Central Pneumatic 46061 Operating Information Manual
AIR NIBBLER
®
Model 46061
OPERATING INFORMATION
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www .harborfreight.com
Copyright 2001 by Harbor Freight Tools. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor F reight Tools.
For technical questions please call 1-800-444-3353
SPECIFICATIONS TABLE
Item Description
Cutting Capacity 1/16Ó (16 G auge) S teel / 5/64Ó Aluminum
Oper ating PSI 90
Air Consumption 17. 5 CFM @ 90 P S I Continuous Flow
No Load Recipr oc ation 3, 500
Recommended Hose I.D. 3/8Ó
Air Inlet Size 1/4Ó NPT
Length 8-1/4Ó
Weight 1.95 Lbs.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, operating and
maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep this
manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this tool.
5. USE EYE AND HEARING PROTECTION. Wear ANSI approved safety impact
eye glasses and ANSI approved hearing protection when working with this product. ANSI approved safety impact eye glasses and hearing protection are available from Harbor Freight Tools.
SKU 46061 PAGE 2
6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when
working with this product. Do not wear loose clothing or jewelry as they can
become caught in moving parts. Wear a protective hair covering to prevent long
hair from becoming caught in moving parts.
7. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
8. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do
not use this tool when you are tired or distracted from the job at hand.
10. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that
this tool will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this tool.
Replace or repair damaged or worn parts immediately.
11. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only
identical replacement parts. Only use accessories intended for use with this
product. Approved accessories are available from Harbor Freight Tools.
12. MAINT AIN THIS PRODUCT WITH CARE. Keep this tool clean and dry for better
and safer performance.
13. MAINTENANCE: For your safety, service and maintenance should be performed
regularly by a qualified technician.
14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain applica-
tions for which this product was designed. Do not use a small tool or attachment
to do the work of a larger industrial tool or attachment. Do not use this product
for a purpose for which it was not intended.
15. WARNING: The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. USE CLEAN, DRY, REGULATED COMPRESSED AIR AT 90 PSI. Do not ex-
ceed the recommended 90 PSI. Never use oxygen, carbon dioxide, combustible
gases or any other bottled gas as a power source for these tools.
SKU 46061 PAGE 3
Loading...