CertainTeed QPutty User Manual
Distributed in Canada by:
Professional: 800-233-8990 • Consumer: 800-782-8777
QuietPutty 380 Application Instructions
QuietPutty has been specifically designed to maintain the performance of acoustically rated walls.
QuietPutty is designed to acoustically seal fire rated electrical, phone and plumbing outlet boxes. No special
skills or tools are required. To ensure adequate adhesion, all surfaces shall be clean and free of dust, grease, oil,
loose materials, rust or other substances.
QuietPutty is non-toxic, chemically inert, and contains no hazardous materials.
Notes
Use normal care and precaution when working with Quiet Solution products:
• Clean-up with soap and water.
• Follow all OSHA guidelines when completing any construction project.
• Dispose of excess QuietPutty in the same responsible manner as you would any building material.
For further information see the Material Safety Datasheet (MSDS) on line at www.QuietSolution.com.
QuietPutty Application Instructions
Copyright © 2010 Serious Materials
Distributed in Canada by:
Professional: 800-233-8990 • Consumer: 800-782-8777
Step 1: Remove the release paper from
the QuietPutty pad.
Step 2: Inspect the fire rated outlet box to
make sure it is properly installed and free of
dust, grease, oil, loose materials, rust or other
substances.
Step 3: Starting at side, align the QuietPutty
pad to front edge of box and overlap onto
the stud.
Step 4: Cut the QuietPutty pad to allow
the pad to fit around conduits or cables.
Step 5: Pleat the extra material at the corners.
Step 6: Fold the pleated corners into place
and firmly press the QuietPutty pad into
place so that the entire surface of the outlet
box is covered.
Printed in Canada on recycled paper. C July 2010 CTG-2827
QuietPutty Application Instructions
Copyright © 2010 Serious Materials
Loading...