Calx 19 E26 SOCKET
Installation Instructions
General Product information
This product is suitable for indoor dry locations only.
This product is to be installed to a standard 4” junction box
with a 3” round plaster ring or an octagon junction box.
CAUTION - RISK OF FIRE
This product requires installation by a quali ed
electrician. Before installing be sure to read
all instructions and TURN POWER OFF TO THE
JUNCTION BOX
Adjusting the Fixture Height
B Measure the desired height (H) you want the
xture to hang below the ceiling.
C Thread the suspension cable from crossbar
assembly through the canopy and thumb nut.
D Push the end of the suspension cable into the
cable gripper on the top of the xture, making
sure that it exits out of the side hole.
Adjust the cable length until your desired
height (H) is acheived. Cut excess cable.
Junction Box
Plaster Ring
Line-in (hot)
Crossbar Assembly
Fixture Cord (hot)
H B
Making Electrical Connections
E Make electrical connections as shown using
the supplied wire nuts. Make sure that the clear
power cord passes through the o -center hole
in the canopy.
Mounting the Fixture
F Attach the crossbar to the junction box using
the supplied #8 screws.
E
Line-in (neutral)
#8 Screw
F
Fixture Cord
(neutral)
Canopy
Strain Relief
C
Thumb Nut
Suspension Cable
Cable Gripper
CERNOGROUP.COM T_949.715.1534 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2017 CERNO LLC. ISSUE DATE 10/15/2017
Calx 19 E26 SOCKET
Installation Instructions
Junction Box
Canopy
Strain Relief
G
I
Thumb Nut
K
H
Securing the Canopy
G After electrical connections have been made, place all
excess wires inside of the junction box.
H Slide the canopy up the cable and secure it by
screwing the thumbnut into the crossbar.
Securing the Shade
I Feed excess clear power cord into J-box. Pinch the
black strain relief onto the cord with a set of pliers and
press into the canopy hole.
Shade Assembly
Socket Assembly
J Gently rest shade assembly on to the socket assembly.
K Use zip ties (2x) to secure the power cord to the
suspension cable.
J
CERNOGROUP.COM T_949.715.1534 1751 MCGAW AVE, IRVINE, CA 92614 COPYRIGHT 2017 CERNO LLC. ISSUE DATE 10/15/2017
Loading...