CenturionPro Silver Bullet, CP-3000, CP-4000 User guide

OWNERS MANUAL

The Original & Silver Bullet

cprosolutions.com
1 855 535 0558
[e-mail]

For more information or to watch our video tutorials visit cprosolutions.com

1

OWNERS MANUAL

The Original & Silver Bullet

2

cprosolutions. 1 855 535 0558

TABLE OF CONTENTS

Important Safety Information 4

Machine Assembly 5

Cover Assembly 6

Double Bag Kief Collection System 7

Leaf Collector Assembly 8

Hopper Assembly 9

Blade Removal 10

Cleaning the Original & Silver Bullet 10

Leaf Collector Cleaning 11

Machine Maintenance 12

Quantanium Coated Non-Stick Tumbler 13

Warranty Information 14

Frequently Asked Questions 15

Additional Assistance 16

Original & Silver Bullet Machine and
Leaf Collector Specifications 17

For more information or to watch our video tutorials visit cprosolutions.com

3

IMPORTANT SAFETY INFORMATION

IMPORTANT

This document refers to the CenturionPro Solutions Original & Silver Bullet
automated trimming systems.

The Original & Silver Bullet are high-speed trimming systems, requiring that
specific safety precautions are practiced during operation to reduce the risk of
personal injury. Improper use of The Original, Silver Bullet, or any Centurion Pro
trimming machine, may cause serious or fatal injury. Please ensure you read the
operations manual and warning notes before using the Original or Silver Bullet.

Do not lend out or rent your Original or Silver Bullet without this operating
manual. A first time user should obtain proper instruction prior to use.

GENERAL

• Do not move, disassemble, clean or inspect the trimmer while the power is still connected to the machine.

• Replacement parts are specific to The Original & Silver Bullet and must be purchased from an authorized

dealer only. Substituting factory parts with non-approved third-party replacements may result in damage to
the machine or bodily harm.

• Keep all individuals a safe distance from the work area. Do not operate the machine around children.

• Do not remove safety labels. Replace any and all labels if they become damaged or obscured.

CONNECTION

• As with home appliances, The Original & Silver Bullet must be used in connection with a properly grounded

receptacle.

• Never plug in or power up your trimming machine if the protective shrouds are removed.

• Do not use extension cords over 8m (25ft) in length to power the Original or Silver Bullet.

OPERATION

• The initial set up will show assembly instructions to unpack and set-up your machine.

• Your bed bar blade has been factory set to cut perfectly. Please do not adjust your blade until it is time to

clean the machine. Also, please watch the video tutorial located on our website on how to adjust your blade
before attempting.

• Safety glasses should be worn at all times while operating The Original or Silver Bullet.

• Do not operate any trimming machine while tired or under the influence of medication, drugs or alcohol.

• Do not put anything other than plant material into the tumbler. Doing so may cause damage to the tumbler,

the machine or result in bodily harm.

• Operate the trimmer in a well ventilated area in order to prevent overheating.

MAINTENANCE

• Never leave The Original or Silver Bullet system running unattended.

• Never conduct maintenance or cleaning while the machine is plugged in.

• Do not modify or adapt any part of the trimmer or its accessories. Doing so may cause irreversible damage

to the machine or result in bodily harm.

4

cprosolutions. 1 855 535 0558

MACHINE ASSEMBLY

STEP 3

INSTALL

COVER

STEP 2

INSTALL

UPPER

FRAME

Tighten Four Sealing
Bolts & Washers

Cover

Brush

Requires Cleaning

See Page 10

Tumbler

110V
220V

Upper Frame

North
America

Australia
EU

STEP 1

PLACE

TUMBLER IN

GROOVES

Tumbler O-Ring

Bed Bar Blade &

Magnet Bar

Requires Cleaning

See Page 10

Cutting Reel

Requires Cleaning

See Page 10

1 x #2 Phillips Screwdriver
1 x 3/32" T-Handle Allen Wrench
1 x 5/32" T-Handle Allen Wrench

Lower Frame

Motor

Shroud

(area behind cutting reel)

Requires Cleaning

See Page10

TOOLS REQUIRED

1 x 1/8" T-Handle Allen Wrench
1 x 3/16" T-Handle Allen Wrench
1 x 3/8" Wrench

Blade
Adjusters

Note the longer end of the

TUMBLER when re-installing

STEP 4

INSTALL

SKIRT

(INSTALLED ON THE

MACHINE WHEN

SHIPPED)

For more information or to watch our video tutorials visit cprosolutions.com

5

COVER ASSEMBLY

It is UNSAFE to operate the ORIGINAL or SILVER BULLET TRIMMER without COVERS!

STEP 1

Attach the BEARING COVER to the ORIGINAL
or SILVER BULLET

Bearing Cover

2 x Washers

2 x Bolts

STEP 2

Attach the BELT COVER to the ORIGINAL
or SILVER BULLET

4x Washers

4x Bolts

Belt Cover

Bearing Cover

Belt Cover

6

cprosolutions. 1 855 535 0558

TRIPLE-BAG KIEF COLLECTION SYSTEM

Kief is becoming wildly popular due to the rise of extractions. Unfortunately, machines that require
sprays can contaminate and destroy your Kief, therefore making it virtually useless.

Thankfully, CenturionPro offers an optional non-stick Quantanium coating on the tumblers. This means
no spray is needed so your Kief remains 100% pure and usable. To further benefit growers, we devel­oped a new triple-bag filtration system. This system will assist with Kief collection, separating it from
your trim. This allows you to safely and easily collect the precious trichomes for further processing and
profits.

With your machine, you will see that you have a black mesh bag, a white nylon bag, and an outer cloth
bag. The black bag goes inside the white nylon bag, which then goes inside the white cloth bag.

HOW IT WORKS

The green leafy trim will collect in the new
inner black bag.

Only the Kief makes it through the black bag
and collects in the outer mesh bag.

Outer cloth bag catches any Kief that may
pass through the micron white bag.

Turn off the machine and remove the inner
bag and then extract Kief. ENJOY!

The bags are easy to wash with a pressure washer using cold water. The bags can also be put through
the washing machine, but it is recommended to be run through on a cold delicate cycle only.

For more information or to watch our video tutorials visit cprosolutions.com

7

LEAF COLLECTOR ASSEMBLY

STEP 1

ATTACH BAG

SYSTEM TO LEAF

COLLECTOR

4” Flex Hose

Secure with 4”
Hose Clamps

STEP 2

ATTACH 4" FLEX

HOSE TO THE

DIVERTER AND

ORIGINAL OR

SILVER BULLET

110V
220V

Please disregard hole on

top of diverter, the suction

will hold the diverter in

place and no screw is

needed to secure.

North
America

Australia
EU

Secure with one 4”

hose clamp

Zipper

Leaf Collector Bag System

Requires Cleaning

See Page 11

Secure with

4” hose clamps

Leaf Collector

Requires Cleaning

See Page 11

8

cprosolutions. 1 855 535 0558

HOPPER ASSEMBLY

STEP 1

ASSEMBLE

THE FRAME

Inward

Hopper

Bag

Opening

STEP 2

SECURE THE

HOPPER BAG TO

THE FRAME

Frame (Back)

Ensure the
OPENING and
FRAME (front) match

STEP 3

CONNECT THE

HOPPER TO THE

MACHINE

Ensure the RODS are

facing inward. Secure with

1/4" BOLTS, WASHERS

& LOCKING NUTS

Ensure the Frame and OPENING

match the ORIGINAL & SILVER BULLET

machine exactly

Frame (Front)

For more information or to watch our video tutorials visit cprosolutions.com

9

BLADE REMOVAL

For optimal performance and life, the BLADES and the MAGNET BARS must be removed and cleaned every few hours of operation.

IMPORTANT NOTE: Your bed bar blade has been factory set to cut perfectly. Please do not alter the settings of your machine.

You might notice slight contact between your rotating cutting reel and the flat bed bar blade - this is normal.

Remove BLADE

then MAGNET BAR

carefully!

BLADE

Clean BLADE and MAGNET

BAR with a utility knife.

Wipe clean with acetone.

CLEANING THE ORIGINAL & SILVER BULLET

For optimal performance and life, the components must be cleaned every 3 to 4 days of use.

Clean with pressure-washer at 1500-2000 PSI.

Hot water, fan spray setting.

Run the Original or Silver Bullet for 15 minutes

after washing. Allowing components to dry.

Clean the Brush using

pressure washer

Clean the length of the

CUTTING REEL and

SHROUD of

all debris

Avoid
water
on the

10

cprosolutions. 1 855 535 0558

LEAF COLLECTOR CLEAN-

(Reverse Thread)

For more information or to watch our video tutorials visit cprosolutions.com

11

MACHINE MAINTENANCE

The Original & Silver Bullet are precision machines. It is essential that it is operated and maintained with
this in mind. The machine has been adjusted and tested by the manufacturer prior to shipping to ensure
optimal performance. However, it is important to inspect the machine at initial start-up and after each
use to ensure that no damage or plant material build-up has occurred and that the blades spin freely.

In addition, it is highly recommended to clean the machine at the end of every use. This ensures that the
blades are kept lubricated and that resin does not build-up and affect performance. This is especially
important if the machine has been stored for an extended period of time.

Due to the Quantanium coating on the tumbler, The Original & Silver Bullet do not require any
lubricants or sprays. The application of which will only damage or alter the final product and will not
assist with the cutting process. In fact, it may hinder it. Cold water is recommended to spray on blades
during harvest.

We recommend taking one or two links out of the belt after 50 hours of use. If you notice the tumbler
rotation slowing down, then this is a sign of the belt becoming loose. Once you notice this happening,
please remove a link or two until it is tight again.

12

cprosolutions. 1 855 535 0558

QUANTANIUM COATED NON-STICK TUMBLER

WHAT IS QUANTANIUM?

Quantanium is a multi-coat non-stick
coating that incorporates a unique
mix of titanium particles. These
particles are blended into the coating
that stands up to almost anything
and makes the tumbler resistant to
scratching. The outstanding release is
provided by silicone, not PTFE. All of
our Quantanium coated tumblers are
made without PTFE/PFOA.

WHY DO WE USE QUANTANIUM?

Higher Potency Harvest

The non-stick properties of the Quantanium tumbler prevents precious trichomes from adhering the tumbler
surface without the need for sprays. This results in the end product having a better visual appearance while
maintaining its strong natural aroma and flavors. Overall, this results in a better-quality end product as the
natural properties are preserved during the harvesting and trimming processes.

Save Time = Save Money

Another benefit of the Quantanium tumbler is that it speeds up the harvesting process since no downtime
is required to stop and clean the tumblers throughout the day. A simple whip down with a cloth and warm
water will remove the small amount of residue that may be present.

HOW TO CLEAN THE QUANTANIUM TUMBLER

When cleaning the Quantanium tumbler, we recommend that you DO NOT pressure wash it. This will
cause the coating to flake and come off. Treat the tumbler the same way you would treat a non-stick pan at
home by letting it soak in warm, soapy water. After letting it soak, rinse the tumbler and then wipe it with a
soft, clean cloth.

In extreme cases, residue can be removed by a thorough cleaning with 3 TBSP of vinegar, 1 TBSP liquid dish
detergent and 1 cup of water. Apply with sponge or plastic scrubbing pad, then completely rinse with warm
water.

DO NOT use automotive degreasers.

While the Quantanium surface is designed to stand up to rough treatment, non-stick surfaces last longer if
you are careful not to rub or touch them with metal surfaces or sharp objects. Remember that sensible care
of your Quantanium tumbler will ensure it lasts for many years.

For more information or to watch our video tutorials visit cprosolutions.com

13

!! IMPORTANT !!

WARRANTY

YOU MUST REGISTER YOUR TRIMMER WITHIN 30 DAYS OF YOUR PURCHASE

You have just made a smart decision by purchasing the best trimmer in the world. Failure to register your machine within 30

days of purchase will void your 10 year warranty. Protect your investment. This process will only take 3 minutes to complete.

TO REGISTER GO TO:

cprosolutions.com/warranty

WARRANTY TERMS & CONDITIONS

CenturionPro Solutions (the manufacturer) will repair or replace,
without charge, any parts proven defective in material or
workmanship for a period of 10 years on the Trimming Machine
and 3 years on the Leaf Collector.

The warranty period will begin on the date the machine(s) is
purchased by the initial purchaser. Product or component
warranty defects can be remedied at any authorized service
dealer, or directly at the manufacturer. Any service work
performed, and deemed valid due to a defective part, will be free
of charge. CenturionPro Solutions reserves the right to use any
manufacturer-approved replacement part for the warranty repair.

If warranty repair is required, please contact the manufacturer at
1-855-535-0558 or
[e-mail] and provide the following
information:

1. Model and serial number

2. Proof of purchase date

3. A copy of the original Warranty Registration Card or Online
Submission

4. Details of the defect or problem (include photos and videos)

The machine or defective part then must be returned to the
manufacturer for analysis or replacement at the cost of the owner.
Parts deemed to be covered under the warranty will be provided
for free excluding shipping costs.

Do not return the machine to the place of purchase for repair
or warranty claims, unless you have been authorized by
CenturionPro Solutions to do so. The place of purchase can only
sell replacement parts and will not repair any warranty issues,
unless it is noted as an authorized repair dealer and has been
authorized to work on your machine.

You may be denied warranty coverage if your machine has failed
due to any of the following:

• Product abuse

• Product neglect

• Improper maintenance

• Improper electrical connection

The manufacturer assumes no risk and shall be subject to no
liability for damages or loss resulting from the specific use or
application made of the product. In no event will the manufacturer
be liable for any special, incidental or consequential damages
(including loss of use, loss of profit and claims of third parties)
however caused - whether by negligence of the manufacturer
or otherwise. If you have any questions regarding your warranty
rights and responsibilities, please contact the manufacturer.

CenturionPro trimming machines are intended for use on legal
aromatic herbs and hops. Please check all municipal, provincial/
state and federal laws and regulations before using these
machines. CenturionPro Solutions does not promote or condone
the use of these products in any way that may be deemed illegal.
Allow only persons who understand this disclaimer to operate the
machines.

• Normal wear

• Accidental damage

• Unapproved modifications

14

cprosolutions. 1 855 535 0558

FREQUENTLY ASKED QUESTIONS

HOW EASY IS IT TO CLEAN?

Our machines can be taken apart and cleaned within 10-15 minutes. There are four screws to remove the top cover, pressure
wash the machine and then you’re good to go. Our Quantanium coating is similar to a Teflon pan you would have at home
which is even easier to clean. Just submerge in warm water, let soak and then wipe with a soft cloth. We recommend to clean
every 4-6 hours of use, but it depends on your strain. We know the importance of down time during a harvest so we wanted
to make this process extremely quick and easy.

WHAT IS THE MAINTENANCE LIKE?

We have 15 video tutorials on our website with how to fully service your machine. These step by step videos make it very
easy to do everything that will be necessary to maintaining your machine. All parts can be ordered right through the website

and will be delivered to you within days.

DO YOUR MACHINES TRIM WET OR DRY?

Our trimmers have the capability of doing both. We offer wet tumblers for wet trimming and dry tumblers for dry trimming.
This is a major benefit because you can purchase one machine, with an additional tumbler and now you have the capabil­ity to trim wet or dry flowers. Our dry tumblers have a smaller cutting surface than the wet. If you were to run dry product
through a wet tumbler, you would have excess loss of flowers. Keeping the yield high is the biggest advantage to having a

specific tumbler for both methods of harvesting, wet or dry.

ARE YOUR MACHINES BUILT TO AN INDUSTRIAL STANDARD?

We do not compromise quality for cost savings. All CenturionPro Solutions machines are composed of the highest quality
materials available in North America and each machine is put through a comprehensive quality control inspection. We only
use brand name components in the build out of our machines which enables us to have the comfort in giving you a 10 year

warranty. With proper maintenance these machines will last you well over a decade.

WHAT IS THE OPTIMAL ROOM TEMPERATURE TO TRIM?

Use your CenturtionPro machine in 50-60 °F (10- 15 °C) room to get the best performance. Cooler temperatures prevent
excessive sticking to machine components.

MY MACHINE IS NOT WORKING LIKE IT DID WHEN IT WAS NEW, WHY?

Make sure to fully clean the machine and blades. If the machine is clean, the blade is adjusted properly and the leaf collector
has full suction, then you machine should trim exactly like it was new.

MY PRODUCT IS NOT MOVING THROUGH THE TUMBLER, WHY?

You need to consistently feed the tumbler so it is about 50%-60% full at all times. If the product won’t pass through, try tak­ing the plastic top cover off and you should instantly see it begin exiting the tumbler. You can also prop the back wheels up a
bit to increase the angle the machine is on. Some strains are heavier and will need more of an angle to exit.

WHY IS MY PRODUCT STICKING TO THE INSIDE OF THE TUMBLER?

If you find that product is sticking inside the tumbler, first clean the tumbler. When you reassemble it, make sure the top
brush bristles are poking through 1/4" into the tumbler.

HOW MUCH PRODUCT SHOULD BE IN THE TUMBLER AT ONE TIME?

The tumbler should be 50-60% full when trimming.

For more information or to watch our video tutorials visit cprosolutions.com

15

ADDITIONAL ASSISTANCE

You are about to enjoy the experience of CenturionPro Solution’s automated trimming machine.

For critical information on assembly, cleaning, care, maintenance and how to operate your machine
correctly, please review this manual and check out our video tutorials, which are posted on our website
for your ease and convenience.

Go to www.cprosolutions.com/video-tutorials for our video tutorials.

These tutorials provide how-to assistance on the following aspects of machine maintenance:
If for some reason you can’t find an answer to your question online or in your manual, please do not

• Straightening the Tumbler/Drum

• Skirt Assembly

• Removing and Replacing The Belt

• Replacing The Motor

• Blade Removal and Cleaning

• Complete Unit Assembly

• Replacing the Bearings

• Bucking Your Product

• Trimmer Cleaning and Maintenance

• Replacing The Tumbler/Drum Ring

• Sharpening The Blade

• Cleaning The Blower

• Adjusting The Blade

• Packing The Bearings

• Replacing The Pulleys

hesitate to contact us.

We are open Monday through Friday from 9AM to 5PM PST.
Phone: [phone]
Filling out the “Contact Us” form on the website, is another sure way to get in touch.

16

cprosolutions. 1 855 535 0558

ORIGINAL & SILVER BULLET MACHINE AND
LEAF COLLECTOR SPECIFICATIONS

ORIGINAL & SILVER BULLET TRIMMER

Input Voltage 7 Amp - 110V NA

3.5 Amp - 220V EU/AUS

Dimensions 30" L x 13" W x 28" H

Weight 90 lbs

Reels 1

Blades Per Reel 11

Cuts Per Minute 37,500

Tumbler Diameter 6.5”

Number of Tumblers x1

Human Trimmer Replacement 20 people

Processing Capacity Dry: 16-20 lbs/hr

Wet: 80-100 lbs/hr

Warranty 10 year

ORIGINAL & SILVER BULLET LEAF COLLECTOR

Input Voltage 15Amp - 220V NA/ EU/

AUS

Dimensions 18.5" L x 20" W x 20" H

Weight 70 lbs

Horsepower 3 hp

Airflow Capacity 2750 CFM

Warranty 3 year

For more information or to watch our video tutorials visit cprosolutions.com

17

cprosolutions.com

1 855 535 0558

[e-mail]