Central Pneumatic Air Compressor 95211 User Manual

AUTO-REWIND AIR HOSE REEL

MODEL 95211

ASSEMBLY AND OPERA TING INSTRUCTIONS

Due to continuing improvement, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd. Camarillo, CA 9301 1

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight T ools.

For T echnical questions and replacement p art s, please call 1-800-444-3353

SPECIFICATIONS

Overall Dimensions: 7"L X 11-3/4"W X 11-3/4"H Hose Reel Stopper DIA. 2-3/8" DIA. X 1-3/8"H Inside Reel Dimensions: 10-1/8" DIA. X 3-3/4"W Mounting: Wall or Ceiling Mount Hose Diameter: 3/8" Diameter Mounting Hole Diameter: 1/2" DIA. (QTY2) Hose Length: 20 ft. Length Mounting Bracket Dim: 4-1/2"L X 1-3/16"W X 11-13/16"H Fitting Type/Head: 1/4” Male Inlet - 18 TPI Hose Color: Y ellow Maximum Hose Pressure: 300 PSI

SAVE THIS MANUAL

You will need this manual f or the safety warnings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, parts and assembly diagram. Keep your invoice with this manual. Write the invoice n umber on the inside of the front cover . Write the products serial number in the back of the manual near the assembly diagram, or write the month and year of purchase if the product has no serial number. Keep this manual and invoice in a safe and dry place for future reference.

SAFETY WARNINGS AND PRECAUTIONS

Warning: When using this tool, basic safety precautions should alw ays be f ollow ed to reduce the

risk of personal injury and/or damage to the equipment.

READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

1. Keep work area clean: Cluttered work areas invite injuries. This is a high pressure Air Hose and can blow dust, or lightweight articles off workbenches and/or other nearby surfaces.

2. Keep children away: Children can be a distraction. This tool, if used incorrectly can cause injury . Children should ne ver be allow ed to play or loiter around work area.

3. Unplug idle equipment: When not in use, this tool should be unplugged from air pressure source.

4. Dress properly: Do not wear loose clothing or jewelry as they can get caught in moving parts, (such as when the reel is retracting the air hose). Protectiv e long slee v e shirt, long pants and hard leather shoes are recommended.

5. Use eye and ear protection: Always wear ANSI-approved impact safety goggles and ear protection.

SKU 95211 Page 2For technical questions, please call 1-800-444-3353.

+ 4 hidden pages