Central Pneumatic Air Compressor 93289 User Manual

®

®

ENGINE CLEANING SPRAY GUN

Model 93289

ASSEMBLY and OPERATING

INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2005 by Harbor Freight Tools® . All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

Specifications

Air Inlet 1/4”-18 NPS
Working Air Pressure 40 PSI, Do not exceed 60 PSI
Air Consumption 7 CFM @ 40 PSI
Dimensions (with cup) 6-1/2” H x 15-1/2” L x 4-1/4” W
Cup Capacity 24 Ounces

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use electrically
powered tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.

4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children. Store all cleaners
out of children’s reach.

5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.

6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.

7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Wear an ANSI approved dust mask or respirator when working around metal, wood,
and chemical dusts and mists.

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines or air hoses.

Page 2SKU 93289 For technical questions, please call 1-800-444-3353.

9. Maintain tools with care. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords and air hoses
periodically and, if damaged, have them repaired by an authorized technician. The
handle must be kept clean, dry, and free from oil and grease at all times.

10. Disconnect air supply. Disconnect air hose when not in use.

11. Avoid unintentional starting. Be sure the Trigger (12) is in the Off position when not
in use and before connecting to an air supply. Do not carry any tool with your finger on
the Trigger (12), whether it is connected to an air supply or not.

12. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.

13. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any control does not operate properly.

14. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.

15. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.

16. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the Spray Gun.

17. Use proper size and type extension cord. If an extension cord is required for the air
compressor, it must be of the proper size and type to supply the correct current to the
air compressor without heating up. Otherwise, the extension cord could melt and catch
fire, or cause electrical damage to the air compressor. Check your air compressor’s
manual for the appropriate size cord.

18. Maintenance. For your safety, maintenance should be performed regularly by a
qualified technician.

19. Compressed air only. Never use combustible gas as a power source.

20. Use proper cleaning fluids. Only use noncorrosive, nonflammable cleaning products
that are compatible with the materials of this tool, and viscous enough to flow easily
through the Nozzle. Only use fluids in the dilution recommended by the manufacturer.

21. WARNING: The brass components of this product contain lead, a chemical known to
the State of California to cause birth defects (or other reproductive harm).

(California Health & Safety code § 25249.5,

et seq.

)

Page 3SKU 93289 For technical questions, please call 1-800-444-3353.