Central Pneumatic 46149 Set Up And Operating Instructions Manual

OIL EXTRACTOR

6 1/4 GALLON

46149

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Cover Revised 09h

SAVE THIS MANUAL

Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.

NOTICE is used to

address practices

not related to personal injury.
CAUTION, without

the safety alert
symbol, is used to address
practices not related to
personal injury.

SAFETY WARNINGS AND

PRECAUTIONS

Safety Alert Symbol and Signal

Words

In this manual, on the labeling,
and all other information
provided with this product:

This is the safety alert

symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.

DANGER indicates

a hazardous
situation which, if not
avoided, will result in death or
serious injury.

WARNING

indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.

CAUTION, used

with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.

KEEP PRODUCT USAGE AREA 1.
CLEAN. Cluttered areas invite

injuries.

KEEP CHILDREN AWAY FROM 2.
PRODUCT USAGE AREA. Do not

allow children to handle this product.
STORE IDLE EQUIPMENT. 3. When

not in use, tools and equipment
should be stored in a dry location to
inhibit rust. Always lock up tools and
equipment and keep out of reach of
children.

DO NOT USE THIS PRODUCT 4.
IF UNDER THE INFLUENCE OF
ALCOHOL OR DRUGS. Read

warning labels on prescriptions
to determine if your judgement or

reexes are impaired while taking

drugs. If there is any doubt, do not
attempt to use this product.

USE EYE AND BREATHING 5.
PROTECTION. Wear ANSI-

approved safety goggles and NIOSH­approved dust mask or respirator
when using this product.

DRESS SAFELY. 6. Non-skid footwear
or safety shoes should be used when
working with this product. Do not
wear loose clothing or jewelry as

Page 2 For technical questions, please call 1-800-444-3353. SKU 46149

they can become caught in moving
parts. Wear a protective hair covering
to prevent long hair from becoming
caught in moving parts.

INDUSTRIAL APPLICATIONS MUST 7.
FOLLOW OSHA REQUIREMENTS.

applications for which this product
was designed. Do not use small
equipment to do the work of larger
industrial equipment. Do not use this
product for a purpose for which it was
not intended.

DO NOT OVERREACH. 8. Keep
proper footing and balance at all
times to prevent tripping, falling, and
back injury, etc.

REPLACEMENT PARTS AND 9.
ACCESSORIES. When servicing,

use only identical replacement parts.
Only use accessories intended for
use with this product. Approved
accessories are available from
Harbor Freight Tools.

STAY ALERT. 10. Watch what you are
doing at all times. Use common
sense. Do not use this equipment
when you are tired or distracted from
the job at hand.

CHECK FOR DAMAGED PARTS.11.
Before using this product, carefully
check that it will operate properly
and perform its intended function.
Check for damaged parts and any
other conditions that may affect the
operation of this product. Replace
or repair damaged or worn parts
immediately.

MAINTAIN THIS PRODUCT WITH 12.
CARE. Keep this product clean and

dry for better and safer performance.
MAINTENANCE: 13. For your safety,

service and maintenance should be

performed regularly by a qualied

technician.

USE THE RIGHT PRODUCT FOR 14.
THE RIGHT JOB. There are certain

SPECIFIC PRODUCT WARNINGS

AND PRECAUTIONS

MAINTAIN A SAFE WORK 1.
ENVIRONMENT. Do not use this

product in or near damp or wet

areas. Keep work area oor free of

oil, grease, and other liquids. Do not
expose this product to rain. Keep
work area well lit. Make sure there
is adequate surrounding work space.

Remove all ammable liquids and

objects from the work area. Do not
operate this product in the presence

of ammable liquids, gases, or dust.

DISCONNECT EQUIPMENT FROM 2.
ITS AIR SUPPLY SOURCE AND
RELEASE ALL COMPRESSED
AIR FROM THE SYSTEM BEFORE
PERFORMING ANY SERVICES OR
MAINTENANCE.

NEVER LEAVE THIS PRODUCT 3.
UNATTENDED WHILE
EVACUATING OIL.

NEVER USE THIS EQUIPMENT 4.
NEAR OPEN FLAMES, HEAT OR
IGNITION SOURCES. ALLOW OIL
TO BE EXTRACTED TO COOL
DOWN TO BETWEEN 70-80° F
BEFORE EXTRACTING OIL.

CLOSE BALL VALVE (4) BEFORE 5.
PRESSURIZATION. Do not attempt

to pressurize Tank (1) with Ball Valve
open.

IF USED OIL DOES NOT 6.
EVACUATE TANK (1) UPON

Page 3For technical questions, please call 1-800-444-3353.SKU 46149