is providing audio output.
NOTES
When you are finished using the loudspeaker, set the POWER switch to the OFF position BEFORE removing any cables or turning off the source audio equipment.
Quick Start
The steps below provide a quick reference on how to set up and use a single loudspeaker. A typical setup will follow the same basic steps.
Loudspeaker Placement
Never point a microphone directly at the loudspeaker, as this will result in feedback (unwanted sound). Be sure
the loudspeaker is placed away from the front of a microphone or directly behind a microphone when it is in a floor monitor position.
When used with turntables, the loudspeaker should be carefully placed so that any vibrations do not interfere
with the turntable performance and functionality.
Avoid placing the loudspeaker in corners or along the walls of a room. Doing so will increase the low-frequency
sounds, which will result in a muddy and incoherent sound reproduction.
Avoid placing the speaker directly on a hollow stage. It is better to place the loudspeaker on a tripod stand or a
sturdy table.
The loudspeaker should be placed two to four feet above the ear level of the audience since the human body can
absorb sound, especially at high frequencies. This will ensure that the entire audience can hear the sound system with the best possible clarity.
7
Rear Panel - Mixer - CVXL-112, CVXL-115, CVXL-215
INPUT 1, INPUT 2, INPUT 3 GAIN KNOBS
Each knob adjusts the gain level on the respective input signal. The full clock-wise position (MAX) sets the gain level to maximum whereas a full counter-clockwise (MIN) position sets the gain level to the minimum ‘MUTE’ level. It is recommended to set each level knob to the middle position and the Main Level knob to the MIN or fully counter-clockwise position when first connecting the system.
INPUT 1, INPUT 2 MIC/LINE SWITCH ES
Set each switch according to the equipment connected to INPUT 1 and INPUT 2. For example, if a microphone is connected to INPUT 1, set the switch to ‘MIC’. If a mixing console or acoustic-electric guitar is connected then set the switch to ‘LINE’.
NOTE: The input switch must be properly set to the device that is connected to the input. Any mistake may result in unexpected sound level.
SIGNAL/CLIP INDICATORS
Each of the three inputs is monitored by an indicator that provides status on the incoming audio signal. The SIGNAL indicator is illuminated when there is an audio signal present with a level greater than -30dBu. The CLIP indicator is illuminated when the audio signal is clipping and adjustments must be made to avoid amplifier shutdown and poor sound quality. Adjustments to prevent clipping are made by reducing the input signal gain/level on the appropriate channel or reducing the volume level on your audio source, if possible.
INPUT 1 & INPUT 2 INPUT JACKS
A combination input on each channel allows for either XLR or ¼” TRS cable types.
INPUT 3 INPUT JACKS
A pair of ¼” TS unbalanced input jacks is provided on this channel for stereo connections such as a keyboard or media device. Devices with RCA outputs can use these inputs with the appropriate cable or plug adapter. Both input jacks on this channel are summed into one mono signal.
THRU 1 & THRU 2
The balanced XLR outputs THRU 1 & THRU 2 are parallel connections to the respective INPUT 1 and INPUT 2. The level controls for INPUT 1 & INPUT 2 will not affect the signal on the direct output connection.
MIX OUTPUT
This is a balanced XLR output that is a sum of all three input channels. This output is not affected by changes to the Main Level knob or the custom features but is affected by the levels set on each channel gain knob. This connection is designed to provide an output which combines all three input channels together for connecting to another CVXL powered speaker or a recording device.
8
MAIN LEVEL KNOB & REMOTE VOLUME CONT ROL
It is highly recommended to have the volume set to the minimal (MIN) level upon initial system start-up and it can be adjusted two different ways. On the Main Level knob, volume is increased in a clockwise rotation and decreased in a counter-clockwise rotation. Another method to control the volume is by using the Remote connection (sold separately). A removable three-terminal jack can be wired over long distances to a remote volume control device with a corresponding connection.
INDICATORS
Three indicators provide operating condition status on the CVXL-112, CVXL-115, or CVXL-215:
1) The POWER indicator (green) will illuminate when power is properly applied and the main power switch is
‘ON’.
2) The CLIP indicator (yellow) will illuminate when the sound output is near the maximum and automatically
reduced to prevent damage to the speaker. In such a condition, it is suggested to reduce the volume level so the CLIP indicator does not illuminate. Continued use, while this indicator is illuminated, may result in a protect condition where no sound can be produced.
3) The PROTECT indicator (red) will illuminate when a fault occurs and the speaker automatically places itself
into a condition where sound output is shut off. This condition may be the result of excessive clipping, excessive heat, or low voltage. These conditions all can cause significant damage to the product.
CUSTOM FEATURES
MODE
The MODE switch adjusts the contour of the overall frequency response optimizing the speaker for use as either a stage monitor (CVXL-112), for vocal reinforcement (CVXL-115, CVXL-215), or a main sound system (CVXL-112, CVXL-115, CVXL-215). When set to ‘MAIN’, the response is controlled by the MAIN EQ switch described below. When set to ‘MONITOR’ on a CVXL-112, the mid-range and sub-low frequencies are attenuated which helps increase focus on the low and high frequencies while potentially reducing feedback and muddiness. When set to 'VOICE' on a CVXL-115 or CVXL-215, the high and low frequencies are slightly attenuated allowing for better intelligibility when used as a PA (public address) system. It is recommended that users listen to their system with this switch in either setting to determine what is best for their needs.
MAIN EQ
The MAIN EQ switch adjusts the contour of the overall frequency response optimizing the speaker for use as either a main PA speaker or for playback of recorded music. When set to ‘LIVE’, the response is optimized for using the speaker as a PA (public address) or sound reinforcement system. When set to ‘PLAYBACK’, low frequencies are increased and mid frequencies are decreased to enhance pre-recorded music. These settings are ideal for situations where an external mixer or EQ device is not available or for playback only situations such as mobile DJ’s.
HIGH PASS 100 Hz
When engaged to ‘ON’, the HIGH PASS 100 Hz switch attenuates overall frequency output below 100 Hz. This is recommended to reduce stage rumble when the speaker is used as a floor monitor or in situations where low frequencies need to be attenuated such as in combination with a subwoofer.
9
Rear Panel - Mixer - CVXL-118s, CVXL-218s
SIGNAL/CLIP INDICATOR
Each of the two inputs is monitored by an indicator that provides status on the incoming audio signal. The SIGNAL indicator is illuminated when there is an audio signal present with a level greater than -30dBu. The CLIP indicator is illuminated when the audio signal is clipping and adjustments must be made to avoid amplifier shutdown and poor sound quality. Adjustments to prevent clipping are made by reducing the input signal gain/level on the appropriate channel or reducing the volume level on your audio source, if possible.
INPUT 1 & INPUT 2 INPUT JACKS
A combination input on each channel allows for either XLR or ¼” TRS cable types.
THRU 1 & THRU 2
The balanced XLR outputs THRU 1 & THRU 2 are high pass filtered from the respective INPUT 1 and INPUT 2 connectors. The crossover frequency of the high pass filtering is determined by the position of the CROSSOVER FREQUENCY switch.
LINK OUTPUT
This is a balanced XLR output that is the sum of the two input channels. This output is not affected by changes to the Main Level knob or the custom features. This connection is designed to provide an output which combines both input channels together for connecting to an additional powered speaker.
MAIN LEVEL KNOB & REMOTE VOLUME CONTROL
It is highly recommended to have the volume set to the minimal (MIN) level upon initial system start-up and it can be adjusted two different ways. On the main volume knob, volume is increased in a clockwise rotation and decreased in a counter-clockwise rotation. Another method to control the volume is by using the Remote connection (sold separately). A removable three-terminal jack can be wired over long distances to a remote volume control device with a corresponding connection.
INDICATORS
Three indicators provide operating condition status on the CVXL-118s and CVXL-218s:
1) The POWER indicator (green) will illuminate when power is properly applied and the main power switch is
‘ON’.
2) The CLIP indicator (yellow) will illuminate when the sound output is near the maximum and automatically
reduced to prevent damage to the speaker. In such a condition, it is suggested to reduce the volume level so the CLIP indicator does not illuminate. Continued use, while this indicator is illuminated, may result in a protect condition where no sound can be produced.
3) The PROTECT indicator (red) will illuminate when a fault occurs and the speaker automatically places itself
into a condition where sound output is shut off. This condition may be the result of excessive clipping, excessive heat, or low voltage. These conditions can cause significant damage to the product.
10
Loading...
+ 23 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use