Central Pneumatic Air Compressor 95583 User Manual
TIRE INFLATOR WITH
PRESSURE GAUGE
Model
95583
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2SKU 95583
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Material
ABS reinforced nylon fiber grip, rubber protection ring
on gauge, brass fittings, chrome plated trigger
Maximum PSI 174
Trigger 5-3/16” Long
Dial Gauge 2-1/2”
Gauge Range 0-174 PSI
Air Chuck with Clamp 3/4” L X 1.23 W
Air Inlet 1/4” X 18 NPT
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Keep this manual and invoice in a safe and dry place
for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered compressors in the presence of flammable gases or liquids.
Keep children away. Do not let them handle the Tire Inflator.
Point away from people and pets. When using the Tire Inflator, always keep it
pointed away from people and pet/animals.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for which
it was intended. Do not modify this tool and do not use this tool for a purpose for
which it was not intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in mov-
ing parts. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
1.
2.
3.
4.
5.
6.
7.
Loading...