Central Pneumatic Air Compressor 92189 User Manual
SANDBLASTER GUN
®
WITH 4 CERAMIC NOZZLES
Model 92189
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright 2004 by Harbor Freight Tools®. All rights reser ved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
For technical questions or replacement parts, please call 1-800-444-3353.
©
without the express written consent of Harbor Freight Tools.
PRODUCT SPECIFICATIONS
Nozzle S izes 2m m , 2.5m m , 3m m , 3.5m m (Fine, Medium , C ourse G rit
Inlet Size 3/8” – 18 NP T
M axim um W orking Pressure 100 PS I
W orking P ressure 60-100 PSI
Trigger Size/Type 7-1/2” Long w/ Paddle Control G rip
O verall Dim ensions 8-1/2” Long x 1-1/2” Diameter
Additional Features S afety Trigger Lock / Non-Slip V inyl Grip
Weight 1.30 Pounds
Item Description
Sizes
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 9 are
included. If an y parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SAVE THIS MANU AL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed in the following
pages may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate pneumatic equipment in explosive atmospheres, such as in
SKU 92189 For technical questions, please call 1-800-444-3353 PAGE 2
the presence of flammable liquids, gases, or dust. Pneumatic equipment can
create sparkswhich may ignite flammables.
3. Keep bystanders, children, and visitors away while operating a pneumatic
tool. Distractions can cause you to lose control. Protect others in the work area
from debris such as chips and sparks. Provide barriers or shields as needed.
PERSONAL SAFETY
ALSO SEE SPECIFIC SAFETY RULES ON PAGE 4.
1. Stay alert. Watch what you are doing, and use common sense when operating a pneumatic tool. Do not use a pneumatic tool while tired or under
the influence of drugs, alcohol, or medication. A moment of inattention while
operating pneumatic tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts. Always wear ANSI
approved safety glasses and full face shield. Always wear hearing protection.
3. Avoid accidental starting. Be sure the Trigger (42) is off before connect-
ing to the air supply. Carrying pneumatic tools with your hand on the Trigger,
or connecting pneumatic tools to the air supply with the Trigger on, invites accidents.
4. Remove adjusting keys or wrenches before turning on the tool. A wrench
or a key that is left attached to a rotating part of the tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool in unexpected situations.
TOOL USE AND CARE
1. Use clamps or other practical ways to secure and support the workpiece to
a stable platform. Always wear sandblasting gloves. Never point the Nozzle of
the Sandblaster Gun at your gloves. Holding the work by hand is unstable and
may lead to loss of control and injury. Only work on a workpiece that is properly
secured.
2. Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
3. Do not use this tool if the Trigger does not turn it on or off. Any tool that
cannot be controlled with the Trigger is dangerous and must be replaced.
SKU 92189 For technical questions, please call 1-800-444-3353 PAGE 3
Loading...