Page 1
V1.0b
CERIO Corporation
CW-300N
eXtreme Power 11n 2.4Ghz 2x2 Ceiling /
Wall PoE Access Point (500mW)
Quick Start Guide
Page 2
V1.0b
1. Overview.............................................................................................................................................. 3
2. Package Content ............................................................................................................................... 3
3. Hardware Specifications ................................................................................................................. 4
4. Product Outward Appearance ....................................................................................................... 5
5. Panel Function Description............................................................................................................ 6
6. Mounting Installation ....................................................................................................................... 7
7. Uninstallation for Mounting kit ...................................................................................................... 8
8. Software Configuration ................................................................................................................... 8
Page 3
V1.0b
1. Overview
The CW-300N eXtreme Power 11n 2.4Ghz 2x2 Ceiling / Wall PoE Access Point bundles Cerio
CenOS 3.0 Software Core and supports Cerio Wireless Management Software (CWMS), enabling
connection to Wireless Indoor Networks for service providers deploying last mile services to home ,
businesses, and residential broadband subscribers. Network administrators can create and centrally
manage multiple subscriber service tiers using per-subscriber rate limiting features. The CW-300N
Structure(Form Factor) supports both Ceiling and Wall mounting.
The CW-300N eXtreme Power 11n 2.4Ghz 2x2 Ceiling / Wall PoE Access Point hardware utilizes
500mW eXtreme power and built-in 2.4 GHz 2x2 Omni directional antennas. The CW-300N eXtreme
Power 11n 2.4Ghz 2x2 Wireless Access Point hardware with Cerio CenOS 3.0 software may utilize Cerios
CWMS management software to better organize and manage a network infrastructure. The CW-300N can
also provide subscribers with an Ethernet connection for a local access to extend the range and increase
the performance of a wireless network. The CW-300N hardware also includes 802.3af PoE capabilities
that allows power and data to be supplied to the unit using CAT5 Ethernet cable.
2. Package Content
CW-300N Main Unit
Mounting Bracket x1
Mounting Screw Pack x1
Quick Installation Guide x1
Warranty Card x1
x1
Note: This product supports both Power 12V DC input and Power Over Ethernet (PoE PD) Power input design. However,
the Package Content does not include a Power adapter or PoE(PSE) source. Power sources can be requested as an
optional component, and includes 12V PoE adapter or 802.3af / at 48V PoE (PSE) devices. ( PoE Injector or PoE Switch )
Page 4
V1.0b
Application Software
Specifications
IEEE802.11e WMM
Wireless Specifications
Channel Spacing
Modulation Method
Transmit Power Variation
Max : 27 ± 1 dBm
3. Hardware Specifications
OS System Compatible edition
Network Standards
Conformance
Ethernet Configuration 10/100BASE-TX Auto MDI/MDI-X Ethernet Connector x 1
LED Indicators ( WLAN ) Wifi LED x 1
Cerio CenOS 3.0 and Cerio CenOS 4.0 Software Core
IEEE 802.11 b/g/n compliant
IEEE 802.3 / IEEE 802.3u
IEEE 802.11 b/g/n compliant
IEEE802.3af/at Power Over Ethernet compliant
IEEE 802.11Q
(Power over Ethernet 802.3.af/at PoE in )
( LAN ) Ethernet LED x 1
( PWR ) Power LED x 1
Data Transfer Rate
Frequency Range 2.412 ~ 2.462GHz (USA)
Operating Channels
IEEE802.11b : 1 / 2 / 5.5 / 11Mbps (auto sensing)
IEEE801.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps (auto
sensing)
IEEE802.11n : 300Mbps (Tx), 300Mbps (Rx)
2.412 ~ 2.484GHz (Japan)
2.412 ~ 2.472GHz (Europe ETSI)
2.457 ~ 2.462 GHz (Spain)
2.457 ~ 2.472 GHz (France)
IEEE802.11b/g/n : 20/40MHz
CSMA / CA with ACK
IEEE 802.11b: DSSS (DBPK,DQPSK,CCK)
IEEE 802.11g/n: OFDM (64-QAM,16-QAM,QPSK,BPSK)
Page 5
V1.0b
Receiver Sensitivity
Operating Temperature
-10 °C ~ 55 °C
Storage Temperature
-20 °C ~ 65°C
Operating Humidity
10% - 90% Non-Condensing
Storage Humidity
10% - 90% Non-Condensing
Antenna
Build in 2x2 Smart Omni Directional Antenna
using a provided Mounting Bracket.
System Power Consumption
9W Max.
Integragted IEEE 802.3af /at Power over Ethernet (PoE)
Main Unit with Bracket : 40x120x120mm
Unit Weight
166g
Certifications
FCC,CE, NCC, ROHS compliant
Max : -92 dBm
Environmental & Mechanical Characteristics
Form Factor Supports both Ceiling Mounting and Wall mounting, installed
Power Require
Dimensions ( W x H x D ) Main Unit : 36x120x120mm
Supports 110 – 220V AC Power;12 VDC,1A Input.(optional)
Supports Power Over Ethernet ( POE 48~57V voltage) (optional)
4. Product Outward Appearance
Product Front
Product Reverse side
Product Side
Page 6
V1.0b
5. Panel Function Description
3
2
1
4
5
6
7
1. The LED by Product Power.
2. The LED by Ethernet LAN Network function.
3. The LED by Wi-Fi function.
4. The Ethernet connect by LAN Port
5. Reset button (Please press and hold for about 15 seconds and then release)
6. 12V / 1A DC input power (The power adapter by optional)
7. Mounting Clips.
Page 7
V1.0b
6. Mounting Installation
1. Position the Mounting Bracket in the desired location. Use the screws and anchors in the mounting kit
to secure the bracket into position.
2. Align the device with the mounting Hinges on the bracket. Ensure that the mounting clips fit correctly
into each slot.
3. Slide the CW-300N down until the device is locked into place.
Page 8
V1.0b
7. Uninstallation for Mounting kit
8. Software Configuration
Example of Segment: (Windows 7)
IP Segment Set-up for Administrator's PC/NB
Set the IP segment of the administrator's computer to be in the same range as CW-300N for accessing
the system. Do not duplicate the IP Address used here with IP Address of CW-300N or any other device
within the network.
Page 9
V1.0b
Step 1 :
Please click on the computer icon in the bottom right window, and click “Open Network and Sharing
Center”
Step 2 :
In the Network and Sharing Center page, Please click on the left side of “Change adapter setting”
button
Page 10
V1.0b
Step 3 :
In “Change adapter setting” Page. Please find Local LAN and Click the right button on the mouse and
Click “Properties”
Step 4 :
In “Properties” page, please Click “Properties” button to TCP/IP setting
Page 11
V1.0b
Double click
Or click Install button
Step 5 :
In Properties page to setting IP address, please find “Internet Protocol Version 4 (TCP/IPv4)” and
double click or click “Install” button.
Step 6 :
Select “Use the following IP address”, and fix in IP Address : 192.168.2.#
ex. The # is any number by 1 to 253
Subnet mask : 255.255.255.0
And Click "OK" to complete the fixed computer IP setting
Page 12
V1.0b
Mode
AP / Client Bridge + Repeater AP mode
Passwork
default
Step 6 :
Open Web Browser
Launch as web browser to access the web management interface of system by entering the default IP
Address, http://192.168.2.254, in the URL field, and then press Enter. Browser will pop up "login" page.
Please key in username and password into the system on CW-300N.
The system manager Login Page then appears.
Enter “root” as User name and “default” as Password, and then click “OK” to login to the system.
Please consult the following information in accordance with your CenOS edition
CW-300N ( CenOS3.0) Login information
Default IP Address 192.168.2.254
Account root
Page 13
V1.0b
Mode
AAP / TAP / CAP mode
Default IP Address
192.168.2.254
Account
root
CW-300N-NGS ( CenOS4.0)
Passwork default
When display “Overview” information (As shown in the diagram above) in browser.
Representation administrator successfully entered the CW-300N(CenOS3.0) or
CW-300N-NGS(CenOS4.0) interface.
The CW-300N(CenOS3.0) or CW-300N-NGS(CenOS4.0) detailed functions instruction,
please refer to user’s manual.
Loading...