1000W/2000W POWER INVERTER
(12V-240V)
CTSIWAVINVB
SAFETY & WARNINGS
• Please do not operate the inverter with wet hands.
• Keep out of reach of children.
• The temperature of the shell will be high after operating for a long time; do not
touch it due to risk of burns.
• Do not put metal into the inverter in order to avoid electric shock.
• Do not touch the metal of the socket while inserting the plug into the socket.
• Keep the inverter away from explosives.
• Keep all AC electricity away from the inverter; it will damage the inverter and may
cause an electric shock.
OVERVIEW
1. Fan
4. DC input
“-“ terminal
7. AC output socket 8. USB port 9. ON/OFF Switch
2. DC input
“+” terminal
5. Power light
(Green light)
3. Earth stud
6. Fault light
(Red light)
Connecting in the incorrect manner will destroy the power inverter as well as the electrical
equipment. Follow the following steps in sequence and be sure to follow the instructions
accurately.
1. When using outside car or exceeding 200W:
o When using outside a car or exceeding 200W, please use the battery clip
cable to connect with the battery.
o The battery clip cables have a red and black cable. Connect the red
cable with "+” and fix it into place, connect the black cable with and fix it
into place.
o Connect the clip on the red cable with “+” terminal of the battery and
connect the clip on the black with the terminal. Do not reverse or it will
destroy the power inverter.
o Turn on the power inverter, the green light will on; insert the plug of the
electric equipment into the AC socket of the inverter.
2. Only use for class II appliances. Do not use for the following:
o All electric appliances that exceed the rated power of the inverter.
o Generally capacitive load and perceptual load appliances including air
conditioners, high power electric drills, fridges, microwave ovens and
blenders.
o Appliances that have strict requirements on power supply, such as
precise equipment, using ordinary power inverters with this kind of
equipment will affect the measuring data.
3. Do not use the USB port for the following:
o USB is only for charging; it does not have a data exchange function.
o Before charging, check carefully if the charging current of the appliance is
under the inverter's current. If it exceeds the charging current of the
inverter, do not use or it may destroy the USB port.
o Some devices must be charged with their original charger; do not charge
them with the USB port of the inverter or the device may be damaged
4. Use the inverter in a well-ventilated area and make sure the fan is not blocked. Do
not place the inverter in rain or in a humid environment, keep it dry. In order to
maintain a long lifespan of the inverter, operate it under 85% of the related power.
5. The inverter has low input voltage protection, input over-voltage protection,
overload protection, over-heat protection and short circuit protection. If these
protections trigger, the inverter will stop working and must be turned off and on
again before continuing use.
6. The fan will work when the load exceeds 30% of the related power of the inverter,
or when the inside temperature of the inverter exceeds 60°C.
7. Using extension cables:
o Use of extension cables between the inverter and the battery is not
recommended, as it will cause loss of DC electricity and affect the
performance of the inverter.
o If using an extension cable, it is suggested to use a high-quality cable to
reduce the loss of electricity.
8. Other matters:
o This is modified sine wave inverter; when measuring the voltage, use
precise equipment.
o When supplying power to an audio system, radio or TV, the appliance
may experience interference. This is normal and not a cause for concern.
o When using in cars, stop using the inverter while the engine has stopped.
o Do not disassemble the inverter. This unit contains no user-serviceable
parts.
DC input
DC 12V (DC11-15V)
AC output
AC 210V-240V
Output frequency
50 ± 3Hz
USB output
DC 5V MAX 2100mA
Continuous power
1000W
Peak power
2000W
Output wave
Modified sine wave
No load current
12V input
≤0.4A
Input low voltage alarm
12V input
DC 10.2 - 10.8V
Input low voltage shutdown
12V input
DC 9.2-9.8V
Input over voltage shutdown
12V input
DC 15 - 16V
Overload shut down
1100W-1350W
Fuse
12V input
40A x3
Operating temperature
-15-+25°C
Cooling method
Fan
1x earth wire
SPECIFICATIONS
Efficiency
Accessories
≥80%
1x battery clip cable
State description
LED light
Alarm
AC output
alarm
batteries.
shut down
batteries.
shut down
batteries.
recover automatically.
drop before using.
Restart after troubleshooting.
Function
Input low
voltage
Input low
voltage
Input over
voltage
Overload
protection
Overheat
shut down
Output
short circuit
Disposal
Green on
Red off
Green on
Red on
Green on
Red on
Green on
Red on
Green on
Red on
Green on
Red on
Alarm AC output
Alarm No AC output
No Alarm No AC output
No Alarm No AC output
Alarm No AC output
No Alarm No AC output
Solution
Stop using and recharge the
battery or replace with new
Stop using and recharge the
battery or replace with new
Stop using and recharge the
battery or replace with new
• Reduce the load to the
rated power.
• Restart inverter manually.
• Wait for 1-3 minutes to
Stop using, cool the inverter
and wait for the temperature to
Stop using, check the
connecting cable and loads.
This marking indicates that this appliance should not be disposed with other
house-hold wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Loading...