Centrix MVP-100 User Manual

Download

Page 1

CENTRIX MVP-100

User Manual

Thank you for purchasing this product.

Please read the manual carefully before use.

SITECSystem Co., Ltd

www.centrixclub.com

Table Of Contents

• Thank you notes

• Online registration Info.

• Copyrights notice

• Trademarks

• Limited Liability

• Safety Instructions

1. Before Using

2. Getting started

3. Music Box

4. Video Box

5. Image

6. Snapshot

7. Voice Recorder

8. File Manager

9. Settings

10. Firmware Update

11. FAQ

12. Specifications

13. Warranty

14. A/S information Warranty Notes

Page 2

Thank you for your CENTRIX MVP-100 purchase. We will do our best to compensate to customer’s support with the topon-top product. This guide will ensure that you get the most functions of MVP-100 with conveniences. Please do read through this guide before using and contact our customer support center for any problem in use.

Thank you notes

•You can receive continuous services through online register of CENTRIX Club (www.centrixclub.com).

•This site provides you diverse information and news of product.

•By online registration, you can receive diverse event or product information provided by CENTRIX Club.

•Using Firmware Update from website, you can receive continuous service for product improvement.

•Diverse of customer questions are answered and online support is available.

Online registration Info.

• Using this manual if you make play, copy, distribution of the software, audio and video which have an intellectual property are protected by copyright & international laws. User are responsible for infringement of copyright or intellectual property.

• CENTRIX is the registered trademark of SitecSystem Co., Ltd.

• Microsoft Windows 98, Windows ME, Windows 2000, Windows XP is registered trademarks of Microsoft Corporation.

•Limited Liability on improper use : Manufacturer, Importer, Distributor, Agencies shall not be liable for product damages caused by misuse, abuse, improper handling, infringement of literary property by photographing & portrait using this product. The manufacturer shall not be responsible for injury and damages caused by improper uses in out of standard or conditions.

•Limited Liability on loss of data : Users should keep separately data stored on disk media, video file, photo file to avoid operating error, failure of unknown cause, loss during A/S. Manufacturer, Importer, Distributor, Agencies shall not be liable for damages caused by loss of data stored on the product.

•Limited Liability on alteration of functions : The manufacturer, SitecSystem Co., Ltd may change the specifications or S/W without individual’s consent or prior information.

Trademarks

Limited Liability

Page 3

Safety Instructions

Visual Safety

• Watching video files with narrow screen can cause a visual damage. Do not use for a long time continuously.

Safety while walking

• Reduce volume of headphone or earphone while walking or at street side, pedestrian’s crosswalk because it can cause damages.

Safety during driving

• Do not use headphones or earphones while cycling, driving such as motorized vehicle & roller skating.

• It can be against the law in some regions to use headphones or earphones during driving.

• Do not leave this product in a car. It may cause damages to the product and user according to the ascending or descending of in car temperature.

Hearing Safety

• Do not use headphones or earphones at high volume. Auditory injury can be caused.

• Reduce volume or stop using the player if you experience a ringing in your ears.

• Hearing for a long time can cause auditory injury.

Safety in public transportation

It may cause accidental damage using in bus, subway, railway such as public transportation by caught earphones between the doors. Listening with loud volume while using public transportation may cause inconveniences to other people. To protect other’s privacy, please use with low volume while using public transportation.

Prohibition of expose to water, humidity, rain, beverage, medicine and cosmetic

This player, as a electronic product, is easily damaged by water. Do not power on if the player gets wet , then mop up the player immediately and go get A/S.

Do not use water or other chemicals to clean the player. Use dry mope or towel.

Prohibition of place objects inside

It is prohibited to put metal or inflammable objects inside the player for safe usage. It may cause inferior of player.

Prohibition of reassembling, remodeling

Do not disassemble or modify. It may cause breakage, inferior or accidental damage.

Precaution against drop or impact

Do not drop or put strong impact through stepping on the product. It may cause breakage or inferior.

Safety Instructions

Page 4

Safety Instructions

Precaution against heavy lading

Do not place heavy objects on the device to avoid breakage.

Precaution against fire

Keep out of direct ray of light or such places where there are heating equipment. Such places may cause player inferior or breakage.

Proper data backups

Keep your data separately which is stored in this player unless it may cause data deletion during inferior or repair. Manufacturer, Importer, Distributor, Agencies shall not be liable for data damages caused by user.

Use only proper accessories

It may cause accidental damage if you use another accessories not provided with this player.

Prohibition of chemicals

Do not peel the surface using chemicals or detergent.

proper

Precaution against fire

Power off immediately and detach the adapter if smoke, smell or noise such unusual thing happens.

Precaution against magnetic

Magnetic may bring in damage in your player.

Power management

Do not overload a single power circuit. It may cause fire or heat.

Precaution of thunder and lightning

Unplug the power use when it thunders or lightning flashes. Electric shock or breakage may cause.

Using of approved battery

Use the battery belonged to this product or manufacturer providing one for safe usage.

Using of approved adapter

Use the AC power adapter belonged to this product for safe usage.

Safety Instructions

Page 5

Precaution against humidity or dust

• Do not leave the player where th ere are much humidity and dust.

Precaution against using of infants & children

• Keep battery & adapter away from touching or sucking of infants & children. It may cause accidental damage to infants and children.

Precaution against using battery, adapter, main body

• Keep the player away from water and excessively humid areas.

• Do not handle with wet hands, it may cause accidental damage and receiving of electric shock.

• Keep away from harsh environments including impacting, heating, sauna or disassembling with sharp thing unless it may cause explosion.

• Do not handle the charging terminal of adapter or battery with metals unless it may cause product inferior or damage.

Safety Instructions

1-1. Accessories & Components

1. Before Using

MVP-100 Battery Plastic Cover

Earphone

Remote

Controller

AC Adapter

Carrying

Case

USB Device

Cable

(Mini B)

USB Host

Jack

(Mini A)

Application

User Manual A/V Cable

Page 6

1. Before Using

1-2. Minimum System Requirements

* Under Window 98 system, you should install additional driver for recognition of USB.

* Media Converter cannot be installed in Window 98 system.

USB 1.1 or USB 2.0 required

Interface

Internet Explorer 6.0 or above

MS Windows Media Player 9

MS Direct X 9.0b or above

(minimum requirements)

Multimedia

(Must have

Utility for

Media

Converter)

Divx 5.1.1. or above

Windows 98,SE,ME,2000,XP

Operating

System

256MB or above

(512MB Preferred)

Memory

Pentium III or above

(Pentium IV Preferred)

CPU

While data transmission : It may cause HDD error if the USB cable is left out while data transmission/reception from PC or from external device through USB Host function as well.

Precaution against drop or impact : It may cause breakage by external impact or drop. Avoid accidental impact or drop against the product.

Precaution

against HDD

handling

Back-up of the stored data before formatting, if you want to format HDD at your pleasure.

Precaution

against HDD

format

In case of disk breakage, it is not detected as external storage device or files are not visible in each menu of system.

In this case you should ask A/S.

Disk breakage

Check through disk error test provided by Window program if it is a HDD error.

HDD error

It is necessary to format this product with FAT32 file system.

It is not detected in this product to format as NTFS file system under Window base PC.

1. Before Using

1-3. Using HDD

Page 7

2. Getting Started

2-1. Name of parts

Top

Bottom

Front

③

④ ⑤ ⑥

⑦

⑧ ⑨

⑩

①

②

Built-In MIC Built-In 2 Way Speaker Camera Shutter Power On/Off Menu (Function Setting) Power, HDD, Recharge LED

Vol up/down, REW/FF SELECT (Straight Push) Stop/Escape Play/Pause Cradle Interface

Remote Control/Earphone Jack A/V Jack USB 2.0 Device Jack USB 1.1 Host Jack Camera Lens Camera Mirror

Rechargeable/ Removable Lithium Polymer Battery Camera Flash Battery Lock DC 5V Jack

①

②③④ ⑤ ⑥

⑦

⑧

⑨

⑩

Left Back

Right

2-1. Name of parts

Right

Page 8

2. Getting Started

2-1. Name of parts

Earphone Jack Volume Up Volume Down STOP REW/ Previous Song FF/ Next Song Hold key Play/ Pause

Remote Control

①

②③④ ⑤⑥

⑦

⑧

Attaching/Detaching battery

2. Slide the battery to the arrow direction till it locks into the place precisely.

*Detaching the rechargeable battery

1. Cover 4/3 of battery onto the back side of main body

And fix it.

*Attaching the rechargeable battery

2. Slide 4/3 of the battery out of the player and lift it up then it will release.

1. Press the lock to release the battery and

slide 4/3 of it out of the

player.

2-2. Connecting & Installation

2. Getting Started

Page 9

1. Connect the Remote control to the Audio jack.

2. You can connect earphones directly to the player.

Connecting Remote Control & earphone

2. Getting Started 2. Getting Started

2-2. Connecting & Installation2-2. Connecting & Installation

Connecting external speaker

1. Connect the external speaker to the Audio jack.

2. Speaker connection line is not provided.

Page 10

1. Power on the player. Wait until the main screen is displayed.

2. Conn ect to a PC with USB 2.0 cable (Mini USB B, long cable). When it is connected to PC, “USB Device Connected” message will pop-up on the screen

of the player.

3. Open USB port which is on the left side and connect USB 2.0 cable (Mini USB B, long cable) with USB 2.0 Jack which is on the lower end of player.

4. When it is connected to the main body, it is detected as a mass storage on PC. If no power source is input, the USB is not detected. Power on when it is connected to PC.

5. When it is connected to PC, it is detected as a mass storage, MVP-100.

6. yo u can transfer movie, music, image file from PC to audio box, Video, Image folder in the player.

• You should connect to PC with USB 2.0 port.

• This player has USB 2.0 & USB1.1 Host Jack. Do not use with connecting above two Jacks at the same time.

• Under Window 98 system, you should install additional USB

driver for recognition of USB.

2. Getting Started

2-2. Connecting & Installation

PC Connecting with USB 2.0

2-2. Connecting & Installation

2. Getting Started

Separation from PC

1. If you want to separate the connection between player and PC, click the USB connecting icon from the menu icon which is shown right side in the below end of PC then “Hardware safely detachable” message will pop-up.

2. Select “USB mass storage de vice” and press ”Stop”.

3. Select “ Toshiba MK2004GAL USB Device” and select “ Hardware device stop” message from menu.

4. Be sure to che ck “ Hardware safely detachable” message on PC.

5. You can sep arate this player with PC.

Hardware safely detachable

Page 11

1. Connect the adapter to the player’s DC Jack which is on the lower end of the right side from the front of player.

2. If the LED which is on the lower end of the front illuminates with red color, charging is in processing.

3. The LED light will change into green color when charging is complete.

4. The LED light will turn-off when the adapter is detached.

Connecting adapter and charging

2. Getting Started 2. Getting Started

Connecting TV

1. Connect A/V cable to the image input terminal of TV. Yellow is Video, White is Audio left channel, Red is Audio right channel.

2. Connect A/V cable to the end of A/V Jack which is on the lower end of the left side from the front.

3. Set the TV setting as Line-in .

4. When you power on the player, menu icons will be displayed on TV screen and you can enjoy video file by setting TV screen.

5. If you pull out the A/V cable from the player, t h en you can enjoy video file on the LCD screen again.

6. If you stick A/V cable to the player while screen playing on built-in LCD, then there is no output on LCD.

2-2. Connecting & Installation2-2. Connecting & Installation

Page 12

2. Getting Started

2-2. Connecting & Installation 2-3. Basic Function

2. Getting Started

< USB Flash Memory Drive>

1. Conn ect USB 1.1 Host cable (Mini USB A, short cable) to USB storage device (USB Flash Memory Drive).

2. Open USB port which is on the left side and connect USB Host cable (short cable) with USB Host Jack which is on the lower end of player.

3. When it is connected to the main body, it is detected as a mass storage (B: device) on PC.

4. Transfer, save, deletion of file is available at File Manager menu.

5. Conn ect two cables each other if certain product is not available to connect to USB 1.1 Host cable (short cable).

Connecting external storage to USB OTG : USB1.1

Main Menu

FunctionMenu

Setting the functions

Setting

Managing external storage

using USB Host

File Manager

Recording voice

Voice Recorder

Taking pictures

Snapshot

Playing image files

Image

Playing video files

Video

Playing music files

Music

* Precaution

• This player has USB 2.0 & USB1.1 Host Jack. Do not use with connecting USB 2.0 and USB1.1Host Jack at the same time.

• Separate application needed digital camera or various drives appeared Multi Card Reader, Security function applied USB Storage device is not recognized in this player.

Page 13

2. Getting Started

2-3. Basic Function

2. Getting Started

Power On/Off

2-3. Basic Function

Name & functions of buttons

Button Functions

• Press when power on/off.

• Press about 3 seconds to make power on/off

• Use the MENU button to go back to setting screen.

• If you press MENU button during playback mode, it will shift to circumstance setting screen of playing file, after setting it, press

■/ESC key for shift to playback mode.

• Use Play/Pause button to play music/video file and you press again to pause play of

music/video.

•Use ■/ESC key to pause playing (music, video, snapshot) and transfer to upper screen. Use ■/ESC key to transfer to upper menu.

• Press shutter button a bit long to shift to Snapshot mode. It will not operate when it is connected to PC with USB cable.

Play

STOP

Button Functions

1. Press power button about 3 seconds to make power on

2. Hard disk LED (middle LED) is on and then Power LED (top LED) is on

3. Opening Image is displayed and then the main menu is displayed.

1. Press power button about 3 seconds to make power off.

2. Stop all functions before you shut off the player.

1. Ending Image is displayed and then the

player is off.

Page 14

2. Getting Started

2-3. Basic Function

3. Music

Navigation Button

3-1. Music Playback Screen

Music Player Display

•셋팅화면으로 바로 나갈 때 사용합 니다.

•재생모드에서 메뉴버튼을 누르면 해당재생파일에대한환경설정화 면으로 전환되고 원하시는 환경모드 설정 후 ■/ESC키를 누르면 재생모 드로 전환이 됩니다.

•제품의 기능 작동 시(음악, 동영상 플레이나 사진 찍기 등) 정지버튼을 누르면 기능이 정지 되고 바로 상위 화면으로 이동합니다.

• 해당메뉴에서 상위 메뉴로 이동 시 사용합니 다.

• 셔터를 오래 누르면 바로 사진 찍기 모드로 이동합니다. 단 PC와 USB로연결시작동되 지 않습니다.

During file navigation: Transfer to down

direction.

While music/video file playing: Decreases the

volume.

While Photo viewing: Rotates the photo. Snapshot: Set the setting value.

VOL -

While playing: Playback of next song for music, next frame for video, next image for photo.

Snapshot: Use FF button for correction of setting item.

File Manager: Use FF button to shift Device & Host.

(press the button from above directly)

Playbacks selected file. Transfers to selected folder. Watching video: Selects screen swift function. Listening music: Changes Equalizer function.

Select

During file navigation: Transfers to upper direction.

While music/video file playing: Increases the

volume.

While Photo viewing: Rotates the photo.

Snapshot: Set the setting value.

VOL +

File playing: Playback of previous song for music, previous frame for video, previous image for photo.

Snapshot: Use REW button for correction of setting item.

File Manager: Use REW button to shift Device & Host.

REW

Button

Functions

Button

• Below functions are realized by pressing Navigation button t o d esire d direction.

You can listen stored music file (MP3, WMA, OGG etc) through music player.

Equalizer12

Playback mode11

File format (mp3, wma etc)10

Duration of playback9

File name of next Song8

Volume7

Balance indicator of Right & Left6

Transfer Rate (Bit rate)/ Sampling (Sampling Rate)5

Time of processing4

File name3

Name of Artist2

Song Title1

Page 15

3. Music Box

3-2. Playing Music File

3. Music Box

File Playback

Play stop

Press ■/ESC key to stop playback. Then you will enter into Music directory and you can select song you would like to listen and playback.

POWER ON

Press POWER button for Power on.

Music Menu Selection

Transfer to navigation button and select Music and click. By selecting, the icon will be indicated.

Music File Selection

Put cursor on the file you would like to playback from the folder under Music and click. By selecting, the icon will be highlighted

Music File Playback

If you press the click button, music file will be played. For battery power saving, LCD screen will be powered off in seconds and file playbacks continuously

3-2. Playing Music File

Music Player Display

Volume Control

Play /Pause

Play Next/ Previous File

Damaged/Unplayable File

재생 불가 파일

File Deletion

Use Volume +. – of Navigation button while music file playback and volume status will be indicated as a number in the top right of the screen.

Use Pause button to pause the music file playback and press the button again to resume the playback.

Press ◀ or ▶ buttons to play previous/ next music file while playing.

If selected file is not a playable or a damaged one, then “This file is damaged or not playable.”message will be shown on the screen and it returns to the folder again.

To delete one file, put cursor on the file and press Menu key shortly. Select as “delete’ and then press ‘select’button, the file is deleted.

◀▶

Page 16

3. Music Box

3-2. Playing Music File

Music Player Setting

Equalizer Setting

ID Tag information Display

Press Menu While Playing

If you press ‘Menu’ button while playing then it is shifted as the circumstance setting mode of the current file.

Settings

Set the Audio setting function or Play mode suites to user’s taste.

Returning to Play mode

After circumstance setting is completed, press ■/ESC button to switchover to the playing

If you press ‘Select’ button while music file playing then it is shifted as Equalizer preset setting.

ID TAG contains Artist name, title info. The player supports standard ID Tag version 1,2.

* Other function is same as in 3-2. Playing Music file.

You can make lists of music file and listen them consecutively.

3. Music Box

3-3. Using Playist

POWER ON

Press POWER button for Power on.

Music Menu Selection

Transfer to navigation button and select Music and click. By selecting, the icon will be indicated.

Add to Playlist

Select music file and click MENU button shortly. You will be asked whether you want to add to Playlist. Use direction key to select YES button then the file will be added to the list.

Deletion of file in Playlist

Select file to be deleted and Click MENU button shortly. You will be asked whether you want to delete file from Playlist. You can choose Yes. And then the file will be deleted from Play list. But the file is only deleted on the Playlist not on the original folder.

Playing Playlist

Select file under the play list and the files in Playlist is played consecutively.

Page 17

4. Video Box

4-1. Video Playback Screen

4. Video Box

4-2. Playing Video File

Video File Playback

Elapsed time

Total playing time

01:23:24

01:51:14

Title : rooms.avi

File name

• You can watch video file (MPG, AVI etc) stored in Video folder through Video Player.

• You can watch WMV file which are not played in this player through conversion with media converter.

Play stop

Press ■/ESC key to stop playback. Then you will enter into Video directory and you can select song you would like to listen and playback.

POWER ON

Press POWER button for Power on.

Video Menu Selection

Transfer to navigation button and select Video and click. By selecting, the icon will be indicated.

Video File Selection

Put cursor on the file you would like to playback from the folder under Video and click. By selecting, the icon will be highlighted

Video File Playback

If you press the click button, video file will be played after buffering process. Buffering Process is displayed as Number and %

Page 18

Music Player Display

Volume Control

Play /Pause

Play Next/ Previous Frame

Damaged/Unplayable File

재생 불가 파일

Delete File

Use Volume +. – of Navigation button while music file playback and volume status will be indicated as a number in the top right of the screen.

Use Pause button to pause the video file playback and press the button again to resume the playback.

Press o r buttons to watch previous/ next video scene while playing. When you want to skip the movie,

If selected file is not a playable or a damaged one, then “This file is damaged or not playable.”message will be shown on the screen and it returns to the folder again.

To delete one file, put cursor on the file and press Menu key shortly. Select as “delete’ and then press ‘select’button, the file is deleted.

4. Video Box

4-2. Playing Video File

▶▶

Video Player Setting

Display size switchover

Subtitle Display

Press Menu While Playing

If you press ‘Menu’ button while playing then it is shifted as the circumstance setting mode of the current file.

Settings

Set video and audio or other setting function or Play mode suites to user’s taste.

Returning to Play mode

After circumstance setting is completed, press ■/ESC button to switchover to the playing

If you press Select button while video file playing, screen size setting is switched. If you select ‘Screen’ then it is displayed fitted to screen size and select ‘Original’ then it is displayed as to the original size.

To play subtitle there should be same file name between video & subtitle file which has extension name as smi. If you do not want to subtitle then off the Caption on Setting>Play mode.

4. Video Box

4-2. Playing Video File

Page 19

5. Image

5-1. Photo Viewer Screen

5. Image

5-2. View Photo File

Image File Playing

Play stop

Press ■/ESC key to stop playback. Then you will enter into Image directory and you can select song you would like to listen and playback.

POWER ON

Press POWER button for Power on.

Image Menu Selection

Transfer to navigation button and select Image and click. By selecting, the icon will be indicated.

Image File Selection

Put cursor on the file you would like to playback from the folder under Image and click. By selecting, the icon will be highlighted

Image File Playback

If you press the click button, Image file is displayed. It can take times to buffering image files. Buffering Process is displayed as Number and %

File name

1580X980Image size

(unit : Pixel)

Title : centrix.jpg

You can see saved image file (JPG) through Photo Viewer.

Page 20

6-1. Snapshot Screen

6. Snapshot

Music Player Display

Image Rotation

Play /Pause

Play Next/ Previous File

Damaged/Unplayable File

재생 불가 파일

Delete File

Use Volume +.- button while image file playback then screen image will be rotated to the Left/ Right.

Use Pause button to pause the music file playback and press the button again to resume the playback.

Press ◀ or ▶ buttons to play previous/ next music file while playing.

If selected file is not a playable or a damaged one, then “This file is damaged or not playable.”message will be shown on the screen and it returns to the folder again.

To delete one file, put cursor on the file and press Menu key shortly. Select as “delete’ and then press ‘select’button, the file is deleted.

◀▶

5. Image

5-2. View Photo File

You can make a Snapshot through built-in camera.

Gives effects on photographing

such as, Normal,

Solarize (Picturesque), Negative

(Film status), Sepia (a bit red),

Black & White status.

Effect

SXGA(1280 X 1024)

VGA(640X480)

QVGA(320 X240)

Resolution

Flash On/ OffFlash

Setting ValuesIcon Info.Icon

Page 21

6-2. Take a Picture

6. Snapshot

Move to Snapshot mode

1. Select Snapshot in main menu.

2. Press Shutter for a moment.

Snapshot

Snapshot is seeing screen beforehand status, if you press shutter or play key you can take a picture. It shows photos taken beforehand and asks whether you will save it. If you wan to save it click “Yes” if not click “No”. Then it returns to preview status.

Camera settings

You can make camera setting by using ◀▶ ▼▲ buttons of setting screen in the below

end and set desired setting and press shutter. You can take a Snapshot as set in the player.

Image saving

Photographed photos are saved in Snapshot directory in the Image menu. If you want to see the photographed photos then transfer to Snapshot directory and select photo file

Snapshot completion

To complete snapshot on preview screen then press ■/ESC key. By pressing ■/ESC key, transferring to main screen is possible.

7-1. Voice recorder screen

7. Voice Recorder

Sampling rate of recording file7

Bit rate of recording file6

Volume status of recording (Mic Gain)5

Balance indicator of Right & Left4

Name of recording file3

Time of recording processed2

Display screen

Recording : Recording is in processing

Ready : Recording standby

①

②

③

④

⑤

⑥

⑦

• You can record conversation or lectures using built-in microphone.

• Microphone is built-in on the top of main body, so you should use it considering the recording direction. (Refer to the name of eac h p art 2- 1 .)

Page 22

7-2. Voice recording

7. Voice Recorder

Completion of recording/ stop

If you press ■/ESC while recording then all the recorded files will be saved in the Voice folder under Music. By pressing ■/ESC key it will transfer to main screen.

Voice Recorder selection

Transfer to ‘ Voice Recorder’ using Navigation button and click it. By selecting Voice Recorder icon will be highlighted.

Recording standby

By pressing Voice Recorder, voice record standby status (Ready) will be displayed and shifted to recording standby status.

Recording

Under recording standby status, recording will be started by pressing II▶button. If you press II▶button one more time, it will be

paused.

Pause/ Release

Press II▶button one more time to pause the screen while playback. Press II▶butto again to record from the pause status again.

7-2. Voice recording

7. Voice Recorder

Recorded file playback

Alteration of Voice Recording Setting

Recorded file is saved automatically in the Voice folder under Music folder. At this point press Play or Select key after searching desired file then you can playback the recorded file.

To change recording setting then transfer to setting Menu and set the functions of Voice Recorder. Recording setting switchover while recording is not available.

Page 23

8. File Manager

8-1. File Manager Screen 8-2. USB Host Function

8. File Manager

• You can transfer and receive data by connecting external storagedevice (device) with MVP-100(Host)without PC connection. USB speed is USB 1.1.

• File Manager is compatible with external storage device which is formatted as FAT 16/32 file system.

Connecting external storage to USB OTG

Transfer files from the host to device

POWER ON

Press the Power button to turn on the power.

Connecting Device

Under all functions of player are stopped, by using USB Host cable connect external storage devices such as digital camera, USB memory Stick to USB Host port.

Selecting File Manager

Put cursor on File Manager and press enter button then a screen showing A:HDD, B:USB will be displayed. If is not correctly connected this screen will not be displayed. Read through above points and connect again.

Selecting Device

Select desired A/B Drive using Navigation button (REW/FF).

MVP-100 is detected

as A:HDD.

External Storage Device is

detected as A:HDD.

HDD USB

Page 24

8-3. Selecting File and Detailed Function

8. File Manager

9-1. Setting menu structure

9. Settings

Amplifier

Balance

Bass Boost

Equalizer

Speaker

Audio

Power Off

LCD Off

Power

OS Update

System info.

Display

System

FunctionMenu

LCD Brightness

Video

LCD Contrast

Saturation

TV Out

Size

Language

Caption

Repeat

Play

Mode

Sampling Rate

Voice

Recorder

Bit Rate

Mic Gain

Slide Timer

Function Menu

Function completion

Press pause button ■/ESC to complete File Manager function then it will transfer to initial screen.

Cable separation

After completion of function, separate USB cable between player & Device. If it is separated while file transferring or copying, it may cause file damage.

All the devices (external storage device) which are connected to this product are powered by this product. If connected device has much power consumption, the connection can be released automatically for product safety.

You can connect devices (external storage device) which is detected on PC without separate Application or need no separate Security function. Some digital cameras and USB Flash memory and etc. are not connected. Some device (external storage device) which is connected to this player is detected only when the power itself is on. Before connecting to this player, be sure of the using procedure.

Release of Device

Device connection unavailable

Put cursor on the selected file and press Menu button, then below popup will be displayed. MOVE TO A(B): Transfer selected file to A(B) COPY TO A(B): Transfer selected file to A(B)

DELETE: Delete selected file. DELETE ALL: Delete all the files

within the selected folder.

Page 25

9. Settings

9-2. System

Item

Functions

Put the cursor on OS Update and press Select key then updated Firmware version saved in the Root is searched. If there is no Firmware saved, it is indicated that there is no Firmware. If there is a Firmware saved, you will be asked whether you will update Firmware. If you select ‘Yes’Firmware update will be processed. Do not operate product during update. After completion of update, power off by pressing power button and reboot the player, then it will be operated as a Firmware updated status.

System info.

Indication

Displays the system info. of player. Product name OS version: Shows the Latest update version HDD: Shows the occupied and empty capacity

9-3. Power

Item

Functions

LCD Off Menu is to set the automatic LCD Off time while pausing and there is no other key operating. LCD is turned off while MP3 playing or voice recording. When key input value is added, LCD is turned on and the setting unit is second. This function is applied for saving battery

Power Off Menu is to set the automatic Power Off time while pausing and there is no other key operating. The setting unit is minute. This function is applied for saving battery

This function is to initialize as a basic setting value. The initial value is as below. LCD OFF: 30 seconds POWER OFF: 10 minutes

Page 26

9. Settings

9-4. Audio

Item

Functions

9-5. Video

You can adjust the contrast between the color. Basic setting is 15.

LCD

Contrast

The basic Video setting value is as below. LCD Brightness : 15, LCD Contrast : 15 Size : Original, Language : English

Default Setting

You can set the Video Display size whether you will adjust it to the original resolution or to the Display size. If you set as Screen size, it will be set as the entire size of TV or LCD.

Size

You can set the display languages such as Korean, English and folder name, file name, ID Tag, Sub title is played as setting language.

Language

You can set the video signal output when Video Out is set as TV. NTSC is applied in USA, Canada, Korea, Japan etc and PAL is applied in Europe, Australia etc.

TV Out

You can set the LCD brightness. Basic setting is 15.

LCD

Brightness

Functions

Item

You can turn on/off the built-in speaker. The basic setting is On.

You can set the Gain value of Audio output. The Low is 20mW/C, Middle is 30mW/C and High is 40mW/C.

You can set Equalizer as Dance, Classic and etc.

You can set the Audio Volume from 0 to 30.

You can set the Balance of Right/Left audio output. When it is +, the right sound is turned on and for -, the left sound is turned on. When it is 0, the Right/Left output is same.

You can set the Audio Bass enhancement.

You can initialize as a basic Audio setting value. The basic setting is as below. Speaker: On Amplifier: Middle Equalizer: Standard Volume: 15 Balance: 0, Bass Boost: Linear

Page 27

9. Settings

9-5. Voice Recorder

Item

Functions

Sampling Rate is to set the sound quality while voice recording. You can select 32KHz & 44.1KHz and with 44.1KHz.

Bit Rate is to select the compress rate while voice recording. You can select 96Kbps & 128Kbps.

Mic Volume is to adjust the Gain value while recording.

You can initialize Voice Recorder setting value. The basic setting value is as below. Sampling Rate: 44.1KHz Bit Rate: 128Kbps Mic Volume: 5

9-6. Play Mode

Item

Functions

Repeat is to set the playback mode while Music Playing. If you select No: No replay If you select Single: Replay of one song selected If you select Folder: Replay of one folder selected If you select All: Replay of Music folder

Caption is to set the turn on or off of the video file subtitle playback. The subtitle is displayed as the same file name(*.smi) as video file.

You can set the timer while Slide show playing of Image. You can set from 1 to 10 seconds. It is not playable if you set as 0

You can initialize as a basic Play Mode setting value. The basic setting value is as below.

Repeat: No Caption: On Slide Timer: 5

Page 28

10. Firmware update

11. FAQ

Transfer from main screen to Setting menu. Transfer to System folder after select System folder from setting menu.

Transfer to

System folder

Put cursor on OS Update and press Select key then it will start to search OS Update version saved in System folder. If there is no Firmware saved, it is indicated that there is no Firmware.

If there is a Firmware saved, you will be asked whether you will update Firmware.

If you select ‘Yes’ Firmware update will be processed. Do not operate product during update.

Update start5

Separate USB cable after saving file in System folder.

USB cable separation

After completion of update, power off by pressing power button and reboot the player, then it will be operated as a Firmware updated status. To check that there is no failure in update, transfer to Setting menu and check OS version of System folder. You can check the status of update completion.

Update

completion

Connect this player to PC with USB Cable. You should connect this player to USB 2.0

jack of PC. When this product is detected as external storage device on PC, save the downloaded OS file to the System folder of player.

File Upload 2

When new OS file is released, save it downloaded from web site (www.centrixclub.com). Check the OS version before saving.

OS Update

File download

• You can upgrade MVP-100 with new OS file.

• Please visit www.centrixclub.com.

• Check whether remote controller Hold key is ‘On’. When Hold key is ‘On’ remote controller does not operate.

Remote controller does not operate.

• Some image file may not be playable according to

the Photo file specification. Check the image file specification of this player.

Photo file does

not play properly.

• Not supported video file or compressed out of

specification, damaged files will not be played. Check supported video file specification in advance.

• WMV file or DTS sounded video file is playable with

conversion at Media Converter program included in Application CD.

• Even it is AVI file, if the video file has Microsoft WMV

format, then it can not be played.

• When you select video file playback, the initial

loading time will be varied according to the kinds of video file.

Video file does

not play properly.

• Music file playback is not possible if the file is not

supported format in this player or compressed out of specification.

• Check supported audio file specification in advance.

No Sound of

Music or Video

files

• This product supports only SMI file playback. The

subtitle file which has the extension name as .smi should have the same file name as video file and be in the same folder.

• Check whether Caption is ‘On’ in Play Mode. When

Caption is ‘OFF’ caption display is not available.

Video caption

does not display.

• There is no source of power or filled with stored data. Check before recording the remaining room for store and organize files.

Recording is not

operated.

• To save the battery if there is no key input while

playing audio file the LCD display is automatically turned off. If you press any key then LCD will turn on again.

• No image will display if display mode is set as TV out.

Power off the player and power on again.

Nothing is

displayed on the

LCD screen.

• Check whether volume is set as 0 or low volume.

• Check whether earphones or wire remote controller is

plugged firmly.

Can’ t hear

anything from

earphones.

SolutionsTroubles

Page 29

11. FAQ

• There is no source of power or filled with stored data. Check before recording the remaining room for store and organize files.

Recording is not

operated.

• LCD off function is designated for extending the playing time. If there is no key input while music playing, recording, viewing photo or USB connecting, the LCD is automatically turned off.

LCD is repeatedly

turned off.

• Power off function is designated for extending the playing time. If there is no key input while playing, the power is automatically off. Press power button to play again.

Power is off

repeatedly.

• If power is off, the player is not detected.

• If the power is weak, the player is not detected as an external storage device. Use after recharging or connecting adapter.

• You should install separate driver under Window 98 version of PC. Install USB 98 Driver in the supplied Application CD.

• Check whether USB Cable is connected to USB2.0 port.

• If it is connected to USB Host, correct to connect to USB2.0 port.

Player is not

detected as an external storage device when it is connected to PC

as an USB device.

• Check whether remote controller Hold key is ‘On’. When Hold key is ‘On’ remote controller does not operate.

Remote controller does not operate.

• This product supports only SMI file playback. The subtitle file which has the extension name as .smi should have the same file name as video file and be in the same folder.

• Check whether Caption is ‘On’ in Play Mode. When Caption is ‘OFF’ caption display is not available.

Video caption

does not display.

SolutionsTroubles

• After purchasing CENTRIX, visit

www.centrixclub.com

site of each country to

subscribe & register under Support section.

How can I make

the customer

• Serial number is pasted on the battery attach part or the side of box.

Where can I find

the serial number?

• File Manager is compatible with external storage device which is made as FAT 16/32 file system.

• When connect to PC, some external storage devices such as digital camera, external HDD which are needed of separate Driver or Application are not detected as an external storage device. Digital camera, external HDD which has no power input or source may not be detected. External storage device which has 500mHa or above power consumption is not detected. Some digital camera or same CENTRIX is detected when power on. Check whether USB Cable is connected to USB Host. If it is connected to USB2.0, correct to connect to USB Host.

External storage

device is not

detected while

connecting to

USB HOST.

SolutionsTroubles

Page 30

12.Specification

12-2. File Playback Specification

12-1. General Specifications

MPEG 1/2/2.5 Layer 3, WMA, OGG,

AC-3, Low Complexity AAC

File Type

Audio

Playable

File Format

Max. 320kbps

Bit Rate

32KHz, 44.1KHz, 48KHzSampling rate

ID3 V1, ID3 V2 2.0, ID3 V2 3.0

Tag

MPEG1, MPEG2, MP@ML, MPEG4 SP & ASP,

( DivX & XviD with MP3 and AC-3)

Direct Play

Video Format

Video

Playable

File Format

DivX or XviD video file with QPEL (Quarter Pixel

motion) / GMC (Global Motion Compensation)/ DTS

Sound encoded, Damaged video files, Video files

with unplayable audio format

Unplayable

Video Format

WMV, ASF

Transcoder

Video Format*

MP3, AAC, AC-3

AC-3(2ch)

Playable

Audio Format

Max. 720 X 480(TV Out)

Resolution

Up to 30fps

Frame Rate

Video : Max. 4Mbps

Audio : Max. 640Kbps

Bit Rate

SMI Format Supportable

Caption

S/N Ratio

Headphone

Out

Frequency

Range

No. of Channel Stereo (L+R)

Audio

20Hz ~ 20Hz

40mW(L)+40mW(R)

Volume & Amp. (16ohm)

96 dB( MP3)

3,5” TFT LCD, QVGA (320 x 240)

LCD

Video

NTSC/PAL , D1(720 X 480)

TV Out

20GB 1.8” HDD

Storage

1.3M Pixel Digital Camera with Flash (SXGA 1280 X 960)

Digital Camera

Specifications

Centrix MVP-100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual