10 GALLON AIR TANK
40057
ASSEMBLY & OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web Site at : http://www.harborfreight.com
Copyright 2002 by Harbor Freight Tools®. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Rev 12/02
THANK Y OU f or choosing a HARBOR FREIGHT T OOLS product. For future reference , please complete the
owner’s record belo w:
Model______________ Serial No._____________ Purchase Date___________
SA VE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assemb ly.
Technical Specifications
Capacity: 10 Gallons
Maximum Storage PSI: 125 PSI
Gauge Maximum: 200 PSI / 1.4 MPa
Inlet/Outlet Fitting: 1/2" NPT X 3 W ay Coupler
Air Hose Size: 1/4" I.D . X 40" Long
Air Hose Fitting: Automotive Type
Overall Dimensions: 26-1/2" L X 11" H
Weight: 31 LBS.
Safety V alv e: Built-In, Preset at Factory; Blo w Off Pressure = 138 PSI
Valves are co vered under U.S. Patents #4,986,297, #5,127,437.
Tool Use: The Portable Air Tank is an excellent tool for inflating inner
tubes, toys and other inflatables.
Warning: The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that COMMON SENSE AND CA UTION ARE
FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT
MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product if under the influence of alcohol or drugs. Read w arning labels on prescriptions to
determine if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective gloves and non-skid f ootw ear is recommended.
Wear restrictive hair cov ering to contain long hair .
Use eye and ear protection. Always wear ANSI approved impact safety goggles when using this product.
#40057 Page 2Rev 12/02