Central Pneumatic Air Compressor 94275 User Manual
®
DUST RECLAIMER KIT
(FOR USE WITH MODEL 94274 INDUSTRIAL BLAST CABINET)
Model 94275
INSTALLATION AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No por tion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 1
Item Description
Product Compatibility For Use with Model 94274 Industrial
Electrical Requirements 115 VAC / 60 Hz / 12.0 Amps / 18,900
Power Cord Type: Ft. Long
Power Plug Type: 3-Prong / Grounded
Holding Capacity Approximately 1-3/4 Gallons
Hose Size/Type 2” Diameter x 3 Ft. Long / Wire Mesh
Overall Dimensions 28-1/2” High x 10” Diameter x 6-1/2” Di-
PRODUCT SPECIFICATIONS
Blast Cabinet
Motor RPM / 1380 Watts
Reinforced
ameter (at bottom)
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 2
ELECTRICAL SAFETY
4. Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry electricity away
from the user.
5. Double insulated tools are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates the need for the
three wire grounded power cord and grounded power supply system.
6. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.
7. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
8. Do not abuse the Power Cord (12). Never use the Power Cord to pull the
Plug from an outlet. Keep the Power Cord away from heat, oil, sharp
edges, or moving parts. Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.
9. When operating a power tool outside, use an outdoor extension cord
marked “W-A” or “W”. These extension cords are rated for outdoor use, and
reduce the risk of electric shock.
PERSONAL SAFETY
10. Stay alert. Watch what you are doing, and use common sense when
operating a power tool. Do not use a power tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 3
12. Avoid accidental starting. Be sure the Power Switch is off before plugging
in. Plugging in power tools with the Power Switch on, invites accidents.
13. Remove adjusting keys or wrenches before turning the power tool on. A
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
14. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
Situations.
15. Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
TOOL USE AND CARE
16. Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
17. Do not use the power tool if the Power Switch does not turn it on or off.
Any tool that cannot be controlled with the Power Switch is dangerous and must
be replaced.
18. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
19. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
20. Maintain tools with care. Keep this product clean. Properly maintained tools
are less likely to malfunction and are easier to control. Do not use a damaged
tool. Tag damaged tools “Do not use” until repaired.
21. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
22. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 4
SERVICE
23. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
24. When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.
2.
This Dust Reclaimer Kit is designed for use only with Model 94274.
Use the right product for the job. Do not attempt to force small tools and
equipment to do the work of larger tools and equipment. There are certain
applications for which this Dust Reclaimer was designed. It will do the job better
and more safely at the rate and speed for which it was intended. Do not modify
this Dust Reclaimer, and do not use this product for a purpose for which it was
not intended.
3.
Maintain labels and nameplates on the Dust Reclaimer. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
4.
Always wear safety impact eye goggles when assembling and using the Dust
Reclaimer. Also, use dust masks or a respirator when using the Dust Reclaimer.
Using personal safety devices reduce the risk for injury.
5. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp
or wet location.
6.
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contains chemicals known [to the State of
California] to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are: Lead from lead-based paints Crystalline silica
from bricks and cement or other masonry products Arsenic and chromium from
chemically treated lumber Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
REV 07j
SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 5
8. Never leave the Dust Reclaimer unattended when it is plugged into an
electrical outlet. Turn off the tool, and unplug it from its electrical outlet before
leaving.
9. Industrial applications must follow OSHA guidelines.
10. Do not allow children to handle or play with this product.
11. Always unplug the Dust Reclaimer from its electrical outlet before
performing any maintenance or changing accessories.
12. Do not use the Dust Reclaimer with any openings blocked. Keep free of
anything that may reduce air flow or hinder motor operation.
13. Do not use the Reclaimer without its Filter (18) in place. Before each use,
make sure the Filter is cleaned of excess debris.
14. This product is designed only to pick up dry debris. Do not use the Dust
Reclaimer to pick up water (or any other liquid) from the floor or containers
such as sinks, tubs, barrels, etc.
15. When mounting the Dust Reclaimer to a wall surface, make sure the wall
and the mounting hardware used (not included) are capable of supporting
the weight of the Dust Reclaimer and its contents.
16. Prior to drilling mounting holes in a wall surface, check to make sure there
are no hidden electrical cables, gas or plumbing pipes in the drilling path.
17. WARNING! This Dust Reclaimer is not intended for use with silica
based abrasives. Silica based abrasives have been linked to severe respiratory
disease such as silicosis. Always use silica substitutes such as aluminum oxide,
glass bead, walnut shell, or brass bead.
18. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a
heart pacemaker could cause interference or failure of the pacemaker.
19. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
20. Do not handle the Power Cord Plug (12) with wet hands. Never plug the
Power Cord of this product into an electrical outlet while standing on a wet
on a wet or damp surface.
SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 6
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided with
the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by a
service facility before use. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1.
2.
3.
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a
low resistance path to carry electricity away from the user, reducing the risk of
electric shock. (See Figure A.)
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached
to an electrically “live” terminal. (See Figure A.)
Your tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration. (See Figure A.)
THIS PRODUCT USES A
3-PRONG PLUG
115 VOLT,
GROUNDED,
ELECTRICAL OUTLET
FIGURE A
SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 7
Loading...