Central Pneumatic 91064 Assembly And Operating Instructions Manual
®
®
AIR TANK - 15 GALLON
MODEL 91064
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http//www.harborfreight.com
Copyright 2003 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
®
PRODUCT SPECIFICATIONS
Item Description
Tank Capacity 15 Gallons.
Operating Pressure 85-125 PS I.
Air Hose 6’6” Long x 1/4” I.D .
300 M axim um P SI.
Pressure G auge 0-200 PS I / 1-1/2” Diam eter Face.
W heels 5” Diameter x 1-1/2” W .
Air Inlet/Outlet Fittings 1/2” N PT x 3-W ay C oupler.
Drain V alve Assembly Brass, Tw ist-Type.
Pressure R elease Valve Built In To Coupler.
Air H ose C huck Au tom o tive T ype.
Overall Dim ensions 12” Diam eter x 37” High.
Weight 42.50 Pounds.
SAVE THIS MANU AL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List (page 7) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. Keep work area clean and dry. Cluttered, damp, or wet work areas invite
injuries.
2. Keep children away from work area. Do not allow children to handle this
product.
3. Store idle equipment. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment, and keep out
of reach of children.
4. Do not use this product if under the influence of alcohol or drugs. Read
SKU 91064 PAGE 2
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
5. Use eye protection. Wear ANSI approved safety impact eye goggles when
using this product. ANSI approved safety impact eye goggles are available from
Harbor Freight Tools.
6. Dress safely. Do not wear loose clothing or jewelry, as they can become caught
in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts.
7. Do not overreach. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etc.
8. Industrial applications must follow OSHA requirements.
9. Stay alert. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
10. Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace
or repair damaged or worn parts immediately.
11. Replacement parts and accessories: When servicing, use only identical re-
placement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.
12. Maintain this product with care. Keep this product clean and dry for better and
safer performance. For your safety, service and maintenance should be performed regularly by a qualified technician.
13. Use the right tool for the job. Do not attempt to force a small tool to do the
work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the capacity for which it
was intended. Do not modify this tool, and do not use this tool for a purpose for
which it was not intended.
14.
WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors, which
cannot be built into this product, but must be supplied by the operator.
SKU 91064 PAGE 3
Loading...