®
CALIPER - 6” DIGITAL
Model
98851
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright® 2008 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
!
SAVE THIS MANUAL
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no number). Keep this manual and the receipt in
a safe and dry place for future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARNING indicates
a hazardous
situation which, if not
avoided, could result in death
or serious injury.
CAUTION, used
with the safety alert
symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
SKU 98851
For technical questions, please call 1-800-444-3353. Page 2
1. Work area safety
a. Keep out of the reach of children.
b. Wear ANSI-approved safety
goggles during use.
c. Read this manual before use.
d. Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
e. When not in use, store in a dry
location.
f. This Digital Caliper was designed
for specific tasks. Do not modify
this tool and do not use it for purposes for which it was not intended.
g. Do not operate while you are
tired, or under the influence of
alcohol or drugs. A moment of
inattention may result in damage to
your project and/or personal injury.
h. Maintain labels and nameplates
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
WARNING! Read all
instructions
Failure to follow all instructions
listed below may result in
serious injury.
GENERAL AND SPECIFIC
SAFETY RULES
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
SAVE THESE INSTRUCTIONS
CAUTION
NOTICE is used to
address practices
not related to personal injury.
NOTICE
WARNING
!
CAUTION
!
!
!
DANGER
!
Loading...