Libri - Mounting Kit, Wall Mount Plug In
Installation Instructions
General Product information
This product is suitable for indoor dry locations only.
The product turns on automatically when the xture is
pulled away from the wall.
These are supplemental instructions to be used in
conjection with the Libri - Hardwired or Libri - Plugin
instructions.
Wall Mount Plugin Backplate is used when mounting directly to the wall and plugging into a wall outlet. The wall
mount is an elongated rectangular piece of walnut or
brushed aluminum that allows the cord to exit discreetly
below the xture.
WARNING
This product requires the use of the supplied
LEFT
RIGHT
CONSTANT CURRENT led driver. DO NOT
CONNECT DIRECTLY TO LINE VOLTAGE OR USE
ANY OTHER POWER SOURCE!!!
Libri reconguration from Left to Right or vice versa.
Positioning the Fixture
For mounting the libri as a bedside reading xture, there is an optimal zone within which to mount the xture. The exact position
within this zone will depend on personal preference. If you enjoy sitting upright to read, you will want to mount it high and away
from the edge of the bed. If you don’t have long arms and want to control the light while laying down, you will want to mount the
xture lower and closer towards the bed. Also consider the cord that exits the bottom of the cord cover; this solution was meant to
allow the cord to exit behind a night stand and out of sight.*
12” Wide Zone
*
14” Tall Zone
Mounting Zone
20” Above Bed Height
Edge of Bed
Height of Bed
FrontSide
CERNOGROUP.COM T_949.715.1534 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2016 CERNO LLC. ISSUE DATE 11/7/2016
CERNOGROUP.COM T: 949.715.1534 22892 GLENWOOD DRIVE, ALISO VIEJO, CA COPYRIGHT 2021 CERNO LLC. ISSUE DATE 01/01/2021
Libri - Mounting Kit, Wall Mount Plug In
Installation Instructions
Installing the Fixture
1
Attach the mounting plate to the wall securely
(drywall anchors included)
2
Slide the cord cover onto the mounting plate
as depicted by the arrow.
3
Pull excess cord out of the bottom of the cord
cover as you place the libri light xture body
against the cord cover.
4
Use screws to secure the light xure into place.
Plug the cord into the supplied constant cur-
5
rent LED driver.
WARNING
DO NOT CONNECT DIRECTLY TO
LINE VOLTAGE OR ANY OTHER
POWER SOURCE!
1
4
Cord Cover
5
3
Mounting
Plate
2
3
CERNOGROUP.COM T_949.715.1534 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2016 CERNO LLC. ISSUE DATE 11/7/2016
CERNOGROUP.COM T: 949.715.1534 22892 GLENWOOD DRIVE, ALISO VIEJO, CA COPYRIGHT 2021 CERNO LLC. ISSUE DATE 01/01/2021
Loading...