Central Pneumatic 92924C User Manual
BRAKE FLUID BLEEDER
®
Model 92924
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, or replacement parts, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Item Description
Bleeder Assembly Total Length: 9-1/2”
Container Diameter: 5”
Handle Size: 4” Long w/3” Long Grip
Overall Height: 7-1/2”
Tube Size 8mm OD x 6mm ID x 40” Long
Inlet Size 1/4”-18 NPT
Operating PSI 90-120 PSI
Container Capacity 24 Ounce New Fluid Supply Bottle
34 Ounce Old Fluid Container
Adapter Sizes 1.25”-1.60” / 1.10”-1.45” / 0.95”-1.25” / 0.80”-1.20”
(32mm-41mm / 28mm-37mm / 24mm-32mm / 21mm-30mm)
Unit Weight 1.50 Pounds
UNPACKING
When unpacking, check to make sure all the parts listed in the Parts List on page 10 are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may
result in serious injury.
SA VE THESE INSTRUCTIONS
WORK AREA
1. Keep bystanders, children, and visitors away while operating the Brake
Bleeder/Vacuum Pump. Distractions can cause you to lose control. Protect
others in the work area from injury. Provide barriers or shields as needed.
SKU 92924 For technical questions, please call 1-800-444-3353 PAGE 2
PERSONAL SAFETY
1. Stay alert. Watch what you are doing, and use common sense when operating the Brake Fluid Bleeder. Do not use the tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating the tool may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and jewelry away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
3. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
situations.
4. Use safety equipment. Always wear ANSI approved safety impact goggles and
respirator. Nonskid safety shoes, hard hat, or hearing protection must be used
for appropriate conditions.
TOOL USE AND CARE
1. Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
2. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
3. Maintain tools with care. Keep tools dry and clean. Properly maintained
tools are less likely to malfunction and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
4. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly main-
tained tools.
5. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
1. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
SKU 92924 For technical questions, please call 1-800-444-3353 PAGE 3
Loading...