Central Pneumatic 66103 Set Up And Operating Instructions Manual

TEXTURE PAINT SPRAY GUN

66103

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

SAVE THIS MANUAL

Keep this manual for the safety warn­ings and precautions, assembly, operat­ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.

NOTICE is used to

address practices

not related to personal injury.

CAUTION, without

the safety alert
symbol, is used to address
practices not related to
personal injury.

IMPORTANT SAFETY

Safety Alert Symbol and Signal

Words

In this manual, on the labeling,
and all other information provid­ed with this product:

This is the safety alert

symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.

DANGER indicates

a hazardous
situation which, if not
avoided, will result in death or
serious injury.

WARNING

indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.

CAUTION, used

with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.

INSTRUCTIONS

INSTRUCTIONS PERTAINING

TO A RISK OF FIRE,

ELECTRIC SHOCK, OR

INJURY TO PERSONS

WARNING – When using this Texture

Paint Spray Gun, basic precautions
should always be followed, including:

General

a. To reduce the risks of electric

shock, re, and injury to persons,

read all the instructions before us­ing.

Work area

a. Keep the work area clean and well

lighted. Cluttered benches and dark

areas increase the risks of personal
injury.

b. Keep bystanders, children, and

visitors away while operating the
Texture Spray Paint Gun. Distrac-

tions are able to result in the loss of
control.

SKU 66103 For technical questions, please call 1-800-444-3353. Page 2

Personal safety

a. Stay alert. Watch what you are do-

ing and use common sense when
operating. Do not use while tired
or under the inuence of drugs, al­cohol, or medication. A moment of

inattention while operating increases
the risk of injury.

sure to high intensity noise is able to
cause hearing loss.

h. Risk of Electric Shock. This Tex-

ture Spray Paint Gun is not pro­vided with an insulated gripping
surface. Contact with a ″live″ wire will

also make exposed metal parts of the

tool ″live″ and shock the operator.

b. Dress properly. Do not wear loose

clothing or jewelry. Contain long
hair. Keep hair, clothing, and
gloves away from moving parts.

Loose clothes, jewelry, or long hair
increases the risk of personal injury
as a result of being caught in moving
parts.

c. Avoid unintentional starting. Be

sure the switch is off before con­necting to the air supply. Do not

carry the tool with your nger on the

Spray Gun Trigger, or connect the
tool to the air supply with the Trigger
depressed.

d. Do not overreach. Keep proper

footing and balance at all times.

Proper footing and balance enables
better control in unexpected situa­tions.

e. Use safety equipment. A

dust mask, non-skid safety
shoes and a hard hat must

be used for the applicable
conditions. Wear heavy-duty work
gloves during use.

f. Always wear eye protec-

tion. Wear ANSI-ap-

proved safety goggles.

g. Always wear hearing

protection when using

the tool. Prolonged expo-

i. Avoid body contact with grounded

surfaces such as pipes, radiators,
ranges and refrigerators. There is

an increased risk of electric shock if
your body is grounded.

Tool use and care

a. Do not force the tool. Use the

correct tool for the application. The
correct tool will do the job better and
safer at the rate for which the tool is
designed.

b. Do not use the tool if the switch

does not turn the tool on or off.

Any tool that cannot be controlled
with the switch is dangerous and
must be repaired.

c. Disconnect the tool from the air

source before making any adjust­ments, changing accessories, or
storing the tool. Such preventive

safety measures reduce the risk of
starting the tool unintentionally. Turn
off and detach the air supply, safely
discharge any residual air pressure,
and release the Gun Trigger before
leaving the work area.

d. Store the idle Texture Paint Spray

Gun out of reach of children and

other untrained persons. A tool is
dangerous in the hands of untrained
users.

SKU 66103 For technical questions, please call 1-800-444-3353. Page 3

e. Maintain the tool with care. Keep

this tool clean. A properly maintained
tool is easier to control.

f. Check for misalignment or bind-

ing of moving parts, breakage of
parts, and any other condition that
affects the tool’s operation. If dam-

aged, have the tool serviced before
using. Many accidents are caused
by poorly maintained tools. There is a
risk of bursting if the tool is damaged.

b. Never use oxygen, carbon dioxide,

combustible gases or any bottled

gas as an air source for the tool.

Such gases are capable of explosion
and serious injury to persons.

SAVE THESE

INSTRUCTIONS.

SYMBOLS AND

g. Use only accessories that are

identied by the manufacturer for
the specic tool model. Use of an

accessory not intended for use with

the specic tool model, increases the

risk of injury.

Service

a. Service on this Texture Paint Spray

Gun must be performed only by
qualied repair personnel.

b. When servicing, use only identical,

authorized replacement parts.

Air source

a. Never connect to an air

source that is capable of

exceeding 200 psi. Over

pressurizing the tool may
cause bursting, abnormal operation,
breakage of the tool or serious injury
to persons. Use only clean, dry,
regulated compressed air at the rated
pressure or within the rated pressure
range as marked on the tool. Always
verify prior to using the tool that the
air source has been adjusted to the
rated air pressure or within the rated
air-pressure range.

SPECIFIC SAFETY

INSTRUCTIONS

Symbol Denitions

Symbol Property or statement

n

o

.../min

PSI

ft-lb

BPM

CFM

SCFM

NPT

NPS

No-load speed

Revolutions or reciprocation per
minute

Pounds per square inch of pressure

Foot-pounds of torque

Blows per minute

Cubic Feet per Minute ow

Cubic Feet per Minute ow at

standard conditions

National pipe thread, tapered

National pipe thread, straight

WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
eye protection.

WARNING marking concerning Risk
of Hearing Loss. Wear hearing
protection.

WARNING marking concerning Risk
of Respiratory Injury. Wear NIOSH­approved dust mask/respirator.

Chart continued in next column.

SKU 66103 For technical questions, please call 1-800-444-3353. Page 4