Do not use this bassinet until
you read and understand these
instructions!
Page 2
ENGLISH
IMPORTANT INFORMATION
Thank you for selecting the Century® Bedside Bassinet for
your baby.
❃ Need Help?
If you should have any problems with this product, call
toll-free 1-800-837-4044 from anywhere in the U.S. or
Canada. Outside these areas please call 216-963-2800
8:00 AM until 6:00 PM E.S.T. Monday through Friday.
Or write us at: Century Products Company
Macedonia, OH 44056-2096
Please have available the following information. See label
on Bassinet floorboard.
9600 Valley View Road
Attention: Consumer Relations Department
Date Of Purchase:
Model Number:
Manufacture Date:
❃ Safety First Check List
✔ Read and understand instruction booklet before using bassinet.
✔ Do not use in any vehicle.
✔ Never leave baby unattended.
✔ Do not use accessories other than those provided by manufacturer.
❃ Weight Limit:
Maximum Weight: 18 lbs. (8.2 kg.)
❃Tools Required:
Phillips Screwdriver
❃ Cleaning:
Canopy:
• Hand washable only.
• Wipe with damp cloth.
Short Skirt:
• Machine washable - wash separately on gentle cycle.
• Machine Dry - dry with cool air.
Long Skirt:
• Hand Wash.
• Line Dry.
Save this instruction manual for future
reference.
CONTENTS
Page:
1 Important Information
2 Warnings
❃Assembly:
3 Stand Assembly
4 Bassinet Assembly
4 Canopy Assembly
❃Special Information:
5 Replacement Parts
6 Replacement Parts Order Form
Bassinet Frame:
Wipe with damp cloth.
•
¤
• Model 10-440 Series:
- Tubular Frame
- Short Skirt
- Ball Casters
¤
¤
• Model 10-450 Series:
- Molded Frame
- Short Skirt
- Basket
- Deluxe Casters
• Model 10-460 Series:
- Molded Frame
- Long Skirt
- Deluxe Casters
1
Page 3
WARNINGS
ENGLISH
❃ DANGER! Do not use as a car bed!
Infant could be seriously injured or killed.
❃ Never leave baby unattended.
Always keep baby in view, even when sleeping.
❃ Do not use if baby’s weight exceeds
18 lbs. (8.2 kg.) or if baby can crawl or sit unassisted. Baby could fall out and be seriously injured.
❃ DO NOT carry Bassinet with
baby in it. Baby could fall out or be dropped and be seriously injured.
❃ DO NOT remove Bassinet
from stand with baby in it. Baby could fall out and be seriously injured.
❃ DO NOT attach or place toys
with strings in or around Bassinet. Strings can cause strangulation or choking.
❃ Do not push or pull Bassinet across
floors, rugs, etc. with child in it. Legs will weaken and collapse causing serious injury.
❃ Bassinet must be fully assembled
before using.
NEW ILLUSTRATION
❃ Keep Bassinet away from
stoves, heaters, campfires, fireplaces, stairs, open windows, and other hazards which can cause injury to your baby.
2
Page 4
ENGLISH
ASSEMBLY
For proper stand assembly, follow the
instructions for your model.
❃ Model 10-440 Series Stand Assembl y:
1 Using screws, attach four (4) cross
braces to one set of curved legs.
Do not over tighten screws.
2 Using screws, attach four (4)
cross braces and spacers to
second curved leg section.
Cross
Brace
❃ Model 10-450 & 10-460 Series Stand
Assembly:
1 Insert cross braces into side of leg with
larger hole and secure with screws.
Do not over tighten.
CAUTION: Inserting cross braces
in wrong side of leg (small hole side)
can cause cross braces to break
during use.
2 Using screws, attach four (4) cross
braces to second curved leg section
with screws.
CAUTION: Make sure cross braces
go into side of leg with larger
hole.
3 Hook one end of rod over
small indentation at end of
cross brace (A).
Large
Hole Side
Cross
Brace
Rod
3 With casters on floor, insert
ends of Cradle Support Rod
through holes in top of
curved leg section.
NOTE: Curved edge of
Cradle Support Rod
angled outward as shown.
must be
4 Screw knobs over ends of
Cradle Support Rod
until knob is tight against legs.
Hand tighten only.
Repeat steps 3 & 4 for second
curved leg section.
Cradle
Support Rod
4 Hook end of rod over opposite
side of cross brace (B).
Repeat steps 3 & 4 for opposite
end.
5 With casters on floor, insert
ends of Cradle Support
Rod through holes in top of
curved leg section.
NOTE: Curved edge of
Cradle Support Rod must be
angled outward as shown.
Make sure rod installed in
steps 3 & 4 remains hooked
on cross braces before
securing cradle supports.
A
Rod
B
Cradle
Support Rod
3
6 Screw knobs over threaded
ends of Cradle Support Rod
until knob is tight against legs.
Hand tighten only.
Repeat steps 5 & 6 for opposite
end.
Page 5
ASSEMBLY continued
ENGLISH
❃ Basket Assembly For Model 10-450 Only:
1 Snap sides of basket over both
bottom cross braces.
❃ Bassinet Assembly For All Models:
1 Straighten Bassinet frame legs
until lower curved section of legs
are nested in slots of floorboard.
❃ Bassinet Assembly continued:
5 Place Bassinet in stand.
NOTE: Bassinet floorboard
must rest on bottom of cradle
support rod.
6 Snap side skirt straps to top
cross braces.
7 Place mattress pad in Bassinet.
WARNING:
NEVER use Bassinet without
mattress pad as baby could
suffocate.
2 Snap skirt straps over Bassinet frame.
3 Pull skirt over frame.
NOTE: Be sure canopy
mounting brackets extend
through openings in skirt.
4 Snap skirt to floorboard.
❃ Canopy Assembly For All Models:
1 Push canopy brackets into canopy
mounting brackets.
2 Pull canopy down and over back of
Bassinet and secure Velcro® tabs.
To Remove Canopy:
1
Push in tabs on mounting brackets
and pull upward.
4
Page 6
ENGLISH
REPLACEMENT PARTS
PARTS LISTPRICE
A. Tubular Curved Leg Section (1)
(10-440 Series) (not shown)
$ 23.75
PART
A
A. Molded Curved Leg Section (1)
(10-450 & 10-460 Series)
B. Tubular Cross Brace (1)
(10-440 Series) (not shown)
B. Molded Cross Brace (1)
(10-450 & 10-460 Series)
C. Cross Brace Screws &
Washers (4)
D. Cradle Support Rod (1)
E. Cradle Support Knobs (2)
F. Short Skirt
(10-440 & 10-450 Series)
23.75
14.75
14.75
2.00
6.50
4.75
35.25
B
C
D
E
F. Long Skirt
(10-460 Series) (not shown)
G. Mattress Pad
H. Canopy & Canopy Frame
I. Non-Skid Feet w/Screws & Nuts (4)
J. Basket
(10-450 Series only)
K. Instructions & Parts Order Form (not shown)
40.25
11.50
19.50
3.00
9.75
Free
F
G
H
I
J
Sales T ax Chart
ARKANSAS Residents Add 6.5% Sales Tax
CALIFORNIA Residents Add 8.25% Sales Tax
$ .01 to $ 5.00 = $ 4.00
$ 5.01 to $ 50.00 = $ 5.00
$ 50.01 to $200.00 = 10% of Order Total
$201.00 and over = 5% of Order Total
Page 7
ENGLISH
¤
• Model 10-440 Series:
- Tubular Frame
- Short Skirt
- Ball Casters
¤
• Model 10-450 Series:
- Molded Frame
- Short Skirt
- Basket
- Deluxe Casters
REPLACEMENT PARTS ORDER FORM
Please fill out and return this form to address shown on back of page.
A. Tubular Curved Leg Section (1)$
(10-440 Series)
A. Molded Curved Leg Section (1)$
(10-450 & 10-460 Series)
B. Tubular Cross Brace (1) & Spacers (2) $
(10-440 Series)
B. Molded Cross Brace (1)$
(10-450 & 10-460 Series)
C. Cross Brace Screws & Washers (4)$
D. Cradle Support Rod$
E. Cradle Support Knobs (2)$
F. Short Skirt$
(10-440 & 10-450 Series)
F. Long Skirt$
(10-460 Series)
G. Mattress Pad$
H. Canopy & Canopy Frame$
I. Non-Skid Feet w/Screws & Nuts (4)$
J. Basket$
(10-450 Series Only)
K. Instructions & Parts Form F R E E
Subtotal Amount$
Sales Tax (see chart page 5)$
Shipping & Handling (see chart page 5)$
Outside USA (see add-on chart page 5)$
Total Amount of Order$
¤
• Model 10-460 Series:
- Molded Frame
- Long Skirt
- Deluxe Casters
**IMPORTANT**
We must have this information to process your order.
See label on Bassinet floorboard.
Model Number:
Manufacturer Date:
Charge to credit card Visa MasterCard
Card Number:
Expiration Date:
Cardholder’s Name:
Check Enclosed
Please make checks payable in U.S. currency to:
Century Products Company
SHIP TO:
Customer Name:
Street Address:
City, State, Zip:
Area Code:Telephone Number:
PM-0474AC 6/97
6
Page 8
ENGLISH
Send order with check, money order, or charge card number,
in an envelope to:
Century Products Company
9600 Valley V iew Road
Macedonia, OH 44056-2096
Attention: Consumer Relations Department
You put more than your trust in us.
™
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.